Sawmill Equipment For Sale

Schutte model 280.100 Hammer Mill Includes: 125 HP Motor - 480v Includes: (3) Screens: Approx 1", 3/4", 3/8" (to be confirmed) Includes: Stand

Top feed hammermill with 18" x 36" feed opening. Features 250 HP direct drive motor. 1800 rpm. 3/8" hammers. Includes Benshaw softstart with 500 amp breaker. Also includes separate blower with 50 HP motor and softstarter. Ideal machine for secondary grinding to produce a real fine output.

Schutte Hammer Mill #40 S/N 111375-R

Grinder. This machine is a Shutte grinder. With Webster vibratory infeed. Item #C625

Shutte - Buffalo waste grinder, 18" wide, top feed, 3600 rpm's, includes numerous spare parts, good condition and recently in production

18"wide. In very good working condition, There is no power included. Works good to run waste wood thru. Call or write for info Levi Beechy E9050 Carlson Ridge Rd. Westby, WI. 54667 or Call 574 536 1646

Schutte Pallet Hog - Model 56-35 heavy duty horizontal hog.   Features 50 inch wide horizontal feed  opening with top and bottom powered rolls; 50  2-way, reversible swinging hammers with hardsurfaced tips ; 250 HP direct drive electric motor; 3/4" thick screen with 1-3/8" diameter holes;    Rear discharge.   Electrical cabinets included.   Hammers are approximately 1-3/4" x 5" x 8".    Serial #0506071.

Schutte horizontal hog, replaced shaft w/ blower & motor, heavy duty design (ref #162) Call Amy for more information (928) 723-9449

Schutte Hammer Mill 40-HZF with 100HP Electric Motor. No. 172 Attached Blower.

Schutte Swing Hammer Grinder

Schutte Hammer Mill Horizontal Infeed HZF40 w/100HP Electric Motor and Attached Blower

Customer has two SCMI M3 rip saws for sale. One is fully functional and is a parts machine. It functions but the head will not move up.

SELCO - HS0-128A, ...Horizontal Auto-Tie Baler -- Motor: 50 HP -- Cylinder: 8" -- Feed Opening: 36" x 28" -- Conveyor NOT included -- Loaded onto your Truck

SELCO HL60-M Horizontal Closed Door BalerSpecifications: -- Full Penetration. -- Motor: 30 HP. -- Cylinder: 8". -- Feed Opening: 60" x 45". -- Shear Blade. -- Bale Size: 48" x 40" x 72". -- Max: 2,100 Lbs OCC. -- Feeding Cleated Motorized Belt Conveyor: 20' L x 36" W. -- Loaded onto your Truck.

SELCO - HLO-608-A40, ...Wide Mouth Auto-Tie Horizontal BalerSpecifications: -- Bale size: 48"; x 40"; x 72"; -- Main motor: 40 HP -- Cylinder: 8" -- Twister motor: 2 HP -- Cooler motor: 2 HP -- (4) Tension cylinders: 5" BoreEquipped with: -- Conveyor controls -- Shear bar (tapered & serrated)Available NOW!

SELCO HL50 Horizontal Closed Door BalerSpecifications: -- Large corrugated wide-mouth baler. -- Horizontal closed – door. -- Max amps draw 48 amp – max motor amp 39 amp. -- Max motor HP: 30 HP – 60 hz – 3 phase. -- Bale size: 72″ x 36″ x 48″. -- Feed opening: 50″ x 46″ . -- Main pump @ 800 psi. -- Hydraulic pump capacity: 54 GPM. -- Oil reservoir capacity: 180 Gal. -- Cycle time – 20 Sec. -- Ramface pressure : 68 PSI. -- Baling material weight – 1500 – 1800 Lbs. -- Bale volume – 72 cu.ft. -- Main cylinder: 7″ bore, 62″ stroke. -- Door cylinder: 4″ bore, 12″ stroke.

SELCO - HLO-608-A40, ...Wide Mouth Auto-Tie Horizontal BalerSpecifications: -- Bale size: 48"; x 40"; x 72"; -- Main motor: 50 HP -- Cylinder: 8" -- Twister motor: 2 HP -- Cooler motor: 2 HP -- (4) Tension cylinders: 5" BoreAvailable NOW!

SELCO HSO-128A50 HORIZONTAL AUTO-TIE BALER -- Open end type -- 8" Cylinder -- 50 HP motor -- Infeed opening 36" x 28.5" -- Bale size 30" x 40" x variable -- Bale weight up to 1,200 lbs. (OCC) -- Production capacity 2 to 4.5 tph -- Shear blade -- Hopper size 36" x 28.5" -- Ram face pressure 103 psi -- System pressure 2,400 psi -- Platen force 120,637 lbs -- cycle time 11.5 sec. ( no load)

SELCO Model HL-12-LH HORIZONTAL BALER With Infeed Conveyor• 20 HP Motor • 6"; Main Cylinder• Hopper Opening: 50";x 28";• Cycle Time (No Load): 15 seconds• System Pressure: 2,000psi•Total Compression Force: 56,556 lbs

Select 3620 Sawmill Approx 1100 Hours 68 HP John Deere Diesel Engine 4" Blade (Double cut) 32" Band Wheels Hydraulics include: Log Turner, (2) back posts, (2) dogs, (2) tapers, blade tensioning, head lift, carriage feed Frame: 2"x8" frame and crossbars supported by (2) adjustable legs Blade Lubrication: Automatic electric lube Log capacity: 36" Diameter x 20' Long Setworks: (2) Preset and (2) hold/recall buttons Hydraulic rollers on tapers John Deere block heater Lumber offloading platform Trailer package