32" Vertical grinder with 25 HP motor Dentom 624 9500 BTU Furnace automated measured feed controlled by furnace temperature Holding tank for feed from the grinder which is automatically fed to the furnace...that feed is temperature controlled.

Sawmill with cab and deck 20' log deck Dust belt

4 Strand 20' long

Power: 22 kW Electric Max log diameter 100 cm Max width of cut 86 cm Max can’t width 78.5 cm Max depth of cut 33 cm Touch Screen Setworks Head up/down Electric Head forward/reverse Electric Blade guide Electric Blade lube Automatic blade length 5000 mm Blade width 38 mm

Wood-Mizer Rooftop Chain Conveyor 4 Strand Good Condition

Wood-Mizer Sawdust Conveyor 3 phase power: Currently wired 48V0 but it can be wired 240V. The flat length is 21', the elevated is 11', the height is 5', and the width over all is 16".

Wood-Mizer AWV 12" Resaw

2013 Wood-Mizer LT50 Sawmill 47 HP Yanmar Approx 8000 hrs (500 hrs on new engine) Used Regularly

System includes: Wood-Mizer LT 70 Sawmill Wood-Mizer 2 Blade Edger Wood-Mizer 2-Head Resaw Norwood 2- Blade Resaw All powered by electric motors All decks and conveyors

Woods 502M hardwood flooring machine

Woodtech Heavy Duty Moulder Models: WTM-330 – 12” wide – available in 4, 5 or 6 head configurations.WTM-260- 10” wide – available in 4, 5 or 6 head configurations. WTM-230 – 9” wide – available in 4, 5 or 6 head configurations.WTM-200 – 7” wide – available in 4, 5 or 6 head configurations. Electrical Requirements: Operating voltage: 460 Volt/60Hz/3 Phase Features Available: Outboard bearings on WTM-330 Pneumatic hold-downs, and side pressurePLC controlled – LCD readout Heavy duty drive motorsBelt driven spindlesAuto Lubrication Optional: Automatic Infeed Table 7000 RPM 1st Spindle - 15 HP 2nd Spindle - 15HP 3rd Spindle - 15HP 4thSpindle - 255HP 5th Spindle - 25HP 6th Spindle - 15HP 480V 3Phase Schneider Electronics

Woodtech HD Horizontal Band Saw Max. workpiece size: 300mm Thickness of production board: 5–160mm Width of conveyor belt: 375mm Diameter of saw wheel: 711mm Feeding speed: 0-15m/min Hydraulic pressure: 50-60kg/cm Size of saw blade: 185” Length, 2” wide, 1.6mm thick Electrical Requirements: Voltage: 460V/60 HZ/3 phase Full electrical load: 18.5 KW Overall dimension: 2800L x 2200W x 2000H

Woodtech Cabinet Door Sander

Woodtech Modular Full Shop Dust Collection Sizes - 20,000- 77,000 CFM Negative airflow System - Keep the blowers clean, the sawdust or wood chips never damage the fans Multiple Blowers keep your system always running at optimal CFMs European Technology Grecon Spark Detection, All Pipe, Trunkline, and flex pipe included as a package NFPA rated Schneider Electronics

RipMaster400 with Auto skewing - Heavy Duty 60 HP Motor Touchscreen controls 2 movable blades Infeed System with Scanning ( We offer 3D rip optimization as well) Custom outfeeds available. 480V 3Phase Seimens Electronics

Yaskawa Motoman UP50N Robot YR-UP50N-A00 Payload 50kg Control Box Teach Pendant Yaskawa Motoman UP50N Robot Type: YR-UP50N-A00 Payload 50kg

Yates A20-12 Planer Infeed Deck Tilt Hoist 575 V Includes: Misc parts, heads and attachments for S4S and T&G. This system was removed from service this Spring. It is ready to load.

Used Yates American Model B-26, 24” Double Planer, 75HP top, 40HPBottom, top and bottom 10 knife cutterheads, on the fly top and bottom jointers, 3 phase 480volt electrics, slide out lower cutterhead, top fixed cutterhead, 3-3/4” thickness capacity, approx. 20HP hydraulic feed works, power bed raise and lower, sectional pneumatic chip breaker, top infeed/outfeed rubber rollers.

The frame is a massive, compact and solid casting which takes less floor space for its capacity The feed drive is built to stand up under the hardest kind of services The feed rolls are of such design that the advantages of the open side type of construction are combined with of the advantages of the inside The top and bottom head assemblies are of the most substantial construction The top head chip breaker is made of chilled cast iron section, each section being spring loaded and adjustable The side head spindles are short and of large diameter The side head chipbreaker moves in and out with the head and is also provided with an additional screw adjustment for close setting The bedding is continuous throughout the entire length of the machine

Yates American E-12 End Matcher System for tongue and groove flooring includes: Belt, Straight Line Blade, 3-blades, Infeed conveyor to end matcher, transfer conveyor from first machine to second machine, variable speed outfeed conveyor