2006 Grecon PROFIJOINT Jointer and Finger Jointer$84,700

Contact Information

 
  

EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270
Map ItPrint It

  

Jeff Terrill

800-374-5009 ext:349

  

View Seller's Entire Inventory and Information

Contact Seller

  
 
 
 
 
   
 
By using this service, you accept the terms of LumbermenOnline.com Visitor Agreement.

Captcha
Click refresh if text is not readable.  
 
Enter the text exactly as it is shown above. 
 
  
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=63321&FILE=THMB_FJ-0106411.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=63321&FILE=THMB_FJ-0106412.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=63321&FILE=THMB_FJ-0106413.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=63321&FILE=THMB_FJ-0106414.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=63321&FILE=THMB_FJ-0106415.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=63321&FILE=THMB_FJ-0106416.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=63321&FILE=THMB_FJ-0106417.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=63321&FILE=THMB_FJ-0106418.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=63321&FILE=THMB_FJ-0106419.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=63321&FILE=THMB_FJ-01064110.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=63321&FILE=THMB_FJ-01064111.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=63321&FILE=THMB_FJ-01064112.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=63321&FILE=THMB_FJ-01064113.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=63321&FILE=THMB_FJ-01064114.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=63321&FILE=THMB_FJ-01064115.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=63321&FILE=THMB_FJ-01064116.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=63321&FILE=THMB_FJ-01064117.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=63321&FILE=THMB_FJ-01064118.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=63321&FILE=THMB_FJ-01064119.jpg" />

Description

 

GRECON-DIMTER PROFIJOINT Finger Jointer with the following features and specifications: Vertical and horizontal finger joints in a wide variety of patterns. Incoming block from 6" min. to 27.5" max. long; 3/4" min. to 2 " max. thick; 1-1/4" min. to 6" max. wide.Outfeed length up to 20' maximum. Works equally well in hard or soft woods.Equipped with: -- System includes Finger Joint Shaper with traveling transport belt; single shaper with transport belt at the clamping station. -- Shaper section with adjustable limit stop to align package; belt driven hogging unit to cut the reference edge at the block package; top scoring spindle. -- Shaping spindle with belt drive to the spindle; spindle lifting device for 1/2 finger pitch. -- Shaper table guides consist of stabilizing guide rollers. Blocks held during shaping with pressure-controlled horizontal and vertical clamps. -- Package ejection system releases blocks after clamping station opens. -- Shaper table with fixed speed drive. Adhesive application via automatic "Flankenjet" System. -- Shaper capacities: 6" min. to 27-1/2" max. block lengths x 6" max. cutting height. 50 mm dia. shaper spindle powered by a 30 HP motor; hogging spindle accepts a 9.8" dia. hogging head and is powered by a 15 HP motor; with 9.8" dia. dust outlet. -- Press with feeding and pressing processes on (1) working level; incoming blocks are pre-pressed via the press control. Blocks are manually fed via the feed table; final length adjustment by limit stop; press is adjustable for final length. -- With integrated cut-off saw; block guidance with pneumatically controlled top pressure and lateral guides; hydraulic and variable applied pressure via the press cylinder. -- Pre-assembled lengths are cut to length and held on (4) sides as pressure is applied. Pressure depends on the lumber cross-section and is adjusted according to included data. Stock is ejected to the side after pressing. -- Press specifications: 8-Tons max. pressure; 20' max. assembled lengths; 2 HP hydraulic power pack; 3 HP cutoff saw swings a 15" dia. blade; 3.9" dust outlet. -- Performance calculation: 480 Minutes per shift; 12" average block length; 11/16" x 4" average block cross section; shaper operating at (2) tables per minute with (29) blocks in the package and the press cycling (2) cycles per 20' outfeed lengths.With an 85% utilization factor, the Shaper will produce 23,664 linear ft/shift while the Press will assemble 16,320 linear ft./shift.VOLTAGE TRANSFORMER TO OPERATE MACHINE ON 230-VOLT 3-PHASE POWER, $2,100NOTES: -- This is a one owner machine that was only used as needed, maybe 20 hours a week max. There is not an hour meter on the machine. -- Includes one (1) set of tooling

Details

Year:2006

Make:Grecon

Model:PROFIJOINT

Stock Number:FJ-010641

Location:SOUTHEAST,


SELLER'S RELATED INVENTORY

Seller Information

 
  


EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270Map It

  

Jeff Terrill

800-374-5009 ext:349

View Seller's Entire Inventory and Information