Woodworking Equipment For Sale

LEADERMAC LMC 518 S 5-HEAD (B-R-L-T-B) MOULDER (FEED THROUGH): -- Specifications:Leadermac "SMARTMAC" with a working cap. of 7" x 5". -- Head sequence: Bottom 7.5 HP, right/left 15 HP, top 15 HP and bottom 10 HP motor. -- Spindle dia. 40 MM with cutter-head speed of 6,000 RPM. All spindle adjustments except 1st. bottom head with mechanical digital readouts. -- Features: Pneumatic receding chip-breaker for top spindle. Mechanical digital readout for chip-breaker and pressure element. -- Feed system: Variable speed 20 - 85 FPM, by a 4 HP motor; Short stock driven feed roller at right spindle. Side pressure roller at infeed mounted to infeed table. -- Table plates and fences hard chromed, inside fences 32 mm height for side work profiles. -- Infeed table 2 M (6'6") infeed straightening table, manual table lubricant pump. -- Equipped with: Central lubrication system, full sound & safety enclosure. -- Includes: Used cutter-heads. Operator tools & manuals. -- Electrics conform to UL/CSA & CE specifications.

LEADERMAC 623C Moulder Feed Through 6-Head (B-R-L-T-T-B), working cap. 9-1/16" x 6" capacity. -- Head sequence: Bottom 10 HP, right 10 HP, left 10 HP motor, top 15 HP, top 20 HP, and bottom 15 HP motor. -- Spindle dia. 1-13/16" with cutterhead speed of 6,000 RPM; spindles (all) equipped with mechanical digital readouts, Digiset readouts for left & top spindles. -- Chipbreaker & pressure elements include mechanical digital readouts for accurate positioning; chipbreakers at left & top spindles with pneumatic pressure. -- Feed works: Inverter driven 5 HP feed system with feed speeds fom 20 - 100 FPM. -- Equipped with central lubrication and automatic table lubrication. -- 2 M (6-1/2') infeed table, chromed tables, and fences. -- Swing-away intermediate short piece gearbox opposite left spindle. -- (3) Full width driven rollers in machine bed, lateral side pressure roller at infeed gate. -- Feed jog/inch forward at top spindle and maintenance tools & manuals. -- Includes: (1) Set of full width tooling (spiral carbide tool on first bottom) and corrugated 12/20° heads; operator manual and parts book.

LEADERMAC LMC 530P (Platinum) Moulder Feed Through 5-Head (B-R-L-T-B), working cap. 12" x 6". -- Head sequence: Bottom 15 HP, right 10 HP, left 15 HP motor, top 20 HP and bottom 20 HP motor. -- Spindles: Spindle dia.1-13/16" with cutterhead speed of 7,200 RPM. Spindles (all) equipped with mechanical digital readouts, Digiset readouts for left and top spindles. All horizontal spindles with hydro-loc outboard bearings.Chipbreaker and pressure elements include mechanical Digital readouts for accurate positioning. Chipbreakers at left and top spindles with pneumatic pressure. -- Feed works: Invertor drive 5 HP feed system with feed speeds of 20 - 82 FPM. 2 M (6'6") infeed table, Full width driven adjustable infeed & outfeed rollers in machine bed -- Features: Central lubrication, automatic table lubrication, chromed tables and fences, swing-away intermediate short piece gearbox opposite left spindle, lateral side pressure roller at infeed gate, feed jog/inch forward at top spindle and operator tools & manuals. -- Includes: (1) Set of full width tooling (spiral carbide tool on first bottom) and grease gun for outboard bearing lock. -- Many additional options available to tailor the machine to your specific requirements. -- Training and (12) months Warranty

LEADERMAC LMC 518 S 5-Head (B-R-L-T-B) LEADERMAC "LMC" Feed Through Moulder, "SMARTMAC" with a working cap. of 7" x 5". -- Head sequence: Bottom 7.5 HP, right/left 15 HP, top 15 HP and bottom 10 HP motor. -- Spindle dia. 40 MM with cutter-head speed of 6,000 RPM. All spindle adjustments except 1st. bottom head with mechanical digital readouts. -- Features: Pneumatic receding chip-breaker for top spindle. Mechanical digital readout for chip-breaker and pressure element. -- Feed system: Variable speed 20 - 85 FPM, by a 4 HP motor; Short stock driven feed roller at right spindle. Side pressure roller at infeed mounted to infeed table. -- Table plates and fences hard chromed, inside fences 32 mm height for side work profiles. -- Infeed table 2 M (6'6") infeed straightening table, manual table lubricant pump. -- Equipped with: Central lubrication system, full sound & safety enclosure, and supplied with operator tools & manuals. -- Includes: (1) Set of cutter-heads with reference engraver for first bottom spindle. -- Electrics conform to UL/CSA & CE specifications.

LEDERMAC 523S "SMARTMAC" Feed Through Moulder;5-Head (B-R-L-T-B) with a working cap. 9" x 5". -- Head sequence: Bottom 7.5 HP, right/left 15 HP, top 15 HP and bottom 10 HP motor. -- Spindle dia. 40 mm with cutterhead speed of 6,000 RPM. All spindle adjustments except 1st bottom head with mechanical digital readouts.Features: -- Pneumatic receding chipbreaker for top spindle and Mechanical digital readout for chipbreaker and pressure element. -- Feed system: Variable feed drive 20 - 80 FPM, by a 7.5 HP with Digital Speed Readout. Short stock driven feed roller at right spindle. Side pressure roller at infeed mounted to infeed table. -- Table plates, fences and chipbreaker shoes hard chromed, inside fences 32 mm height for heavy side work profiles. -- Infeed table 2 M (6'6") infeed straightening table, manual table lubricant pump.Equipped with: -- Central lubrication system, full sound & safety enclosure, operator tools & manuals.Includes: -- (1) Year warranty; -- 1st bottom with spiral Carbide cutterhead + (4) Cutterheads included, serrated back dual angle 10° / 20° with machine. -- Electrics conform to UL/CSA & CE specifications. -- (1) LMC 0026LJ Cuttehead setting stand for measuring radial diameter before and after grindding, to determine change in radial diameterOptions: -- Easy Setwork wich includes Schneider 5.7" HMI touch screen control and motorized adjustment of the near side and top heads and feed beam with memory for 200 profiles Add. $ 4,295

LEADERMAC 630P "PLATINUM" Feed Through Moulder; 6-Head (B-R-L-T-T-B), working cap. 12" x 6".Specifications: -- Head sequence: Bottom 15 HP, right 10 HP, left 15 HP, top 20 HP, top 20 HP and bottom 20 HP motor. -- Spindle dia. 1-13/16" (40 mm and 2-1/8" also available) with cutterhead speed of 7,200 RPM. -- Outboard bearings on spindles 1,4,5 and 6. Pneumatic locks on outboard bearing supports on top heads. -- All spindles equipped with mechanical digital readouts, "Dual mechanical" readouts on left and top spindles. Mechanical readouts for pressure elements and chipbreakers; all chipbreakers and pressure elements with pneumatics. -- Feed works: Inverter driven 5 HP feed system with feed speeds of 20 - 100 FPM. -- Infeed table 2M (6'6"), chromed tables and fences. Side pressure roller mounted at infeed. Features and complete with: -- Central lubrication; -- Short stock attachment. -- Automatic table lubrication pump. -- Side pressure roller mounted to infeed table. -- Sound enclosure and includes: (1) set of cutter heads.

LEADERMAC 623P PLATINUM Feed Through Moulder; 6-Head (B-R-L-T-T-B), "PLATINUM" working cap. 9-1/16" x 6". -- Head sequence: Bottom 15 HP, right 10 HP, left 15 HP, top 20 HP, top 20 HP and bottom 20 HP motor. -- Spindle dia. 1-13/16" (40mm and 2-1/8" also available) with cutterhead speed of 8,000 RPM. -- All spindles equipped with electronic digital readouts, "Dual mechanical" readouts on left and top spindles. Mechanical readouts for pressure elements and chipbreakers; all chipbreakers and pressure elements with pneumatics. -- Feed works: Inverter driven 5 HP feed system with feed speeds of 20 - 100 FPM. -- Infeed table 2M (6'6"), chromed tables and fences. Side pressure roller mounted at infeed. -- Includes: Central lubrication, short stock attachment, automatic table lubrication pump, side pressure roller mounted to infeed table and sound enclosure. (1) set of heads.

LEADERMAC HYPERMAC 530 C COMPACT Moulder Feed Through 5-Head (B-R-L-T-B), working cap. 12" x 6" capacity. -- 1 Piece – Extra Heavy Cast Iron Main Frame. Specially heat-treated for maximum stability and minimum vibration78" (2m) long Adjustable Infeed Table and Fence (each adjustable .4") -- Head sequence: Bottom 25 HP, Right 20 HP, Left 20 HP, Top 30 HP, and Bottom 25 HP motor; spindles are manufactured from SCM-440 tool steel (Mitsubishi-Japan) with special heat treating to HR 55C Hardness fitted with-all spindles equipped with mechanical digital readouts. -- Spindles: dia. 1-13/16" with a cutter-head speed of 7,200 RPM., -- Precision Hydro-loc Outboards for horizontal (Top/Btm.) heads, -- Spindles 3 & 4 have Dual Siko Counters on the Radial Set (for fastest head setup -- Chip-breaker and pressure elements pneumatic; include mechanical digital readouts for accurate positioning. -- Powered rise and fall to extra heavy feed support beam by 1 HP / 0.75 kW motor; upper support beam is supported at both the In-feed and Out-feed ends on 2 large columns for best most rigid upper beam support. -- All feed rolls and pressures move with top beam rise and fall, including safety switches at extreme points. -- 8 Top Driven Feed Roll Shafts (each equipped with Multiple 2" wide rolls that can be quickly spaced/positioned or removed as desired). -- (2) Full-width Driven Bottom Bed Rolls, (2) Piece Full-width Bottom Driven In-feed Roll Bottom Rolls have quick up-down adjustment by cam type lift system -- Feed: Inverter drives 5 HP feed system with feed speeds of 20 - 80 FPM. Electronic Digital Speed Readout, Inch forward and reverse to feed with duplicate control at top head position for fast easy setting -- Infeed/Tables: 1.2 M (4'0") in-feed table .012"-.014" chrome thickness chromed tables and fences, central lubrication, automatic table lubrication, (1) short stock attachment. -- Includes: Lift up sound and safety enclosure including safety interlocks and good strobe-free lighting inside the enclosure. Central Lubrication System to all main slides from front of moulder(1) set of cutter-heads, manuals, set up tools and (1) rebuilt top spindle. -- Options Included, Cutter- head measuring stand Included, Precision Hydro-loc Outboard Bearings and Support for horizontal (Top/Btm, heads $ Included. Pneumatic Locks on the Outboard Supports of the Top Head in lieu of Manual Locks are Included. -- Note – With 7200 RPM Spindles running unjointed (Single Knife Finish) you will realize a 20% increase in productivity.Pneumatic Roller Side Pressure Unit between the 1st bottom head and the Fence side head in lieu of spring-tensioned holdover for best-controlled operation & variable pressure to material going through the side heads. Included, Pneumatic Top Head Chip breakers with Independent pressure controls to each position $ Included, top Head Chip Breaker Plates are Hard Chromed & Grooved for Safety Purposes $ Included, Axial Adjustment of the las

6" Wide x 108" long belt with 3/4 oscillation stroke, 3 HP motor (with 3600 FPM belt speed), 40" x 12" table tilts 45ø, fence tilts 45ø, single 5" dust port. -- Machine Dimensions: 58" (L) x 22" ( W) x 47" (H), net weight is 350 lbs.

LHI POWER RIPPER Straight Line "Rip Saw":Will perform 80% of the jobs done by other Straight-line Rips costing up to four times as much.Specifications: -- 10 HP arbor motor - 230V 1-Phase or 220/440V 3-Phase -- 1 HP feed motor and integral feed unit. -- Variable speed drive or 50 to 180 FPM; fixed feed speeds available (150 FPM standard). -- Cogged steel drive wheels, optional non-marking Polyurethane wheels. -- Easy to change 12" dia. blade - just drop the arbor frame, loosen the arbor nut and change blade. -- Fully enclosed blade plus heavy-duty kickback fingers and heavy gauge belt and chain guards. -- Easy-adjust fence with hand crank and positive lock clamps. -- 4' x 5' Table size with right or left-hand fence available.Options & Features: -- Can be set up to rip hardwoods or softwoods up to 2.75" thick and 3/4" plywood or particleboard up to 4' x 8' in size. -- Available with Quick-Set Fence and digital readouts for lightning-fast size changes.Digital readout, add $2,495

Lauderdale Hamilton Straight Line Rip Saw With 10HP Motor

Lauderdale Hamilton Straight Line Rip Saw with 10HP Motor

Lauderdale-Hamilton Straight Line Rip Saw

Lico Rip System with 5-Moving Blades Includes: Infeed, tilt hoist, unscrambler, Lico infeed, 125 HP gang, outfeed tunnel, 75' sort chain Lateral Scanners High speed roller gang with (5) shifting blades: Up to 500 FPM Two Scanmeg scanners Singulating infeed Saw infeed fence Hogging blade to remove inside edging Outside edging falls off and into shredder New system upgrades in 2018

Lobo 3-Head 43″ Wide Belt Sander (+ Flap/Brush Head)43" width cap, Drum, Drum, Combination HeadHead Configuration1st Head: 9"; diameter grooved rubber-covered contact roll, with 20 HP – 1,760 RPM Motor.2nd Head: 9"; diameter grooved rubber-covered contact roll, with 15 HP – 1,760 RPM Motor.3rd Head: Combination Head with 6"; diameter grooved rubber-covered contact roll, smooth steel contact roll, with a 2″ air-inflated finishing platen, & 15 HP – 1,760 RPM Motor.Specifications -- All (3) heads have dial indicators for positioning PLUS a FOURTH dial indicator on the platen. The fourth head is a flap sander brush with 3 HP -- Between heads one and two you will finds hold down shoes. Hold down shoes are used to control a workpiece as it passes through the sander, making it easier to run shorter parts through as well as prevent trailing edges and sniped or dubbed leading edges. -- Overall all capacity is 43″ wide X 5-5/8″ thick. -- Sanding Belt Dim. 43" X 75"Equipped with & Features -- The feed mat, besides having 100% life, is 43″ wide and 7-1/2′ long. -- The feed motor is 3-1/2 HP and has variable speed from 5-45 FPM. -- The “FPC-515"; Touchpad Position Controller with LED Display for programmable thickness adjustment is in near flawless condition.

GB-CIS Single-end 575V / 3 Ph / 60 Hz 5” wide rubber pad conveyor Equipped with industrial motor for full power cutting and sanding capacity

Year: 2006 Working Width: 25mm to 230mm (1" to 9") Working Thickness: 8mm to 120mm (0.31" to 4.72") Bottom Spindles (x2): 40mm diameter, 0-20mm transverse movement, 6000 RPM, 5.5kW (7.5 HP) Top Spindles (x2): 40mm diameter, 0-20mm transverse movement, 6000 RPM, 7.5kW (10 HP) Side Spindles (x2): 40mm diameter, 0-20mm transverse movement, 6000 RPM, 5.5kW (7.5 HP) Configuration: Bottom, Side, Side, Top, Top, Bottom Feed Motor: 4kW (5.5 HP) Elevation Motor: 0.75kW (1 HP)

Lobo 6-Head Moulder 9" Wide capacity

LOCATELLI "OMK-300" Automatic Lathe with Sanding; From automatic feeding to finished product ejection - a complete "Turning & Sanding" System. -- 11-13/16" Max. between centers, 3-1/8" max. & 5/16" min. stock dia., 5.5 HP spindle motor with (3) spindle rotations of 3,020 - 4,580 & 6,400 RPM.6-Station Rotary Carousel/Drum with the following operations: -- Station 1: Pickup and centering of workpiece. -- Station 2: Turning with hydraulically operated roughing & finishing gouge. -- Station 3: Finish turning with hydraulically operated finishing gouge; rough & finish gouges advance via 1.5 HP hydraulic motor at a rate of 0.33 - 52 FPM. -- Station 4: Initial sanding with adjustable 0.5 HP vibrating brush. -- Station 5: Secondary sanding with adjustable 0.5 HP vibrating brush. -- Station 6: Ejection of finished workpiece. -- PLC Function for immediate fault detection and facilitates setup. Complies with CE high standards for operator safety. -- Features: Billet capacity has been increased to a special 5.9" x 5.9" (150 mm square). -- Complete with: Separate operator control panel. -- Includes: Inventory of spare parts and tooling. -- Machine kept under power but has not been used for production for several years.

Loewer Discmaster 6TD Brush Sander Vacuum Bed