Sawmill Equipment For Sale

Design Automation 6' 4 Arm Stacker W6x78x56' Live Roll & 45 x 21' 2 Strand Stick Deck with Electric Drive. Softac Tally System

150kw Diesel Genset Generator - Back up for current generator but not used - Was operational prior to my purchase - Not hooked up to a bulk tank for demo - Skid mounted - 3 phase 440 v Call 800-459-2148 for more info.

• Power unit skid • 600-gallon oil tank w/oil • Detroit 12.7L 475HP 60 series diesel engine with heavy-duty clutch & hydraulic pumps • 40 KW belt-drive generator. Good well-maintained unit still used daily. All connected hyd. lines and pumps go along with it. Was used to run a Weinig Hydromat H-2000 moulder and various other hyd. equipment. Would sell as a package deal with the moulder. 570 758 2597

turbo, (no clutch. The engine runs good. Write : Joe Hershberger 5829 South Fork Creek Rd. Liberty, KY. 42539

Detroit 371, Ran it daily before taken out of use, 704-692-6458

671 Diesel Model PTA11112

2004 Detroit Diesel MTU 660 KW Generator Skid Mounted 277/480V - 60Hz 540 Hours Digital Controls

Deutz 6 cylinder air cooled Diesel engine. 135 HP with clutch on frame. Call 800-459-2148 for more info.

Hex 45" Whole Log Metal Detector

The seller has upgraded to a new machine and no longer needs this rip saw. This machine still runs a few times a week at the shop. 15 HP Motor 2 HP Feed Motor 2" Arbor 16" Max blade capacity Chain drive

Diehl model MR-90 Gang Rip Saw Twelve ( 12 ) inch saw arbor width capacity- Roll feed 50 HP 3600 RPM arbor motor -direct coupled wired 480 volts, 3 phase- new motor bearings 2 HP variable speed feed motor 50 to 150 FPM feed speed-variable Four powered top feed rolls- Excellant feed roll gears 12 inch arbor with one (1) sleeve with spacers Adjustable rip fence Serial number : 66M-1668 Cleaned , checked , and painted

DIEHL - DMG -12, ...Profile GrinderSpecifications: -- 1/2" Width cap. and 10-1/2" max. cutting circle. -- 1 HP TEFC Motor with 2,260 RPM grinding spindle. -- (2) 1-13/16" Dia.; 16" X-axis & 6" Y-axis table movement. -- 30° Clockwise & 90° counterclockwise base swivel rotation for face grinding of profile cutters or planer knives. -- +30° to -30° Vertical grinding spindle adjustment. -- 2" In & out adjustment. -- 1" X-Axis & 1-7/8" Y-axis template adjustment. -- 7" Min. & 10" max. grinding wheel dia.Equipped with & Features: --Coolant pump with 5-gallon tank.

DISA NFP 3H OPEN 9,000 CFM 20 HP Enclosureless Baghouse Dust CollectorSpecifications: -- Total filter area: 894 sq. ft.Equipped with: -- DISA "S056-450-CW" 20 HP - 1,755 RPM 208-203/460 V Dual voltage TEFC blower, with Inlet dia. 450 mm (17.72") & Outlet size 16" x 18". -- (48) Approx. 8" Dia. x 8' L "BEANE" media filter bags. -- Trough-style hopper base, with (6) 20" Dia. Discharge openings & Distance from opening to floor 42". -- Galvanized sheet steel frame. -- ALLEN-BRADLEY Switch box, with Push button controls.DE-INSTALLATION & SHIPPING PREPARATION NOTE: Dust Collector is currently palletized to ship and can be loaded from a dock or ground level. It was fully operational without any issues when removed from service and palletized in May 2024. Prior to palletizing, all bags were completely emptied.

DISA NFP 3H OPEN 9,000 CFM 20 HP Enclosureless Baghouse Dust CollectorSpecifications: -- Total filter area: 894 sq. ft.Equipped with: -- DISA "S056-450-CW" 20 HP - 1,755 RPM - 208-230/460 V Dual voltage TEFC blower, with Inlet dia. 450 mm (17.72") & Outlet size 16" x 18". -- (48) Approx. 8" Dia. x 8' L "BEANE" media filter bags. -- Trough-style hopper base, with (6) 20" Dia. Discharge openings & Distance from opening to floor 42". -- Galvanized sheet steel frame. -- ALLEN-BRADLEY Switch box, with Push button controls.DE-INSTALLATION & SHIPPING PREPARATION NOTE: Dust Collector is currently palletized to ship and can be loaded from a dock or ground level. It was fully operational without any issues when removed from service and palletized in May 2024. Prior to palletizing, all bags were completely emptied.

DISA NFP 3H OPEN 9,000 CFM 20 HP Enclosureless Baghouse Dust CollectorSpecifications: -- Total filter area: 894 sq. ft.Equipped with: -- DISA "S056-450-CW" 20 HP - 1,755 RPM - 208-230/460 V Dual voltage TEFC blower, with Inlet dia. 450 mm (17.72") & Outlet size 16" x 18". -- (48) Approx. 8" Dia. x 8' L "BEANE" media filter bags. -- Trough-style hopper base, with (6) 20" Dia. Discharge openings & Distance from opening to floor 42". -- Galvanized sheet steel frame. -- ALLEN-BRADLEY Switch box, with Push button controls.DE-INSTALLATION & SHIPPING PREPARATION NOTE: Dust Collector is currently palletized to ship and can be loaded from a dock or ground level. It was fully operational without any issues when removed from service and palletized in May 2024. Prior to palletizing, all bags were completely emptied.

The seller has confirmed that this Dixie Air dust collection system is in great working/running condition and it is ready to load! - Size: 108-12 - Type: SPB - 50HP - Inlet to the motor - Circumference: 90"

This system was running daily before hte facility shut down 4-years ago. Buyer will need to provide rigging. (240) 4" x 12' Bags 100 HP Main Motor Bags are cleaned by compressed air approx every minute System is approx 1998 Approx 35000-38000 CFM

DIXIE AIR SPB Pulse Jet Dust Collector. -- 16,100 CFM @ 9.5:1 air-to-cloth ratio, round baghouse with (108) cloth filter bags of 12' length resulting in a total approx. 1,695 sq ft of filter media area. -- Ground mounted main Blower with 50 HP motor connected in a negative pressure configuration. -- Automatic reverse pulse cleaning system with differential pressure gauge, positive displacement air pump for pulse clean. -- Galvanized steel bag frames with positive bag bolt down to eliminate leakage and ride-up of bags once installed. -- Walk-In Clean Air Service Plenum. Tangential dirty air inlet. -- Electrical control panel. -- Single cone hopper outlet with 10" Rotary Airlock discharge. -- Horizontal shared transfer auger (about 54' long). -- Steel support structure with access ladder and service platform.Professional disassembly, loading on truck and/or transportation available upon request.NOTE: Unit being sold under this record is pictured on the right side on the first two photos. For the larger diameter unit on the left side (PNEUMAFIL) see record "DO-011265".

Used DODGE TDT26 shaft mounted gear reducer; 25.66:1 ratio, input shaft diameter 2 3/8", bore 5", S/N 1645. Offered as-is where-is. (INV.G-18) Price $2,255.00.

DODGE gear reducer: 194:1 ratio; 10 HP. Price $900.00. As-is/where-is. (Inv. # G-11).