2014 Cantek CFS-100/EM-12 End Matcher$64,900

Contact Information

 
  

EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270
Map ItPrint It

  

Jeff Terrill

800-374-5009 ext:349

  

View Seller's Entire Inventory and Information

Contact Seller

  
 
 
 
 
   
 
By using this service, you accept the terms of LumbermenOnline.com Visitor Agreement.

Captcha
Click refresh if text is not readable.  
 
Enter the text exactly as it is shown above. 
 
  
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=57807&FILE=THMB_EM-0101251.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=57807&FILE=THMB_EM-0101252.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=57807&FILE=THMB_EM-0101253.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=57807&FILE=THMB_EM-0101254.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=57807&FILE=THMB_EM-0101255.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=57807&FILE=THMB_EM-0101256.jpg" />

Description

 

CANTEK CFS-100/EM-12 Defector and EM-12 Endmatcher DEFECT AND END-MATCHING SYSTEM consisting of a Cantek model "CFS-100" Optimizing Cut-Off Saw followed by a Cantek "EM 12" Through-Feed End Matcher and with the following specifications and features:Specifications: -- Working dimensions: 4" x 11" or 3.2" x 12" cutting capacity with 18" x 30 mm bore sawblade driven by a 10 HP motor, 3,200 RPM arbor speed; 2.7 HP servo drive feed system drives the stock up to 260 FPM; -- 0.787" Min. distance between crayon marks; requires 75 to 80 PSI at the saw and 100 to 120 PSI at defect blow-off station. -- Machine is ideal for defect cutting finger joint blocks or cutting fixed lengths from a predetermined cutting list; -- Cuts fixed lengths, random blocks and optimization; provides 3 to 5 times higher production than manual cut-off saws, plus 5% + material recovery and 5% yield increase compared to manual cutting.Features: -- Compact and user-friendly design; controller adopts an industrial grade computer that employs a 32-bit floating-point DSP system and features flash and battery backup SRAM for double security; superior to conventional PC-based controls. It can fully eliminate the machine going down or being damaged due to a poor environment, such as, unstable voltage, high temperature, sawdust, etc. -- With defect blow-off system combined with computerized logic control permits the blow-off time and the length of defect to be set as desired; provides efficient defect removal and eliminates defects from bumping against the sawblade, resulting in the machine going down or sawblade damage. -- Computer control provides easy and fast maintenance; feed system driven by a servo motor for fast and accurate motion and position control; max. feed speed up to 260 FPM; cutting rate up to 80 cuts per minute with cutting accuracy within approx. ±1mm /0.40"; control employs a touch screen for easy learning and operation. 48" Long infeed table standard - longer available option; 18" carbide blade included. (5) Cutting modes: -- Adjustable end cuts to a max. of 10 mm (0.4") -- Fixed length of cutting mode -- Sequential cutting mode with (10) sets of cutting sizes held in memory (for sequential cutting mode only) -- Cutting on fluorescent marks with double end trimming -- Reading fluorescent marks with double end trim, fixed length, finger joint block cutting. CANTEK model "EM-12" END MATCHER & FINGER JOINT SHAPER with continuous through-feed system; handles random length min. 10.6" to any length x 0.4" to 1.38" thickness x 12" width capacity.Specifications: -- 295 FPM max. feed speed; 75 FPM based on 6'-6" board lengths; with 118" infeed and 98" outfeed tables; -- 5.5 HP Shaper motors, 1 HP feed motor and 1/2 HP cutter stroke motor. -- Clamping from top and outside side; 40 mm spindle dia.; 6" dia. dust outlets; requires 85 PSI @ 12 CFM and a 12.5 total connected load. Standard features include: Heavy duty self supporting main frame; compact design

Details

Year:2014

Make:Cantek

Model:CFS-100/EM-12

Stock Number:EM-010125

Location:NORTHEAST,


SELLER'S RELATED INVENTORY

Seller Information

 
  


EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270Map It

  

Jeff Terrill

800-374-5009 ext:349

View Seller's Entire Inventory and Information