Sawmill Equipment For Sale
.gif)
3846 Results Found
$ 5,000
30 HP electric motor w/double pump direct mounter, approx. 100 gal tank, lots of electric control valves, oil cooler, electric control box
$ 5,000
36" wide x 28' long, steel slat conveyor for slabs etc., very good condition
Call for Price
Complete chip mill operation. All machinery will need to be moved from the current facility. System includes: - 29'x11' Log Deck - Emergency log Deck - 50' Log Infeed Conveyor - 57' Incline Bark Conveyor - 60' Deal Processor w/ Recycle Return Conveyor - Log Outfeed - 112' Log Recycle Conveyor - Log Outfeed - Metal Detector - Control Room - Chipper infeed - Carthage 104" 15 Pocket Chipper with 1250 HP Motor (CEM Lite Knife Hardware) - Refurbished Chipper Disc and 1250 HP Motor - Log Peel Bin - (1) 8'x16' Progress Chip Screens with 80' Chip Stacker - #1 Chip Conveyor: 500' - #2 Chip Conveyor: 1000'
$ 195,000
MLS Number 12123201 Small Stud Mill Log deck to feed the Debarker. Max log length 10 ft Max log diameter 18 inch Mainly cut 8 and 9 ft lumber Debarker 18” 6” board edger ( 9 saws moveable hydraulic variable speed) Cut 6” can’t mfg. in 2” material. Can saw 7 x8 cant Max production 25,000 per shift Chip screen 6 x 6 Nicholson Chipper 62” 4 knife horizontal feed Bottom discharge. Twin Scragg 44” diameter saws both moveable Mill is 575-volt 3 phase.
$ 850
diverter for chip loading system, good condition, 1 available
$ 170
Call for Price
Double End Trim Saw with Material Belt
Call for Price
4 Strand 21' Log in feed deck with Stop and Load. Hydraulic drive, 10' wide.
Call for Price
3 Strand log in feed deck w/ stop and load. 10'W x 23'L. Hydraulic Drive
Call for Price
3 strand log in feed deck with stop and load and w/Hydraulic power. 9'W x 17'L
Call for Price
19' 3 Strand Transfer Deck. 9'8"W
Call for Price
5'x 20' 2 Strand Log Deck w/Hydraulic Drive
Call for Price
This wood was all removed from an old mill on South Carolina. It is ready to be loaded out.
$ 11,500
8' wide x 17' long capacity, electric drive, complete unit ready to go
Call for Price
Call for Price
Up-Right XL24 Man Lift Battery Operated over Hydraulics
Call for Price
(20) Units cap. Rapid Discharge Bin, prefabricated for nut & bolt erection, exterior constructed of 12 guage structurally reinforced steel. -- Chips are discharged by (2) hydraulically operated shell clamp type bottom doors for a 78" x 96" free fall opening, opening & closing via (2) 5" dia. double acting cylinders w/stroke of 48", 15 HP hydraulic pump motor with 20-gallon reservoir; braced, wide flange steel beam support structure with 14' truck height clearance. -- Complete with: Weather covers, (1) bin level indicator, embed plates w/detailed foundation plans, operator's platform, upper catwalk w/handrail & (1) caged ladder. - It holds (20) units or the equivalent of 4,000 cu. ft. by volume. - Price includes (1) coat of green primer for exterior & (1) coat of safety yellow for handrailing, ladders & guards. - Price does not include foundation, installation or starters & switches for electric motor. -- This is a representative photo - other sizes are available on application.
$ 500
US gear reducer: variable speed; 5 HP. Price $500.00. As-is/where-is. (Inv. # G-14).
USNR Canter-Sawing Line consisting of: 60' double length infeed section; 10' log rotation section; (ASM sharp chain--NO longer available); 40' infeed section; 6' chipping canter section with 200 HP motors; 7'60" twin band sections with 150 HP motor; 25' outfeed with board off loading; 20' off-feed belt. Price includes removal cost (ready to load); all hydraulic power systems; all Square D motor control centers; Sub-operator's cab with controls included. 2001 model, only operated until 2007. Loaded onto your trucks $245,000 OBO.
Call for Price
3 Guide Milling Machines Good Working Condition Stands Included