Woodworking Equipment For Sale

NEWMAN WHITNEY S-970 DOUBLE SIDED PLANER WITH "QUIET CUT" HEADS - Hard to find 44” width capacity with 7” thickness capacity - S970-44" SN: 17701 - Built: March 1965. Shipped to: Carolina Panel:Lexington NC - Retrofitted with the Helical cutterheads in April 1993 - Includes grinder (handle was bent in storage but can be easily repaired) and dust hood - One door cover has a crack but it does close without any issues - We purchased this in 2013 and never used it. Was in operation when purchased Call 800-459-2148 for more info.

Newman Yates A-20 4 Sided Planer

NEWMAN EPR-24 24" W x 6" Thick Electric Feed Double Roughing Planer, with "QUIETCUT" 10-Knife Helical Carbide Cutterheads & Knife GrinderSpecifications: -- Min. stock thickness 3/8". -- Min. stock length: 51", 48" when Butted. -- Feed speeds 60 - 250 FPM.Equipped with: -- 60 HP - 3,535 RPM Top head motor, 50 HP - 3,525 RPM Bottom head motor. -- 25-3/4"; W x 22"; L x 34"; H Infeed table. -- Anti-kickback fingers. -- (4) 14"; Dia. x 6"; W Top Flat profile pneumatic tire infeed rolls, with 15 HP - 1,740 RPM TEFC Motor. -- (4) 4"; Dia. Bottom gravity infeed rollers. -- (4) 16"; Dia. x 7"; W Top Flat profile pneumatic tire outfeed rolls, with 15 HP - 1,740 RPM TEFC Motor. -- (1) 12"; Dia. Bottom gravity infeed roller. -- Top pressure bar, with replaceable chrome-plated steel wear plate & Air-operated release. -- Top chipmaker, with Pneumatic raising, 3" W spring-loaded sections, Each section with replaceable steel wear toe plate & Independent wear adjustment. -- ACCURATE TECHNOLOGY "ProScale" Digital thickness indicator for Top head. -- Control console & Remote feeder pendant control.Complete with: -- Service Manual. -- Automatic Cut Control. -- "QUIETCUT" 6-1/2" Dia. 10-Knife Helical Carbide Cutterheads, with 7" Cutting circle. -- Knife Grinder. -- (4) Spare 16"; Dia. x 7"; W Top Flat Profile Pneumatic Tire Outfeed Rolls.Machine Dimensions: 120" x 106" x 70" H.Panel Box Dimensions: 32" x 20" x 84" H.Control Cabinet Dimensions: 62" x 14" x 75" H.Control Console 24" x 19" x 38" H.Feeder Control: 18" x 18" x 43" H.

Newman HP-688 Twin Bay Hydraulic Cold Press6-Sections (top platens) each 24" x 30" each, Center posts between third and fourth platens, creating two overall areas of 30" x 74". Specifications: -- Max. fixed opening 48" with 11" cylinder stroke, each platen section has (1) 10" bore with 5" dia. ram cylinder; -- Each platen is 15/16″ thick and it’s back structure is webbed every 5-1/2″ X 7-1/2″. -- Side-mounted self-contained hydraulic system w/tank, 10 HP continuous operating pressure compensating pump. -- Hand-Valves to Cycle Individual Platens with pressure gauges for each platen. -- Idle Pop-Up Bed Rollers in the bottom platen for easy loading and unloading.Over all the press is in excellent condition, is extremely heavily built, and is also a beautiful impressive press in person.

Specially designed haunching machine for beaded face frames, picture frames and decorative cabinetry. This machine uses a specially designed 2-piece carbide insert adjustable cutter. -- The work piece is placed on the table and against the fence and the cutter travels in a vertical motion to achieve the precision cut. -- Any size cut width is attainable by adjusting the width of the cutter and indexing from the fence stops. -- TECHNICAL SPECIFICATIONS -- Motors: 1 @ 1.1 KW (1.5 HP), Voltage: 220/440V/3/60hz, RPM: 6,000 RPM @ 60 hz, Air: 6 Bar, -- TOOLING: Insert Carbide: Milling head 140 mm (5.5"), Height min: no min., width 1/6" (4.2 mm). Max Profile: Height 3.5" (88.9 mm), width no max. -- Machine Dimensions: L x W x H - 40" x 30" x 35". Machine Weight: 675 lbs. -- AVAILABLE OPTIONS (Call for Pricing): Tooling carbide insert head, additional set of inserts, additional flip stops, foot pedal control, left & right digital fence.

Manufacturers Specifications Max Width of Material: 12 in 12-14” blade capacity Production Rate: 45-50 cuts per minute designed for 45 degree vertical cuts Work Tables: 60 inches to the right and left of the saw, Motors: (2) 2.5 HP (3,600 RPM). 220/60/3PH.

---Liquidation Item---Palletized & Ready to Ship with Free Loading! 5,000 CFM 15 HP Enclosureless Baghouse Dust Collector https://exfactoryauctions.com/Detail/DC-230843/event/L051624$1

NORTHFIELD - #4, ...Table SawSpecifications: -- 16" Dia. saw blade cap.; 7.5 HP - 3,450 RPM motor; 1" dia. arbor; 13/16" dado cap. with: Thin collar; blade tilts: 0° - 45°; 32" rip cap. with T-type fence.

Northfield #4 Table Saw - In great working condition - Size: 4 - Serial: 62354 B - Northfield Special Heavy-Duty Motor: - Type: Arbor - HP: 7.5 - RPM: 3450 - Phase: 3 - Cycles: 60 - Code: L - Frame: J58 - Enclosure: TEFC - Winding: R & M - Serial: MS92250LV - Temp Rise: 55°C - Volts: 220 / 440 - Full Load Amps: 21 / 10.5 - Size information: - 1390 lbs. - 44" L x 36" W x 44" H - Weight & measurements are not inclusive of pallet (not shipping info) Call 800-459-2148 for more info.

6” x 24” capacity 2 sided knives on helical cutter head 534 hours in meter

NorthTech 18" Pop-Up Saw. 10hp Motor. #00872

6” width capacity 8” thickness capacity 30 hp main motor, 1.4 hp feed motor 3 hp blower motor…460 volt 3 phase 559 rpm blade speed digital oiling

Northtech Machine NT-GRS-300RF Gang Rip Saw REDUCED Roller feed Max depth of cut is 4". Max width is 12". New Saw Blades And Spacers

Northteck MRS-14-DXL 460v Manufacturer notes: This is a very popular machine and cost effective. New open ended design allows for you to cut wide material up to 27-1/8? wide. Plus spare arbors, lasers, and the optional quick locking, easy to adjust infeed will not break the bank. The Northtech heavy-duty 50 HP multi-rip (“gang-rip”) saw with 15? maximum blade diameter quickly and accurately cuts material up to 4-15/16? thick and 27-1/8” wide. Cutting both sides of your blanks at once provides incredible parallelism, reducing required moulder allowance, and increasing your yield. Laser guides (one included) and an optional 103” fence make proper alignment of even the longest material simple and precise. Variable feed speeds of 25 – 120 FPM and powered height adjustment further improve operator efficiency.

Multiple Rip Saw with One Fixed and One Moveable Blade Two 10 HP Saw Motors, One for Each Blade Width of Fence Movement from Fixed Blade: 0" - 9.45" Moveable Saw Blade Traverse (From Fixed Blade): .78" - 8.35" Minimum Working Length: 12" Maximum Cutting Thickness: 2.56" Maximum Width of Cut from Fence: 17.71" Saw Blade Diameter: 12" Arbor Diameter: 1" Arbor Speed: 4,500 RPM Aluminum Chain w/ Rubber Slat Inserts Width of Feed Chain: 11-3/4" Feed Motor: 2 HP Variable Speed Feed from 39 - 98 FPM Three Rows of Upper Anti-Kickback Fingers Width Setting Drive Motor: 2 HP

Rigid one piece welded steel frame, with 10 HP direct drive spindle motor at 7,800 RPM, 1-1/4" x 4-1/2" stackable multi-cutter spindle to mill stile, rail & raised panel profiles. -- Stackable cutter spindle with push button indexing to significantly reduce set-up time as each station is preset; the change from one cutter to another is achieved via a select switch for each operation. -- Complete with: X - Y Sliding table w/pneumatic holddown. -- 2-way linear movement for straight or arch top doors up to 50" long. -- 5" Dust collection hood, and cutter shield. -- Includes: (1) Cathedral arch templates, (1) complete set of tools.

NORTHTECH - SRS-12NS, ...Straight Line RipsawSpecifications: --15 HP Motor, 1" dia. saw arbor, speed of 4,500 RPM, 8". -- Max. blade cap.: 12". -- Max. depth of cut: 3-5/16". -- Part length: 8" Min. -- Distance between saw & column: 18"; 60" W x 33" table. -- Feed & Chain: 2 HP Feed drive motor; variable feed speeds of: 59 - 72 - 91 - 111 & 137 FPM. --7" Wide double chain, with automatic chain lubrication.Equipped with & Feature: -- Top pressure system with (6) spring loaded holddown rollers. -- Double row antikickback fingers. -- Adjustable infeed fence. -- Safety side guard. -- 4" Dia. dust hood outlet. -- Push button controls. -- Magnetic starters. - Overhead post for laser mounting.

NORTHTECH NT-SRS12 Straight Line Rip Saw: 15 HP - 4,500 RPM Direct drive overhead mounted arbor motor, 1" dia. arbor, 8" - 12" max. blade cap., 3-3/8" max. depth of cut, 8" min. part length. Specifications: -- 18" Distance between saw and column. -- 57" L x 39" W table, table height 31-1/2", floor space required 1,200 x 1,600 mm (48" x 63").. -- 2 HP Variable feed drive, (5) feed speed from 59 - 137 FPM. -- Chain drive with automatic chain lubrication; feed chain track travels on hardened V-way guides. -- Top pressure system with spring loaded holddown rollers, dual anti-kickback devices. Equipped with & Features: -- Micro-adjust rip fence -- Laser Guide Line Light -- Digital auto chain oiler -- Full coverage guards -- 4" Dia. dust hood outlet -- Push button controls, and magnetic starters

NORTHTECH NT-6108ES-6 Edge SanderSpecifications: Sanding Belt is powered by a 3 HP 230/460V motor. -- The platen measures 6-3/4″ X 39″ and has NEW graphite. Rubber covered direct drive pulley. -- Equipped with: (1) 7-3/4" x 37" Adjustable side table and (1) 11-1/2" x 19" Adjustable end table; both side & end tables have vertical table travel w/hand wheel adjustment. Complete with: -- Magnetic controls with overload protection & dust hood with 4" dia. outlet.

Northtech Chop Saw