Edgebanders For Sale

IMA Advantage 500L single sided edgebander - Single sided edgebander for EVA glue - Joint-milling, gluing unit with double coil magazine, top pressure mounted end trimming, pre/flush-trimming, corner rounding, profile– and glue scraper, buffing and smoothing units - Tooling: Multi Milling Unit, 3mm corner rounding unit

MA Hot Melt Glue Edgebander, Designed to allow operation by feeding parts past the glue head using the table and ball rollers, or the part can be vacuum mounted to the table (Vac Pump and Vac Pods included) with the head guided manually around the part with the weight of the applicator head counter-balanced from the boom. Specifications: Board Thickness 16mm to 45mm(0.630" - 1.77"), Strip Height 20mm-50mm (0.78"-1.97"), Strip Thickness 0.4mm to 3mm (0.016" - 0.118"), Glue Tank 0.8Liter (48 Cubic Inches, or 0.8 quart ), Processing Temperature 140 to 220 C Degrees ( 284F-428F). Current running 8 Amps, Glue Pot 1400 Watts, Max Overall Watts 2600. Weight of Movable head 20kg ( Note: this 45 lbs head weight is counter-balanced with spring.) Working height 960mm (37 3/4")

IMA Combiform I/R75/1260/V

Cuts with a 16" carbide tipped saw blade 240V/480V 3 phase 7-10 seconds per cycle

Cuts with a 16" carbide tipped saw blade 240V/480V 3 phase 7-10 seconds per cycle

Hot Air Edgebander for Preglued banding 0.4 - 1.5 mm thickness Automatic cutoff for up to 1/32" Coil feed with manual feed for strips Panel thickness 10-50mm Front and rear end trim Top/bottom trim

Laguna Bandt 4 Edgebander Machine is 6 months old Extremely low hours - Buyer upgraded to a larger machine!

Front/rear trim Top/bottom trim Top/bottom bevel Moulding Edgesanding

POLYMAC LATO 38 EDGEBANDER0.5 MM to 8 MM (5/16") Cap. edgebanding thickness, min. panel width 85 mm (with 150 mm panel length) or 50 mm (with 250 mm panel length) & min. length 140 mm, max. panel thickness 45 mm.Equipped with: -- Automatic strip & coil feed magazine with 3 mm PVC Guillotine (6" pack cap. for strips). -- Compact size, underneath infeed magazine mounted Teflon coated hot melt glue pot; Dual digital thermostats; 1" dia. glue applicator roller. -- Pressure section with (1) large dia. "non-stick" coated drive roller and (2) Pneumatic pressure controlled idle rollers, horizontal adjustment w/ digital indicator.Workstations: -- End Trimming: Front & Rear end trims (0.5 HP - 12,000 RPM motors), motors travel on 45° slides and tilt 0° - 12° on horiz. plane. -- Flush Trimming: Top & Bottom rough flush trims (0.73 HP - 12,000 RPM motors), motors tilt 0° - 30°. -- Fine Trimming: Top & Bottom "fine/bevel/profile" multi-function trimming (0.73 HP - 12,000 RPM motors), motors tilt 0° - 30°, Cutters for 10° bevel and 3 mm PVC radius round, digital readouts for easy setup (both T & B trimmes w/Quick Change motors for easy tooling change). -- Radius Scraping (PVC): Top & bottom scrapers for 3 mm thick PVC banding, model "RBD-501" w/pneumatic pressure control for scraping knives, digitals for horiz. adjustments. -- Buffing Station: Top & bottom buffing model "SP-500" (0.5 HP - 3,000 RPM motors), units tilt 0° - 30°. -- Speed, Feed: Feed chain with "anti-slip" 80 mm wide rubber pads, self-lubrication chain pads, feed speed 33 FPM, 2-HP feed drive.Complete with: -- Microprocessor control w/LCD readout; Insulated sound enclosure overall trim stations; extendable side panel support rail; 4 KVA - 240 Hz digital frequency inverter. -- Includes a complete set of used tooling & operating & spare parts manuals.

PUTSCH EBP 950PMCR EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): Specifications: -- Edge material thickness 0.4 - 3 mm coil & up to 5 mm strips.Min./max. panel thickness "all units" 8 - 50 mm (0.39" - 1.97"). Max. material thickness when using CR unit is 1.77" (45 mm). Min. panel width: 95 mm (3.7") & 110 mm (4.3") min. length.Fixed feed speed of 9 MPM (29.5 FPM).Equipped with: -- Automatic coil feed magazine with an oscillatory cutting shear for uninterrupted edge feed. -- Gluing Unit: Teflon coated glue tank, approx. 10-minute heat-up time. -- Side Pressure Unit: 3-roll pressure unit w/1st roller power driven via clutch with pneumatic in & out positioning, (2) idler rollers.Workstations: -- Pre-Milling Unit: (2) 2.0 HP (1.5 kW) motors with (2) opposing 60 mm diamond cutters that are micro-adjustable to mill up to 2 mm from the panel edge for optimal, chip-free glue application. -- End Trimming Unit:(1) 0.3 HP (0.2 kW) - 12,000 RPM Motor, automatic single motor end trim unit with (2) 80 mm blades. -- Top & Bottom Trimming Unit: (2) 0.5 HP (0.37 kW) - 12,000 RPM ea. Motor with 75 mm cutters (with disposable knives) that offer a straight 2 mm radius / 15° bevel.The flush trim unit also includes 120 mm scratch-resistant vertical disc copiers that are ideal for delicate finishes. -- Corner Rounding Unit: NOTE: When using CR unit, the max. material thickness is 1.77" (45 mm) & min. panel length is 7.78" (200 mm).(1) 0.3 HP (0.2 kW) - 12,000 RPM Single motor Corner Rounding unit for leading & trailing edges. The corner rounding unit is fixed to the frame crossbeam on double linear guides and features 50 mm cutter blocks, as well as vertical/horizontal 50 mm diameter copiers for profiling straight, curved, and beveled edges. -- Edge Scraping Unit: Top & Bottom PVC Scraper for up to 3 mm radius, complete with 3 mm scrape shaving collection box. Programmable, pneumatic exclusion on/off. -- Buffing Unit:Top & bottom buffing unit (2 x 0.2 HP - 1,400 RPM motor each), tilting range 8°.Controller: "ETOUCH" Touch Screen Control for the "EBP 950" Series; the ETOUCH touch screen control is a 7-inch color programmable display.Operators can store up to (99) working programs and connect to an optional network to read statistical data, diagnostic messages and online updates.The Control permits the operator to engage or disable specific work operations, while also providing immediate access to diagnostic messages and statistical data such as hours of operation and length of coil used.Complete with:Track Drive Chain feed speed 9 MPM (29.5 FPM).(2) Rows of upper pressure wheels in holddown beam.Adjustable material support outrigger.Sound & Safety Hoods.Used Tooling -- Actual Model is PUTSCH EBP 950PMCR.

CASADEI (PUTSCH-BRANDED) EBP-980 Automatic Compact Edgebander, with Pre-Mill0.4 - 3 mm (1/8") Edge thickness cap., 10 mm (0.39") Wood strip cap., 8 - 40 mm (0.3" - 1.57") panel thickness, 60 mm (2.3") min. panel width and 140 mm (5-1/2") min. length. Feed Speed, fixed 11 m/Min (36 FPM). Top pressure bar with a double row of rubber rollers can be easily adjusted by means of a lever to accommodate the panel thickness' being processed.PLC CONTROL; -- Thermostatic glue control with automatic standby and temperature indicator. -- Light-up LED buttons to select machine operating units -- 7” color display -- Save up to 99 working programs. -- The encoder for panel feeding allows for complete automation of the various operating units. -- Diagnostics system with messages for machine use and maintenance. -- Statistical operating data: Total hours of machine use. Total and partial meters of edge usedEquipped with: -- Pre-Milling Unit, (2) motor, counter-rotating for the best possible glue joint. -- Gluing System, hot-melt, quick heat-up time and easy maintenance. -- Edge Magazine, automatic for strip & coil stock, 3 mm PVC guillotine,. ÷ Side Pressure Section, (1) driven plus 2-idle roller w/digital readout setting. Workstations: -- Pre-mill with diamond cutters. (2) 1 HP 12,000 RPM motors. Maximum milling adjustment of 2 mm with panel heights of 8-60 mm. (2) Diamond cutter blocks with counter rotation to obtain an invisible gluing line. Dedicated extraction system and blower for panel cleaning before gluing. -- End Trimming Unit, double motor end trim (2 x 0.5 HP - 12,000 RPM motors), chamfers 0° - 15°. -- Trimming Unit, top/bottom for flush/bevel/radius trimming motors (2 x 0.5 HP - 12,000 RPM) with insert knives. NOTE: Sold "As-Is" Without Warranty!

CASADEI (PUTSCH-BRANDED) EBP-420 Automatic Compact EdgebanderSpecifications: -- Edgebander can handle panel thicknesses of 8 mm to 45 mm (0.31" - 1.77"). -- Coil feed accepts Edgebanding from 0.4 mm to 2 mm (0.02" - 0.08") Thick, Strip material can be hand-fed. -- Min. part length 210 mm (8.27"), Min. part width 95 mm (3.74"). -- Feed speeds 3 - 7 MPM (10 - 22 FPM).Equipped with: -- Large capacity Teflon-coated glue pot, PLC Control has thermostatic glue control with Automatic stand-by & Temperature display. -- Feed chain pads with Replaceable rubberized surface inserts. -- Rubberized hold-down rollers with Ball bearings for low friction & long life.Workstations: -- Pneumatically operated guillotine with 2 mm (0.08") Max. banding thickness, Spring loaded pressure rollers. -- Single front/rear trimming unit with 0.3 HP Motor. -- Top & bottom trimming units with (2) 0.5 HP Motors. -- Top & bottom scraping station (Flush Trim Unit) with 120 mm Vertical Disc Copier.Complete with: -- Safety enclosure protects operator from noise and debris.NOTE: Sold "As-Is" Without Warranty!

CASADEI (PUTSCH-BRANDED) EBP-320 Automatic Compact EdgebanderSpecifications: -- 0.4 to 2 mm Edgebanding thickness. -- 1-1/2" Max. panel thickness.Equipped with: -- Teflon-coated glue pot with 15-minute heat-up time. -- 2 mm cap. Guillotine. -- 3-Roller Pressure section to ensure even & firm adhesion of edge tapeWorkstations: -- Front & rear end trim with Pneumatic guillotine. -- Top & bottom flush trims with (2) 0.8 HP - 12,000 RPM Motors, Straight or bevel cutters, 75 mm cutterheads with Knife inserts for 2 mm Radius or 15° Bevel. -- 16 FPM Feed speed with 0.8 HP Motor.Complete with: -- Sound enclosure, Outrigger panel support.NOTE: Can be converted to Single-Phase for an additional cost.NOTE: Sold "As-Is" Without Warranty!

CASADEI (PUTSCH-BRANDED) EBP-420 Automatic Compact EdgebanderSpecifications: -- Edgebander can handle panel thicknesses of 8 mm to 45 mm (0.31" - 1.77"). -- Coil feed accepts Edgebanding from 0.4 mm to 2 mm (0.02" - 0.08") Thick, Strip material can be hand-fed. -- Min. part length 210 mm (8.27"), Min. part width 95 mm (3.74"). -- Feed speeds 3 - 7 MPM (10 - 22 FPM)Equipped with: -- Large capacity Teflon-coated glue pot, PLC Control has thermostatic glue control with Automatic stand-by & Temperature display. -- Feed chain pads with Replaceable rubberized surface inserts. -- Rubberized hold-down rollers with Ball bearings for low friction & long life.Workstations: -- Pneumatically operated guillotine with 2 mm (0.08") Max. banding thickness, Spring loaded pressure rollers. -- Single front/rear trimming unit with 0.3 HP Motor. -- Top & bottom scraping station (Flush Trim Unit) with 120 mm Vertical Disc Copier.Complete with: -- Safety enclosure protects operator from noise and debris.NOTE: Sold "As-Is" Without Warranty!

CASADEI (PUTSCH-BRANDED) EBP-320 Automatic Compact EdgebanderMultiple Machines Available in 3-Phase or Single-PhaseSpecifications: -- 0.4 to 2 mm Edgebanding thickness. -- 1-1/2" Max. panel thickness.Equipped with: -- Teflon-coated glue pot with 15-minute heat-up time. -- 2 mm cap. Guillotine. -- 3-Roller Pressure section to ensure even & firm adhesion of edge tapeWorkstations: -- Front & rear end trim with Pneumatic guillotine. -- Top & bottom flush trims with (2) 0.8 HP - 12,000 RPM Motors, Straight or bevel cutters, 75 mm cutterheads with Knife inserts for 2 mm Radius or 15° Bevel. -- 16 FPM Feed speed with 0.8 HP Motor.Complete with: -- Sound enclosure, Outrigger panel support.

PUTSCH EBP-420 PM Automatic Compact EdgebanderSpecifications: -- Edgebander can handle panel thicknesses of 8 mm to 45 mm (0.31" - 1.77"). -- Coil feed accepts Edgebanding from 0.4 mm to 2 mm (0.02" - 0.08") Thick, Strip material can be hand-fed. -- Min. part length 210 mm (8.27"), Min. part width 95 mm (3.74"). -- Feed speeds 3 - 7 MPM (10 - 22 FPM)Equipped with: -- Large capacity Teflon-coated glue pot, PLC Control has thermostatic glue control with Automatic stand-by & Temperature display. -- Feed chain pads with Replaceable rubberized surface inserts. -- Rubberized hold-down rollers with Ball bearings for low friction & long life.Workstations: -- Pre-mill unit. -- Pneumatically operated guillotine with 2 mm (0.08") Max. banding thickness, Spring loaded pressure rollers. -- Single front/rear trimming unit with 0.3 HP Motor.Complete with: -- Safety enclosure protects operator from noise and debris.NOTE: Sold "As-Is" Without Warranty!

SAFETY SPEED MFG 60HA Hot Air Edgebander; Safety Speed Cut now offers a Hot Air Edgebander that is small in price yet big in ability.The NEW "60HA" features: -- Electronic variable speed control -- Digital Electronic temperature control -- Adjustable Heat nozzle that saves energy. -- Electromagnetic end-cutters; no compressed air needed -- Accutrim edge trim system uses industrial duty trim routers to ensure a quality finish. -- Dust collection outlet to keep the part machine and floors clean -- Automatic conveyor for consistent feed rate.....and yes it is "American Made"!

SAFETY SPEED 72GP EDGEBANDER -- Digital P.I.D. Temperature control Glue Pot that reduces overheating and burning of the glue. -- Standby temperature mode for small runs. -- Short 10 - 15 Min heat up time -- Digital Electronic temperature control. -- Adjustable Heat nozzle that saves energy. -- Electromagnetic guillotine end-trim means no compressed air needed. -- Accutrim edge trim system uses industrial duty trim routers to ensure a quality finish. -- Dust collection outlet to keep the part machine and floors clean. -- Automatic conveyor for consistent feed rate -- American Made.

SCM OLIMPIC K 201 HFA Automatic Compact Edgebander, with 3 mm Max. Coiled Edgebanding Thickness & High Frequency MotorsSpecifications: -- Edgebanding thickness cap. (for both coil & strip) 0.4 - 3 mm (0.02" - 0.19"). -- Min. panel length for coiled edges (Min. width 200 mm) 140 mm (5.51"). -- Min. panel width for coiled edges 65 mm (2.56"). -- Panel thickness 8 - 40 mm (0.31" - 1.57"). -- Feed speed 9 MPM (29 FPM).Equipped with: -- Automatic adjustment of all units when panel thickness is changed. -- 20" Dia. Coil table. -- Automatic coil feed magazine, Manual strip feed. -- Teflon-coated glue pot. -- 1.2 mm (0.05") Cap. guillotine. -- Eye-level control, with GEFRAN "1000" LED Temperature controller. -- Adjustable feet.Workstations: -- Single-motor end trimming unit, with (1) 0.19 kW (1/4 HP) 12,000 RPM High-frequency motor & Copying device. -- Top & bottom flush trimming unit, with (2) 0.35 kW (1/2 HP) 12,000 RPM High-frequency motors and Front & Vertical copying devices.

SCM K400 E --Specifications: -- Edge Capacity,0.4 to 6 mm (0.016to 1/4")for strip feeding. --Panel Capacity,min. width65 mmand 140 mm min. length, (2-3/8" and 5-1/2"). Panel thickness min./max. 8 - 60 mm (3/8" - 2-1/2"). --Equipped with: -- Automatic strip & coil feed magazine, Teflon coated glue pot (heat-up time 10 Min), -- 3 mm cap. guillotine, 3-roll pressure unit. -- Startouch control system with large 12" screen, graphic display with one touch, memory capacity up to 60 working programs. --Workstations: -- Double motor front & rear end trim "K-2" mounted on THK guides (0.4 HP - 12,000 RPM) , tilts 0° - 15°, rapid set up between straight and angled cutting with the automatic tilting device. -- Top & bottom flush & bevel trims "RI/800" (0.7 HP - 12.000 RPM), bevels 0° - 15° with precision digital indicators for quick setup. -- Top & bottom "RAS/V" scraping unit with container with filter for long chips; -- Top & bottom buffing unit (0.25 HP - 2,800 RPM ). -- 36 FPM Fixed feed speed, 0.75 HP feed drive.÷Complete with: --Full cover sound enclosure, mechanical digital readouts for setup adjustments, frequency inverter and outboard panel support. --Actual Model: "OLIMPIC K 400 E".