BioMass Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 13 of 30
597 Results Found
Sort By 
Recently Added Items
1998 Morbark 22rxl
$66,000
1998 Morbark 22rxl
2015 Morbark 23NCL
$225,000
2015 Morbark 23NCL
2012 Weima TH 1500 Briquette Press
Call For Price
2012 Weima TH 1500 Briquette Press
1992 Granutech-Saturn BIG MAC
Call For Price
1992 Granutech-Saturn BIG MAC
$ 23,500

JBF - HD 38/50, ...Hard Disk Drive ShredderSpecifications: --Shredding blades: 1". -- Cutting zone: 14" x 20". -- Hopper opening: 54" x 30". -- Waste bin volume: 240 Ltr. -- Motor power: 4,000 Watt.

Katie Lechelt
800-374-5009 ext:452
Call

$ 62,100

JEFFREY - 76 WBH, ...Wood Hog -- Wood Hog with: Fixed, 3-lobe, 6-way hammers. -- It has a top infeed powered chain with air cylinders that feed a 30" x 56" opening. -- Features a 700 HP - 890 RPM direct drive motor and soft start. -- There is an Operator's Console with all the controls. -- Complete with: New set of hammers and a new screen.

Bill Christoffersen
800-374-5009 ext:365
Call

Call for Price

JOHNSON LOOSE BAGGING SYSTEMOne Set of (2) Loose Fill Bagging Systems -- Was Bagging Wood Chips in Plastic Bags. -- One Hopper receiving System for the (2) Units -- Two feeding systems -- Complete with Support Legs and Bag Conveyor -- Output Finish Bag Conveyors -- One Unit is Brand New and the Other is in Very Good Working Condition -- Production Rate 6 to 10 Bags Per Minute. -- Could Bag any Type of Free Flowing Material.Price is Loaded on your Truck.

EX-FACTORY INC.
704-841-2001
Call

Call for Price

This system is part of a project that never took off. The machines are new, never installed: - (6) Kahl 39-1000 Pellet Mills - 200 kW (268 HP) Motors: Two are wired at 460v, four at 575v. The other 4 can be rewound for a fee. Manufacturer specs (to be confirmed): Equipment List 6 Pelleting press type flat die 39-1000 Consisting of: 575V, 60 Hz 110 V AC 24 V DC - Divided cast iron case provided with cooling fins in the gear zone - Venting port in pellet mill middle part - Dust and inlet hood with product distributor and a venting port - Main shaft with thrust and radial bearings - Pan grinder head with scrapers and pan grinder rollers made of flame hardened steel - Temperature measuring of the die - Spring assembly, stainless steel - Spacer rings - Discharge unit with special scrapers - Worm gear turning in oil bath, worm wheel made of special bronze, hardened worm - shaft - Fan pulley - Oil pump to lubricate the main bearings, with oil filter, pressure device and thermometer 6 Three phase induction motor For the drive - Voltage: 575V - Motor power: 200 kW at 1,800 RPM - Drive shaft 90x170mm - Protection class: IP65, motor type B3 - Bearing suitable for 18 kN @ x=136mm - Stainless steel nuts and bolts - 12 tension rails • Two pieces per motor 6 Drive accessories for the pelleting press Consisting of: - V-belt pulley - V-belts - V-belt guard, steel construction, lateral walls with special air guiding plates, - indispensable for pelleting press cooling - 6 Roller gap control, type Distamat - For continuous adjustment of the roller head via the hydraulic nut Consisting of: - Hydraulic system for the press - Valve control - Electronic elements for transforming the measuring signals - Output: 4 – 20 mA = 0-5 mm - 6 Central slip ring seal air cleaning - For protection of the pan grinder roller slip ring seals during operation of the press Consisting of: - Air distribution with piping and coupling - Hose with central air connection to the pressed air 6 Oil coolers for the press Designed as oil-to-air heat exchanger Consisting of: - Oil-to-air heat exchanger - Oil pump - Hose connections - Temperature controller - 6 Press outlet box 39-1000 - Stainless steel design Equipped with: - Reversing flap - Inspection opening - Control socket - Aspiration connection, venting port - Pile up indicator - 1 Spare roller head for the 39-1000 - Spare, for easy and quick exchange of the roller head - 6 Automatic press control, type EAPR - Allen Bradley - For automation of pelleting line - Enclosed design, wired ready for connection according to IP 65 Consisting of: - Control and monitoring of all drives and units belonging to the line - Load dependent control of the pelleting press - Min/Max current monitoring of the pelleting press - Slippage monitoring of the pelleting press - Throughput control (t/h) - Visualization of the line on a graphic operator panel - Preselection of the process parameters at the OP - Fault and alarm messages at the OP - Start/s

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 4

unused-new, bulk bags, super sacks, bulk totes, FIBC- flexible intermediate bulk container, New-unused-still packaged on original packaging pallets ( bags were manufactured in October 2011 - were stored in warehouse and still stored inside), 35"x 35"x 25" S/S, weight capacity: 2,200 LBS. SWL (1000KGS) safety factor 5:1, single trip FIBC, factory bag drawing is available in photos or upon request, we have approximately 31,000 bulk bags available, bags are packaged 130 bags per pallet- (MINIMUM ORDER IS ONE PALLET: 130 bags at $3.46 each = $449.80 per pallet and will be sold in pallet quantities) , the bag information tags are labeled with the original sellers name: K.C.B. Kansas City Bag Company, document pouch, top filling spout 14” diameter and 19” long, bottom discharge chute 14” diameter and 19” long- with tabbed gusseted liner , liner, reduced price for purchasing large quantities, bags are stored inside on their original pallets with the original covers strapped to the pallets, ocean container loading available - 5200+ bags fit in a 40 ft container, bags are at our location close to ports, Call for pricing and a freight quote or with any questions. Free samples are available upon request - shipped via UPS ground, used semi-automatic bag filling machines with weight check are available- can be used to fill these bags, nationwide deliver is available, call David @360.864.2800 with any questions or for additional photos or delivered prices to your location nationwide or overseas. Estimated freight cost to northern California is 25 cents per bag in truck load quantities, estimated freight cost to southern California is 35 cents per bag in truck load quantities,

 Toledo, WA
Machinery Scene
360-864-2800
Call

$ 18,500

Kason 72" Shaker Screener Model K72-1-SS Single Deck 2 HP Mounted on 36" Steel Base Came out Running

Carolina Used Machinery
828-773-2204
Call

Call for Price

KAWASAKI FS030L E Palletizing RobotArticulating arm type Palletizing Robot.Specifications: -- Suction cup type "pickup". -- PENDANT 6 AXIS -- Controller Model "D32FD001" -- Capacity: 30 kG (66 Lbs) bags. -- Complete with pendant control station. -- Includes control panel Cabinet. -- Dimension; 98" H x 42" W x 98" L (wooden crate); weight approx. 3,190 Lbs.Loaded on your truckNOTE: (2) Units available!

EX-FACTORY INC.
704-841-2001
Call

$ 4

KCB BAGS BIG SACKS BULK TOTES "NEW"Bulk Bags, never used. -- Bag size: 35" x 35" x 25" S/S. -- 2,200 Lbs, SWL (1,000 kg), Safety factor 5:1. -- Document pouch. -- Fill spout top inlet. -- Bottom discharge chute with flap, liner. -- Min. purchase quantity is 500 bags. -- Special Price for Higher Quantities -- Loaded on your truck

EX-FACTORY INC.
704-841-2001
Call

$ 128,500

2018 Kershaw Klearway 500, 5,531 Hours, Enclosed cab with A/C, Heat; CAT 6.6 250 HP 6 CYL diesel engine; Articulating; Prinoth 550 cutting head; 4x4; Rear winch; 80% rubber. "Always Serviced. Job Ready. Extra Nice!" Price $128,500 Follow us on our website at http://www.rowdenandsons.com and Facebook at Rowden And Sons

 Farmington, GA
Rowden and Sons
706-201-4106
Call

$ 159,000

CUMMINS TIER IV FINAL (74 HP) ENGINE MOUNTED HYD PUMPS 2410 TWO DECK SCREEN 4' X 9' TOP & BOTTOM DECK HYDRAULIC VARIABLE VIBRATING MECHANISM FABRICATED I-BEAM STYLE FRAME RAILS 5.25 CUBIC YARD CAPACITY HOPPER 13' X 42" BELT FEEDER HYD VARI SPEED 10' X 42" UNDERSCREEN CONVEYOR 26' X 24" FINES CONVEYOR 26' X 24" BOTTOM DECK OVERS CONVEYOR 55 GALLON FUEL TANK 85 GALLON HYD RESERVOIR TWO PART URETHANE PAINT WIRELESS TRACK REMOTE REAR LOADER FEED WINGS MANUAL FOLD

 Columbus, OH
Columbus Equipment Company
937-424-7678
Call

Call for Price

MLS Number 12103197 2014 Komatsu PC290 LC-10 Forestry Mulcher 6622 hours (1/2 hours are idling) Komtrax Hour Evaluation Available Komatsu/Cummins QSV6.7 Tier III Engine 42” HD Bucket with New Rockland Thumb 2021 AFE RDM52 Disc Mulching Head with Digging Spade with 600 hours Geith Quick Connect on Boom for Bucket to Mulcher (pin grabber design) Twin HKX Hydraulic Kits with two auxiliary valves 32” TG Pads on 75% Undercarriage New Turbo Clean Cab with Heat/AC and Forestry Front Window (by Shields) Very good running machine

Carolina Used Machinery
828-773-2204
Call

Call for Price

2020 Komptech 3400S Terminator Shredder -652 hours -CAT C9 engine 325 H.P -Single shaft -Remote -On tracks Clean Machine!!!!

 Mid Atlantic, AL
Carolina Used Machinery
828-773-2204
Call

$ 120,000

2012 Komptech Cribus 2800e Trommel -4735 hours -74hp -1/2 1-1/4 in -7ft 2inch drum -Complete records on machine -Will produce up to 220 yards cube per hour

Josh Digirolamo
828-302-7264
Call

$ 489,000

CAT C18 Length 25ft (transport) / 35ft 9in (working) Width 9ft 4in (transport) / 11ft (working) Height 11ft 2in (transport) / 13ft 7in (working) Loading Height 9ft 6in. Discharge Height (10°-35°) 5ft 11in - 13ft 6in.

 Columbus, OH
Columbus Equipment Company
937-424-7678
Call

$ 325,000

new soft start

 Columbus, OH
Columbus Equipment Company
937-424-7678
Call

Call for Price

50ft+ long x 45" inside width "Z" belt conveyor, 10hp contact us for additional photos and pricing & freight rate, loading included, videos of belt operating are available.

 Toledo, WA
Machinery Scene
360-864-2800
Call

Call for Price

Now in stock! Lamtrac 6160T equipped with 6' cutting width Shearex or Prinoth Mulching head! The machine is packed with a Cummins engine and 155 HP to make the most of your mulching needs. The hydraulics on this machine are powered by 45 GPM Pump @ 6000 PSI! Give us a call to see how this Lamtrac can make the difference in your daily production! Includes the following: - Cummins 4.5L T4 Engine with 155HP/ 525TQ - Fuel Capacity: 42 Gallon - DEF Capacity: 5 Gallon - HD Coolers with Reversible Fan - 45 GPM @ 5800PSI Hydraulic Flow - Upgraded Dual Torsion Undercarriage - Improved Pressurized Cab Design - LED lights w/ 360 degrees of vision - Reverse Camera System - Bluetooth Enabled Sound System - Premium Air-ride Seat - New Ergonomic Joysticks - 12VDC Power in Cab - Weight without attachment: 14,860 Lbs - 1 Year/1000 Hour Full Machine Warranty - 2 Year/2000 Hour Powertrain and Hydraulics

 Lake City, Fl
Quality Equipment & Parts
386-833-5458
Call

Call for Price

IN STOCK NOW! Lamtrac 6160T equipped with 6' cutting width Shearex or Prinoth Mulching head! The machine is packed with a Cummins engine and 155 HP to make the most of your mulching needs. The hydraulics on this machine are powered by 45 GPM Pump @ 6000 PSI! Give us a call to see how this Lamtrac can make the difference in your daily production! Includes the following: - Cummins 4.5L T4 Engine with 155HP/ 525TQ - Fuel Capacity: 42 Gallon - DEF Capacity: 5 Gallon - HD Coolers with Reversible Fan - 45 GPM @ 5800PSI Hydraulic Flow - Upgraded Dual Torsion Undercarriage - Improved Pressurized Cab Design - LED lights w/ 360 degrees of vision - Reverse Camera System - Bluetooth Enabled Sound System - Premium Air-ride Seat - New Ergonomic Joysticks - 12VDC Power in Cab - Weight without attachment: 14,860 Lbs - 1 Year/1000 Hour Full Machine Warranty - 2 Year/2000 Hour Powertrain and Hydraulics

 Lake City, Fl
Quality Equipment & Parts
386-833-5458
Call

$ 8,000

REDUCED TO SELL! $8000. Little Chipper 27-5. 7" wide x 2 1/2" H in feed opening. 10' in feed conveyor belt. Designed to chip scraps from table or rip saws into sawdust. Has hydraulic motor. Like new condition.

Sawmill Exchange
713-729-6455
Call

Call for Price

2022 Loftness N38440 G4 Mulcher, Under 50 Hours of Use! Please Call For More Info

 Brainerd, MN
U.S. Equipment Sales
877-451-9525
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved