Strapping Machines Banding For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 3 of 9
164 Results Found
Sort By 
$ 152,500

EXCEL HV10 Automatic Closed End BalerSpecifications: -- Cylinder: 10" -- Main motor: 50 HP -- System pressure: 3,000 PSI -- Cycle time: 17 sec - 13 seconds short stroke -- Bale size: 60" x 45" x 30"Equipped with: -- Hydraulic bale pusher bar -- Tongue and groove corrugated floor -- Shears through tough material

Katie Lechelt
800-374-5009 ext:452
Call

$ 179,500

EXCEL - 2R10, ...Horizontal Auto-Tie BalerSpecifications: -- Main cylinder: 10” -- Eject cylinder: 9”; 6” Bore -- Cycle time: 16 Seconds -- Bale size: 60” x 45” x 30” -- System pressure: 3,000 PSI -- Oil reservoir: 600 Gallons -- Platen force: 235,619 Lbs -- Main motor: (2) 50 HPEquipped with: -- U.S. Wire Tie -- Standard with either left-hand or right-hand eject -- Operator-free operation -- 50 HP TEFC Motor -- "EXCEL Autonetics" with absolute RAM position sensor with electronic display -- U.S. Wire Tie Systems "Automatic 342 Tier" with Turbo Motor -- Industrial Hardened Logic Controller -- Fully lined with: AR "Hardox 400" Replaceable wear liners -- 300-Gallon Hydraulic Reservoir with: Regenerative Circuit (600-gallon 2R10) -- Upper & lower photo eyes (sender/receiver upper photo eye with: Integrated Conveyor control) -- NEMA 12-Rated enclosures and controls with conveyor starter -- CASTELL Key Safety Interlocking Entry System -- Bale Chamber penetration: 2R9 - 27 In.; 2R10 - 24 In. -- Automatic bale release door -- Automatic shear jam correction

Katie Lechelt
800-374-5009 ext:452
Call

$ 284,900

EXCEL 2R10 Horizontal Auto-Tie Baler with ConveyorSpecifications: -- Main cylinder: 10” -- Eject cylinder: 9”; Bore 6” -- Cycle time: 16 Sec -- Bale size: 60” x 45” x 30” -- System pressure: 3,000 PSI -- Oil reservoir: 600 Gallons -- Platen force: 235,619 Lbs -- Main motor: (2) 50 HPEquipped with: -- Bale Discharge Platform -- Steel Belt Feed Conveyor -- Automatic bale release Door -- US Wire Tie -- Standard with either left-hand or right-hand eject -- Operator-free operation -- 50 HP TEFC Motor -- EXCEL Autonetics with absolute RAM position sensor with Electronic display -- US Wire Tie Systems - Automatic 342 Tier with Turbo Motor -- Industrial Hardened Logic Controller -- Fully lined with Hardox® 400 replaceable wear liners -- 300-gallon Hydraulic Reservoir with regenerative circuit (600-gallon 2R10) -- Upper & lower photo-eyes (sender/receiver upper photo-eye with integrated Conveyor control) -- NEMA 12 Rated enclosures and controls with Conveyor starter -- CASTELL key safety interlocking Entry System -- Bale Chamber penetration (S2R9: 27”; 2R10: 24”) -- Automatic bale release door -- Automatic shear jam correction -- Bale discharge platform

Katie Lechelt
800-374-5009 ext:452
Call

$

EXCEL EX60(Non-Ferrous) Horizontal Closed Door Baler With In Feed ConveyorSpecifications: -- Motor: 20 HP. -- Cylinder: 9". -- Ram Force: 190,851 Lbs. -- Feed Opening: 40" x 55". -- Full Bale Chamber Penetration. -- Wear Liners: Hardrock 400 -- Automatic Shear Jam Correction.Price includes Loading onto your Truck.

Katie Lechelt
800-374-5009 ext:452
Call

$

EXCEL 2R63 2-Ram Horizontal BalerSpecifications: -- Main Cylinders: Twin 6" -- Eject Cylinder: 6" -- Main motor: 20 HP -- Cycle Time: 29 Sec -- Overall Force: 159,467 Lbs -- Feed Opening: 60" x 54" -- Bale Size: 60" x 48" x 30"Equipped with: -- U.S. 343 13 Gauge Wire Tier

Katie Lechelt
800-374-5009 ext:452
Call

$

EXCEL - 2R10, ...2-Ram Horizontal Baler with Infeed ConveyorSpecifications: -- Main motor: (2) 50 HP -- Main cylinder: 10” -- Eject cylinder: 9” -- Pit section length with incline: 20’Equipped with: -- US Wire Tier -- Steel belt feed conveyor

Katie Lechelt
800-374-5009 ext:452
Call

$

EXCEL 2R63 2-Ram Horizontal Baler with Feed ConveyorSpecifications: -- Main Cylinders: Twin 6" -- Eject Cylinder: 6" -- Main motor: 20 HP -- Cycle Time: 29 Sec -- Overall Force: 159,467 Lbs -- Feed Opening: 60" x 54" -- Bale Size: 60" x 48" x 30"Equipped with: -- Feed conveyor (48" x 15') -- Bale release door -- US Wire Tier -- Bale discharge table -- Air/Oil heater

Katie Lechelt
800-374-5009 ext:452
Call

$

EXCEL EX-62 Horizontal Closed Door Baler With Infeed ConveyorSpecifications: -- Feed Opening: 54" x 35" -- Main motor: 20 HP -- Cylinders: (2) 6" -- Total Ram Force 159,400 lbsFeatures: -- Infeed rubber conveyor: 48" -- 3" Cleats -- Removable shear blade -- Tongue and groove floor -- Full Penetration -- Loaded on your truck

Katie Lechelt
800-374-5009 ext:452
Call

$ 39,800

GREEN - 60" X 27', ...Steel Belt Type ConveyorSteel Belt Feed Conveyor -- Width: 60" -- Length: 27 Feet -- Lower Horizontal: 10-1/2 Feet -- Drop Off: 10 Feet -- Working: Fine -- Loaded onto your Truck

Katie Lechelt
800-374-5009 ext:452
Call

$

GREENMAX - EPS-AC-100, ...Cold Press DensifierSpecifications: -- EPS Polystyrene Foam Densifier -- Ratio: 50 to 1 -- Volume: 220 Lbs/Hr -- No Conveyor -- Loaded ont your Truck

Katie Lechelt
800-374-5009 ext:452
Call

$ 23,500

GREENMAX - EPS- AC-100, ...EPS Cold Press DensifierSpecifications: -- EPS Compression ratio: 50: 1 -- Crusher power: 2.95 HP -- Production capacity: 220 Lbs per hour -- EPS bock dimensions: 11.8" x 11.8" (W x H) -- Feed hopper door: 31-1/2" x 20.3"Equipped with: -- Screw compression -- Speed control devise -- Polystyrene and Polypropylene

Katie Lechelt
800-374-5009 ext:452
Call

$

(4) HARMONY - M60-CB, ...Vertical Balers with (1) PTR 3400-HD. ...Vertical BalerLot of (5) Vertical Balers; with free loading onto your truck.Specifications:Cylinder: 6"Power unit: 10 HP

Katie Lechelt
800-374-5009 ext:452
Call

$ 29,500

(8) HARMONY - M60-CB, ...Vertical BalersLot of (8) Balers: Loaded on your truck!Specifications: -- Bale size: 60" x 30" x 48" -- Cylinder: 6" x 48" -- Motor: 5 HP -- Hi/Lo Power Unit

Katie Lechelt
800-374-5009 ext:452
Call

$ 46,900

HARMONY T60-XDRC Vertical BalerSpecifications: -- Motor: 20 HP -- Large 10" Cylinder with Twin Torque Tubes -- Bale Size: 30" x 60" x 48" -- Feed Opening: 25" x 60" -- Ram Force: 235,620 LbsEquipped with: -- Conveyor Over the Back: 48" -- Loaded on your Truck!

Katie Lechelt
800-374-5009 ext:452
Call

$

HARRIS - HLO-608A30, ...Wide-Mouth Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 8" -- Main motor: 30 HP -- Tension cylinder: 8" -- Stroke: 10" -- Feed opening: 60" x 45" -- Bail size: 48" x 40" x 72" -- Ram force: 150,796 LbsEquipped with: -- Wide-mouth -- Heavy-Duty construction

Katie Lechelt
800-374-5009 ext:452
Call

$

HARRIS GRIZZLY 240-T100-11/9 2-Ram Horizontal Baler with Conveyor72" Incline Conveyor on this Baler; only (2) years old!Specifications: -- Cylinder: 9" -- (2) Main motors: 100 HP -- System pressure: 5,000 PSI -- Main ram face pressure: 283 PSI -- Ejector ram face pressure: 202 PSIEquipped with: -- Operator control station with PLC control -- 72" Green Machine steel belt infeed conveyor -- L & P Pinnacle Tier

Katie Lechelt
800-374-5009 ext:452
Call

$

HARRIS HRB-SR 2-Ram Horizontal BalerBC-011225: -- Main motor: 100 HP -- Cylinder: 12" -- Bale size: 45" x 45" x 56" -- Force: 198 Tons -- Bale ejector bore: 8" -- Bale ejector force: 88 Tons -- Side ram bore: 6" -- Side ram force: 9 Tons

Katie Lechelt
800-374-5009 ext:452
Call

$ 27,500

HARRIS HAL-60NF-FE-FP NON-FERROUS Closed Door Horizontal Baler with ConveyorSpecifications: -- Main cylinder: 10" -- Main motor: 75 HP -- Bale size: 45" x 30" x 60" -- Feed opening: 60" x 54" -- Door cylinder: 5" -- Cycle time: 15 sec (no load)Equipped with: -- 48"W Steel Pan Infeed Conveyor

Katie Lechelt
800-374-5009 ext:452
Call

$ 69,950

HARRIS HLO-608-AR30 Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 8" -- Feed opening: 60" x 45" -- Main motor: 30 HP -- Bale size: 48" x 40" x VariableEquipped with: -- Auto-Tie system -- Automatic cycle

Katie Lechelt
800-374-5009 ext:452
Call

$ 72,900

HARRIS HLO-608-AR40 Wide-Mouth Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 8" -- Feed opening: 60" x 45" -- Main motor: 40 HP -- Bale size: 48" x 40" x VariableEquipped with: -- Auto-Tie system -- Automatic cycle

Katie Lechelt
800-374-5009 ext:452
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved