Biomass Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 5 of 30
597 Results Found
Sort By 
Recently Added Items
1998 Morbark 22rxl
$66,000
1998 Morbark 22rxl
2015 Morbark 23NCL
$225,000
2015 Morbark 23NCL
2012 Weima TH 1500 Briquette Press
Call For Price
2012 Weima TH 1500 Briquette Press
1992 Granutech-Saturn BIG MAC
Call For Price
1992 Granutech-Saturn BIG MAC
$ 325,000

2016 Bandit 2590 Whole Tree Chipper with Rotobec Cabbed Loader. Clean Machine.

 Constantia, NY
Kleis Equipment LLC
315-623-2111
Call

$ 30,000

2014 Bandit 2550 Self Propelled Stump Cutter with Deutz 44 HP Diesel Engine, 1,450 Hours, Tether Cord Remote and Wireless Control, Dual Rear Wheels, Hydraulic Swing Speed, Two Speed Drive, Front Grading Blade, Ready for Work. Width: 35” (89cm) Height: 53” (135cm) Length: 120” (305cm) WEIGHT: Approximately 820kg Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Blakeslee, PA
NEF Equipment
855-251-2648
Call

$ 19,900

1994 Brush Bandit Model 250 Brush Chipper, Equipped with a Cummins 4BTA3.9 Turbo Diesel Engine, Engine reading 2,000 Hours, Rockford Clutch, Machine recently serviced and has a new turbo. Ready for work. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Blakeslee, PA
NEF Equipment
855-251-2648
Call

Call for Price

2021 Bandit Model 15XPC TK Track Chipper, Engine Caterpillar 125 HP Turbo Diesel, ONLY 755 Hours, Hydraulic Winch, Hydraulic Swivel Chute, Hydraulic Flapper o Discharge, Hand Crank Swivel Chute, Excellent Undercarriage, Radio Remote Control. NACD Clutch, Ready for Work. Weight: 6,800 - 7,500 lbs. Length:17’ 3” Width: 6’ 7” Height:8’ 1” Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Winchester, VA
NEF Equipment
855-251-2648
Call

Call for Price

2014 Bandit Beast 4680 Track Horizontal Grinder, Equipped with a Tier 2 CAT C-27 1050 HP Turbo Diesel Engine with 1,800Hours, Reverse Fan ,Compressor , Magnetic Pulley Head on Shorter Length Discharge Chute , Additional Screens all sizes, Undercarriage 95% Wireless Remote Control with Tether Cord Electric Winch for screen installation... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Blakeslee, PA
NEF Equipment
855-251-2648
Call

$ 258,000

2590 Bandit Horizontal Wood Chipper, 2850 Hours, John Deere 600 HP Engine, Nice!

 Elkins, WV
Reckart Equipment Co.
304-614-7939
Call

$ 29,900

1995 BANDIT 280XP MOBILE CHIPPER 3,200 HOURS 8.1 JOHN DEERE 300 HP ENGINE 6 SETS OF KNIVES NEW FEED WHEEL MOTOR GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

 Dover, NH
Granite Heavy Equipment and Finance
603-953-5983
Call

$ 189,900

2002 Bandit 5680 Beast Recycler, Cat 3412E 1050 hp, 80” Wide x 50” tall Mill opening, 3 speed Infeed 2 speed discharge, Radio remote, Magnetic head pulley, Pintal hitch, Extra screens. W 11’11” L 39’6” H 13’ 3” 92,000 lbs 20,000 lbs Tongue weight Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Keene, NH
NEF Equipment
855-251-2648
Call

$ 18,500

2008 Bandit 200XP 86 hp Perkins Diesel. Yellow 12” Disc Brush Chipper. Width. 72 in. Height. 100 in. Length (Open) 202 in. Weight. 5500 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Atlanta, GA
NEF Equipment
855-251-2648
Call

$ 18,500

2007 bandit 200XP 86 Cat diesel engine, Red 12” Disc Brush Chipper Width. 72 in. Height. 100 in. Length (Open) 202 in. Weight. 5500 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Atlanta, GA
NEF Equipment
855-251-2648
Call

$ 525,000

2010 horizontal grinder/chipper mobile track 2800 hours New twin Disc clutch New conveyor New 3 stage pump New cutter mill drive belts Currently mill is converted to chip knives Have all cutterbodies, teeth, screens and gate to convert to grinding.

Carolina Used Machinery
828-773-2204
Call

Call for Price

2012 Bandit 200XP with 86 hp Cat Diesel with auto feed and height adjustable discharge. Width. 72 in. 182.90 cm. Height. 100 in. 254 cm. Length (Open) 202 in. 513 cm. Weight. 5500 lbs. 2494.76 kg. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Atlanta, GA
NEF Equipment
855-251-2648
Call

$ 259,000

2014 3090 BANDIT WHOLE TREE CHIPPER 1,445 TOTAL HOURS GOOD DRUM CAT C-18 ENGINE GOOD FEED CHAIN HYD SHUTE VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN NO PAYMENTS FOR 3 MONTHS WITH GOOD CREDIT GRANITEHE.COM

 Dover, NH
Granite Heavy Equipment and Finance
603-953-5983
Call

$ 495,000

BARKER Boiler and Fuel System built & tested in 2011 as a pilot unit. Successful testing has been completed. This surplus equipment includes the following main features: -- Combustion Temp Capability- 2,000 deg.F.; Steam Flow 24,000 lbs/hr saturated; Steam Pressure 1,500 PSI @ 600 deg. F. -- Fuel Feed rate - 3,000 Lbs/hr at 1/4" biomass (5% moisture) -- Heat Input - 7,500 btu/Lbs HHV @ 22 mmbtu/hr. -- All equipment has less than 2,500 actual operating hours since installation.EQUIPMENT MAJOR COMPONENTS: Combustor, Cyclonic combustion technology, Refractory lined Heat Recovery. Steam Generator. Rotary Drum Dryer for Fuel drying - capable of 30% moisture reduction (at the above combustion parameters) and 1.5 tons per hour (installed as used equipment).BALANCE OF PLANT FUEL FEED SYSTEM: Live-bottom bin, Bunker, Feed conveyors, Wood hog, Vibrating screen, Drag and screw conveyors. Boiler water system - feed pump,water and steam piping Emissions Control: All required baghouses (SJVUAPCD) California permitted. -- Now REDUCED PRICE from $1.5 million !!

Bob Bullin
800-374-5009 ext:346
Call

$ 455,000

Lightly used 2022 Barko 930B now in stock! This massive machine is equipped with the 67L tires and a Prinoth M650H-2350 mulching head. Powered by a 320HP Cummins QSL9 this mulching monster will take down almost anything in its path. Give us a call for more information! Now available!

 Lake City, Fl
Quality Equipment & Parts
386-833-5458
Call

Call for Price

New 2023 BARKO 930B Industrial Tractor Standard Options - Cummins QSL 8.9L T4 Final w/320 HP at 2,200 RPM - Fuel Tank 127 gallon (481 L) - DEF Tank 10 gallon (38 L) - Foot pedal operated hydraulic wet disk brake - Hydraulic axles with differential lock - Remote mounted cooler with auto reversing fan - Certified operators cab with A/C and heater - AM/FM radio with CD player - Nine (9) external LED cab lights 360 Degrees - Air knife windshield cleaning system - Left hand joystick steering, - MD4 7"" touchscreen display - Variable displacement pump and motor - Air compressor with filter and quick connect - High pressure filter on auxiliary circuit - In Cab hydraulic pressure diagnostics - Barko Telematic System (1 Year Free) INCLUDING THE FOLLOWING OPTIONS Industrial Tractor Foot Travel 30,000 # Hydraulic Winch Rear View Camera with Monitor 67Lx34-26 Primex 20 ply New 2023 SHEAREX HM-100SV2 100"" Mulching Head - 100"" Mulching Head Cutting Width - 36 Teeth on rotor - Optimal Target Diameter: 24"" - Approximate weight: 5,095 LBS - 2 x 110 CC Motors - Operating Speed: 2,300 RPM - Bolt on liner - Hydraulic pushbar - Front Deflector - Electronic controls - Barko Bracket - Maintenance Kit - Dewalt Grinder Kit 1 Year / 2,500 Hour Warranty

 Lake City, Fl
Quality Equipment & Parts
386-833-5458
Call

$ 350,000

Available for Rent or Purchase, Clean 2019 Barko 930b Wheeled Mulcher with Ahwi head. Clean Machine Inside and Out.

 Constantia, NY
Kleis Equipment LLC
315-623-2111
Call

Call for Price

BCA - ES-1000, ...Dual Shaft ShredderSpecifications: -- Cutting chamber: 36" x 30" -- Hook knives: 2" -- Main motor: 100 HPEquipped with: -- Hydraulic drive

Katie Lechelt
800-374-5009 ext:452
Call

Call for Price

Bliss Pellet Cooler Model 12-193-4

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 16,750

2022 Blue Diamond 72"" Skid Steer Brush Cutter - Severe Duty Open Front - 72” cutting width - 10"" Cutting Capacity - 4 double-sided blades - 200 CC Piston motor - 27-35 GPM Flow Range - 1” thick blade carrier with serrated edge - Visible pressure gauge to monitor workload - Bolt-on wear shoes to adjust height - Easy machine entry - 1 Year Warranty Call Quality Equipment & Parts for more information!

 Lake City, FL
Quality Equipment & Parts
386-833-5458
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved