Dust Collection Systems For Sale

Dust Collection Systems 

Band Mills (Wide) (45) Band Mills (Thin Kerf) (72) Debarkers (80) Edger-Boards (65) Forklifts (59) Gang Saws (52) Hogs and Wood Grinders (222) Portable Sawmills (31) Resaws-Band (168) Scragg Mills (36) Trim Saws (78) Unscramblers (31) Wheel Loaders (78) Wood Chippers - Stationary (153)
Air Compressors (157) Airlocks (23) Banding-Strapping Machines (173) Blowers and Fans (139) Boilers (26) Bolter Saws (1) Carriages (Sawmill) (30) Carriage Drives (Sawmill) (58) Chip Bins (17) Chip Cyclones (26) Chip Screens (38) Chipping Canters (3) Chop Saws (63) Circular Saw Husks (7) Circular Sawmills (90) Conveyors (86) Conveyors Board Dealing (80) Conveyors Deck (Log Lumber) (211) Conveyors General (26) Conveyors-Auger (5) Conveyors-Live Floor (10) Conveyors-Run-Around (4) Conveyors-Vibrating (46) Conveyors Belts (197) Conveyors-Barn Sweep (22) Conveyors-Live Roll (113) Dip Tanks (6) Drills Single-Multiple (1) Drum Dryers (16) Dry Kilns (46) Dump Hoppers (9) Dust Collection Systems (270) Edger Tailing Devices (5) Edgers-Gang (41) Edgers-Slab (6) Edgers-Vertical (6) Electrical (170) Gang Rip Saws (115) GenSets (40) Hammer Mills (8) Hydraulic Power Packs (94) Knife Grinders (39) Laser Lights (7) Log Home Machinery (15) Log Merchandising Systems (14) Log Turners (Sawmill) (38) Lumber Carts (18) Lumber Sorters (6) Lumber Stackers (24) Lumber Stickers (1) Mat Equipment (2) Metal Detectors (35) Misc (100) Operator Cabs (34) Package Saws (2) Parts and Parts Machines (9) Post and Pole Peelers (22) Power Units-Engines (6) Radial Arm Saws (31) Resaws-Circular (3) Scanning Systems (1) Scissor Lifts (54) Screening Systems (10) Setworks - Sawmill (6) Shapers (1) Sharpening Equipment (110) Shavings Baggers (1) Shavings Mills (23) Slab Saws (10) Stake Pointers (4) Step Feeders (3) Straight Line Rips (1) Tilt Hoists (17) Wrap and Packaging (5)

Filtering

Reset All 

thru
 Used     New
Viewing Page 4 of 14
270 Results Found
Sort By 
Recently Added Items
2000 Disa CS-3 MAXI CLEAN SWEEP
Call For Price
2000 Disa CS-3 MAXI CLEAN SWEEP
Murphy MSRE 14RAL Dust Collector
Call For Price
Murphy MSRE 14RAL Dust Collector
$ 14,070

DENRAY 9600 B Down Draft Sanding TableExtra large 48" x 96" table; Comfortable 36" working height. -- Powerful system with 4,800 CFM rating. -- 5 HP Motor with magnetic starter. -- Space-saving self-contained unit w/built-in dust drawers and high efficiency cartridge filters. -- No duct work, no loss of conditioned air. -- 1-1/8" Thick hardwood frame worktable with 3/4" thick MDF board and rubberized surface. -- Fully enclosed unit. -- "Self-Cleaning" System with push button start to force compressed air from a storage tank into the filters and force dust into the dust drawer. -- Floor level air exhaust that can be directed away from operator. -- Quiet operation with only 82 dB. -- Available options; (4) Swivel casters with (2) that lock in place, Auto-Self cleaning timer or muffler.

Bernie Straple
800-374-5009 ext:339
Call

$ 11,865

DENRAY 7200 B DOWN DRAFT TABLELarge 48" x 72" Table. -- 3,900 CFM rating after filters. -- 5 HP Motor w/magnetic starter. -- Space-saving fully self-contained unit: No duct work, no loss of conditioned air. Contains (2) cartridge filters that clean to 0.5 microns. -- Comfortable working height 36". -- 1-1/8" Thick hardwood frame worktable with 3/4" thick MDF board and rubberized surface. -- "Self-Cleaning" System with push button start to force compressed air from a storage tank into the filters and force dust into the dust drawer. -- Floor level air exhaust which can be directed away from the operator. -- 84 dBA Sound level. -- Options include; Timer to automatically clean filters without operator, (4) swivel casters (2) that lock into place, noise reducing muffler (Reduces volume by 10 to 12 dBA),Unit also available in 220 V single-phase.

Bernie Straple
800-374-5009 ext:339
Call

$ 8,695

DENRAY 3660B Down Draft Sanding TableConvenient 36" x 60" table with a 36" working height with DENRAY's Pulse jet Cleaning System. -- Rated at 3,400 CFM for fast, easy removal of dust. -- 2 HP 3-phase motor. -- Space-saving self-contained, double filtration unit with integrated table top surface filter and bottom filters on all (4) sides. -- No duct work, no loss of conditioned air. Sound level 74 dBA. -- 1-1/8" Thick hardwood frame worktable with 3/4" thick MDF board with rubberized surface. -- Also available in 115 V and 220 V single phase

Bernie Straple
800-374-5009 ext:339
Call

$ 9,380

DENRAY 3672 B Downdraft Sanding Table.Convenient 36" x 72" Table, comfortable 36" working height w/ DENRAY's Pulse Jet Cleaning System. -- Rated at 3,500 CFM. -- 2 HP, 3-Phase motor with magnetic starter. -- Self-contained system with 80/20 cartridge filters which clean with a 99.95% capture rate at .5 microns. -- 1-1/8" Thick hardwood frame worktable with 3/4" thick MDF board and rubberized surface. -- Space-saving design with no duct work, no loss of conditioned air. -- Sound level at 78 dBA. -- Available options include: Exhaust chimney, exhaust mufflers to reduce sound level to 10 - 12 dba, casters and filter cleaning auto timer.

Bernie Straple
800-374-5009 ext:339
Call

$ 11,275

DENRAY 9600 Down Draft Sanding Table: Extra long 48" x 96" table with a 36" working height. -- Rated at 4,300 CFM with 3 HP motor. -- This model features the Tube Filtration System which cleans with a 99% capture rate at 1 micron. -- Includes: (4) Swivel casters, including (2) that lock in place. -- No duct work, no loss of conditioned air. -- Comfortable 1-1/8" thick hardwood frame worktable with 3/4" thick MDF board and rubberized surface.

Bernie Straple
800-374-5009 ext:339
Call

$ 8,550

DENRAY 2872 B Down Draft Sanding TableThis model is great for medium sized jobs, and can be used for plastics, woods and finishing materials. The 2872B comes with 80/20 cartridge filters which clean with a 99.95% capture rate at .5 micron. This model comes standard with Denray's "Jet Pulse" push-button cleaning, rubber coated top, along with motor access on the left end and filter access on the right end.Large work surface on this 28" x 72" table with DENRAY'S Pulse Jet Cleaning System. -- Rated at 3,000 CFM, after filters, with 2 HP motor and magnetic starter. -- Space-saving self-contained unit w/built-in dust drawer. -- High efficiency cartridge filters (180 sq. ft. of cloth area) that clean dirty air to .5-micron. -- Includes: Push Button cleaning -- Quiet operation at only 74 dBA sound level. -- Comfortable 36" working height. -- 3/4" Thick steel-reinforced MDF board worktable with "non-marring" rubberized surface. -- This machine can be used in heavy wood, finishes, solid surfaces and stone type materials. -- Available options: -- Explosion Proof Motor (3 Phase only). -- Light Bar. -- Casters. -- Auto-timer. -- Muffler (reduces sound level 10-12 dbs.). -- 100% Spunbond Polyester FiltersCarbon Filter Bank (odor only). -- HEPA Filter bank. --Three-sided Hinged Safety Shield. -- Magnehelic Gauge. -- HDPE Plastic Tabletop. -- Hydraulic Height AdjustmentAlso available in 230V, 460V and 575V 3 Ph..

Bernie Straple
800-374-5009 ext:339
Call

$ 10,650

DENRAY 2872 G Downdraft Sanding Table for Metal GrindingDenray grind downdraft tables are made for the general grinding of ferrous metals and come equipped with water pans built over the filters to help protect them from hot sparks. The flame-retardant 100% Spunbond polyester cartridge filters clean to .5 micron. These tables come equipped with Denray's "Jet Pulse" push-button cleaning, which can be set with an automatic timer.Includes: -- 28" x 72" Table top work area. -- 36" Work height. -- 3 HP motor w/ 3,600 CFM. -- 18" Fan. -- 76 Decibels Sound Level. -- Auto-timer. -- Magnehelic Guage Available Options: -- Explosion Proof Motor (3 Phase only). -- Light Bar. -- Casters. -- Muffler (reduces sound level 10-12 dbs.). --Carbon Filter Bank (odor only). -- HEPA Filter bank. -- Fiberglass Grate top. -- Rubber Mat for Steel Tabletop. -- Stainless Steel Tabletop. -- HDPE plastic tabletop. -- Hydraulic Height Adjustment. -- Smoke Arm. -- Larger Motor/Fan Up-grade?

Bernie Straple
800-374-5009 ext:339
Call

Call for Price

DENRAY - 9600, ...Downdraft Table48" x 96" Table rated at 4,900 CFM; 2 HP motor w/magnetic starter. -- Utilizes a 2-stage filter system; a top filter is cleaned daily via vaccuum and secondary lower bank of steel framed filters that can be cleaned via vacuum when necessary; fully self-contained unit: No ductwork! No loss of conditioned air!Technical Specifications: -- Working height of 36". -- Working table made of 1-1/8" thick hardwood frame with 3/4" thick steel reinforced MDF board. -- Exhaust air comes out at floor level and can be directed away from Operator. -- Sound level 82 dB.

Bernie Straple
800-374-5009 ext:339
Call

Call for Price

DISA CS-3 MAXI Dust collector with Rotary Air Lock. Approx. 16,000 CFM at 8.7:1 air-to-cloth ratio; 1,725 sq. ft. of filter area, with (96) filter bags filtering to 3-micron. -- General Data: CS-3-M consists of (3) modules - one entrance and two with filter bags. Increased filter size and motor HP. -- Comes with: DISA, S56-500 Material Handling fan powered by oversized 60 HP TEFC motor. Fan nominal rating: 15,000 CFM @ 9" SP. Note due to oversized motor this system can go up to about 17,000 CFM for normal pipe run or about 15,000 CFM allowing for larger losses if the pipe runt is long and complex. -- (2) Reverse air bag cleaning modules which clean the bags every (4) hours of operation automatically, each with 2 HP fan motor. -- Complete with: (2) NRS-20 Rotary Air Lock at bottom discharge, Filtered air return unit, 8' support structure to allow for dumpster under Dust Collector. -- Includes: Control panel, motor starters and switches, and Explosion Panels. Material handling main fan w/motor mounted to side of base module. -- 26" diameter inlet pipe, 97" clearance under collector for dump hopper, free standing steel bolt-together structure,

Tony Cornacchione
800-374-5009 ext:432
Call

Call for Price

DISA NFP-2A-OP Dust Collector SystemDesigned for interior application. -- 15 HP material fan motor (1,750 RPM) w/ 6,000 CFM. -- Free standing & floor mounted next to an open frame bag house with a set of (32) bags with 576 sq. ft. of filter media. -- Static pressure at 12.4"-11.3"" wg. -- Discharges into (4) plastic bags. -- Includes: -- Motor starter and switches. -- (4) plastic collection bags. -- (4) 500 mm bag clamps. -- 12" Inlet adapter. Dimension 162″ long X 46″ deep X 139″ tall.

Bernie Straple
800-374-5009 ext:339
Call

Call for Price

DISA NFP-2A-OP Dust Collector SystemDesigned for interior application. -- 15 HP material fan motor (1,750 RPM) w/ 6,000 CFM. -- Free standing & floor mounted next to an open frame bag house with a set of (32) bags with 576 sq. ft. of filter media. -- Static pressure at 12.4"-11.3"" wg. -- Discharges into (4) plastic bags. -- Includes: -- Motor starter and switches. -- (4) plastic collection bags. -- (4) 500 mm bag clamps. -- 12" Inlet adapter. Dimension 162″ long X 46″ deep X 158″ tall.

Bernie Straple
800-374-5009 ext:339
Call

Call for Price

DIXIE AIR SPB Pulse Jet Dust Collector. -- 16,100 CFM @ 9.5:1 air-to-cloth ratio, round baghouse with (108) cloth filter bags of 12' length resulting in a total approx. 1,695 sq ft of filter media area. -- Ground mounted main Blower with 50 HP motor connected in a negative pressure configuration. -- Automatic reverse pulse cleaning system with differential pressure gauge, positive displacement air pump for pulse clean. -- Galvanized steel bag frames with positive bag bolt down to eliminate leakage and ride-up of bags once installed. -- Walk-In Clean Air Service Plenum. Tangential dirty air inlet. -- Electrical control panel. -- Single cone hopper outlet with 10" Rotary Airlock discharge. -- Horizontal shared transfer auger (about 54' long). -- Steel support structure with access ladder and service platform.Professional disassembly, loading on truck and/or transportation available upon request.NOTE: Unit being sold under this record is pictured on the right side on the first two photos. For the larger diameter unit on the left side (PNEUMAFIL) see record "DO-011265".

Tony Cornacchione
800-374-5009 ext:432
Call

Call for Price

The seller has confirmed that this Dixie Air dust collection system is in great working/running condition and it is ready to load! - Size: 108-12 - Type: SPB - 50HP - Inlet to the motor - Circumference: 90"

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

This system was running daily before hte facility shut down 4-years ago. Buyer will need to provide rigging. (240) 4" x 12' Bags 100 HP Main Motor Bags are cleaned by compressed air approx every minute System is approx 1998 Approx 35000-38000 CFM

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Donaldson Torit 2DF8 cartridge dust collector Pulse-jet cleaning Torit Downflo 2 DF 8 Pulse-jet cartridge dust collector Nominal airflow range CFM 1,020 to 6,300 Filter area: 1,520 sq.ft. Voltage 208-460 12”Fan Inlet, 5HP , 3450RPM , 2,200 CFM @10” SP. Large fans available Several different fan types, sizes and HP available Demonstration video of fan running upon request Dismantled & stored in warehouse for prompt delivery Prior use on wood dust inside of a building Several other larger and smaller dust collectors in our warehouse Contact us for pricing including freight upon request

 Toledo, WA
Machinery Scene
360-864-2800
Call

Call for Price

Donaldson Model ECB & ECB-2 Dust Collector - 3-units total Control Panel

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Donaldson Torit 2DF8 cartridge dust collector Pulse jet cleaning Torit Downflo 2 DF 8 Pulse jet cartridge dust collector Nominal airflow range CFM 1,020 to 6,300 Filter area: 1,520 sq.ft. Voltage: 208-460 DOES NOT HAVE THE SUPPORT LEGS Several different fan types, sizes and HP available Demonstration video of fan running upon request Dismantled & stored in warehouse for prompt delivery Prior use on wood dust inside of a building Several other larger and smaller dust collectors in our warehouse Contact us for pricing including freight upon request

 Toledo, WA
Machinery Scene
360-864-2800
Call

Call for Price

Donaldson Torit 25 PJD dust collector Pulse jet filter bag cleaning 25 filter bags 4 ½” diameter x 8ft long. 235 ft of cloth/Filter area 10hp. LMC fan: model 1006M5 TB. Fan motor: Baldor, 10hp, 230/460. 3 phase, 3500 RPM. Frame: 215T

 Toledo, WA
Machinery Scene
360-864-2800
Call

$ 30,000

Donaldson Torit DCE- Environmental Control Booth & Dust Collector Torit ECB-4 Modules, complete with control panel Built dust booth and own lighting. Environmental Control Booth Powerful, Self-Contained Dust Collection The Donaldson Torit® DCE Environmental Control Booth, ECB Work Station, is ideal for finishing works on large and irregularly shaped parts. This self-contained working environment is specially designed to remove fine airborne dust from multiple sources without interfering with workers’ movement or visibility to ensure efficient dust control. The unique booth design is complete with lighting, sound- proofing and built-in dust collection. It requires no ductwork, and re-circulates the cleaned air for reduced energy costs. Workers inside the booth enjoy complete freedom of movement, cleaner air and excellent visibility. The powerful filtration capabilities of ECB Work Station prevent migration of dust to other parts of the plant, protecting workers outside the booth from the dust and noise generated inside the booth. Stand-alone unit for easy moving at the plant High filtration efficiency with Ultra-Web® cartridge filters Freedom of movement and improved visibility Flexibility to increase capacity Requires no ductwork Safely recirculates cleaned air for reduced energy costs

Mitch Stevens
828-773-6986
Call

$ 25,775

DONALDSON / TORIT 2DF-16 Cartridge Dust CollectorSpecifications: -- Holds (16) cartridge filters. -- Includes New AirMax Premium Media Cartridge Filters – fire retardant. -- Total Filter Media Area: 3,616 ft². -- Air-To-Media Ratio @ 8,000 cfm: 2.2:1. -- Automatic Pulse Clean System with differential pressure gauge and sequencing control in enclosure. -- (2) Hopper Outlets with Sealing Drum Cover Kits. -- Steel Support Structure. -- Includes: 20 HP Top Mount, Direct Drive Blower. -- Rated for 8,000 CFM. -- Electrical Motor Starter & Controls. -- Installation/Operation/Maintenance Manuals.Sold with Six Month Mechanical Warranty

Bernie Straple
800-374-5009 ext:339
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved