Woodworking Equipment For Sale

NEWMAN WHITNEY S-970 DOUBLE SIDED PLANER WITH "QUIET CUT" HEADS - Hard to find 44” width capacity with 7” thickness capacity - S970-44" SN: 17701 - Built: March 1965. Shipped to: Carolina Panel:Lexington NC - Retrofitted with the Helical cutterheads in April 1993 - Includes grinder (handle was bent in storage but can be easily repaired) and dust hood - One door cover has a crack but it does close without any issues - We purchased this in 2013 and never used it. Was in operation when purchased Call 800-459-2148 for more info.

Newman Yates A-20 4 Sided Planer

NEWMAN EPR-24 24" W x 6" Thick Electric Feed Double Roughing Planer, with "QUIETCUT" 10-Knife Helical Carbide Cutterheads & Knife GrinderSpecifications: -- Min. stock thickness 3/8". -- Min. stock length: 51", 48" when Butted. -- Feed speeds 60 - 250 FPM.Equipped with: -- 60 HP - 3,535 RPM Top head motor, 50 HP - 3,525 RPM Bottom head motor. -- 25-3/4"; W x 22"; L x 34"; H Infeed table. -- Anti-kickback fingers. -- (4) 14"; Dia. x 6"; W Top Flat profile pneumatic tire infeed rolls, with 15 HP - 1,740 RPM TEFC Motor. -- (4) 4"; Dia. Bottom gravity infeed rollers. -- (4) 16"; Dia. x 7"; W Top Flat profile pneumatic tire outfeed rolls, with 15 HP - 1,740 RPM TEFC Motor. -- (1) 12"; Dia. Bottom gravity infeed roller. -- Top pressure bar, with replaceable chrome-plated steel wear plate & Air-operated release. -- Top chipmaker, with Pneumatic raising, 3" W spring-loaded sections, Each section with replaceable steel wear toe plate & Independent wear adjustment. -- ACCURATE TECHNOLOGY "ProScale" Digital thickness indicator for Top head. -- Control console & Remote feeder pendant control.Complete with: -- Service Manual. -- Automatic Cut Control. -- "QUIETCUT" 6-1/2" Dia. 10-Knife Helical Carbide Cutterheads, with 7" Cutting circle. -- Knife Grinder. -- (4) Spare 16"; Dia. x 7"; W Top Flat Profile Pneumatic Tire Outfeed Rolls.Machine Dimensions: 120" x 106" x 70" H.Panel Box Dimensions: 32" x 20" x 84" H.Control Cabinet Dimensions: 62" x 14" x 75" H.Control Console 24" x 19" x 38" H.Feeder Control: 18" x 18" x 43" H.

Newman HP-688 Twin Bay Hydraulic Cold Press6-Sections (top platens) each 24" x 30" each, Center posts between third and fourth platens, creating two overall areas of 30" x 74". Specifications: -- Max. fixed opening 48" with 11" cylinder stroke, each platen section has (1) 10" bore with 5" dia. ram cylinder; -- Each platen is 15/16″ thick and it’s back structure is webbed every 5-1/2″ X 7-1/2″. -- Side-mounted self-contained hydraulic system w/tank, 10 HP continuous operating pressure compensating pump. -- Hand-Valves to Cycle Individual Platens with pressure gauges for each platen. -- Idle Pop-Up Bed Rollers in the bottom platen for easy loading and unloading.Over all the press is in excellent condition, is extremely heavily built, and is also a beautiful impressive press in person.

Specially designed haunching machine for beaded face frames, picture frames and decorative cabinetry. This machine uses a specially designed 2-piece carbide insert adjustable cutter. -- The work piece is placed on the table and against the fence and the cutter travels in a vertical motion to achieve the precision cut. -- Any size cut width is attainable by adjusting the width of the cutter and indexing from the fence stops. -- TECHNICAL SPECIFICATIONS -- Motors: 1 @ 1.1 KW (1.5 HP), Voltage: 220/440V/3/60hz, RPM: 6,000 RPM @ 60 hz, Air: 6 Bar, -- TOOLING: Insert Carbide: Milling head 140 mm (5.5"), Height min: no min., width 1/6" (4.2 mm). Max Profile: Height 3.5" (88.9 mm), width no max. -- Machine Dimensions: L x W x H - 40" x 30" x 35". Machine Weight: 675 lbs. -- AVAILABLE OPTIONS (Call for Pricing): Tooling carbide insert head, additional set of inserts, additional flip stops, foot pedal control, left & right digital fence.

Manufacturers Specifications Max Width of Material: 12 in 12-14” blade capacity Production Rate: 45-50 cuts per minute designed for 45 degree vertical cuts Work Tables: 60 inches to the right and left of the saw, Motors: (2) 2.5 HP (3,600 RPM). 220/60/3PH.

---Liquidation Item---Palletized & Ready to Ship with Free Loading! 5,000 CFM 15 HP Enclosureless Baghouse Dust Collector https://exfactoryauctions.com/Detail/DC-230843/event/L051624$1

NORTHFIELD - #4, ...Table SawSpecifications: -- 16" Dia. saw blade cap.; 7.5 HP - 3,450 RPM motor; 1" dia. arbor; 13/16" dado cap. with: Thin collar; blade tilts: 0° - 45°; 32" rip cap. with T-type fence.

Northfield #4 Table Saw - In great working condition - Size: 4 - Serial: 62354 B - Northfield Special Heavy-Duty Motor: - Type: Arbor - HP: 7.5 - RPM: 3450 - Phase: 3 - Cycles: 60 - Code: L - Frame: J58 - Enclosure: TEFC - Winding: R & M - Serial: MS92250LV - Temp Rise: 55°C - Volts: 220 / 440 - Full Load Amps: 21 / 10.5 - Size information: - 1390 lbs. - 44" L x 36" W x 44" H - Weight & measurements are not inclusive of pallet (not shipping info) Call 800-459-2148 for more info.

Rigid one piece welded steel frame, with 10 HP direct drive spindle motor at 7,800 RPM, 1-1/4" x 4-1/2" stackable multi-cutter spindle to mill stile, rail & raised panel profiles. -- Stackable cutter spindle with push button indexing to significantly reduce set-up time as each station is preset; the change from one cutter to another is achieved via a select switch for each operation. -- Complete with: X - Y Sliding table w/pneumatic holddown. -- 2-way linear movement for straight or arch top doors up to 50" long. -- 5" Dust collection hood, and cutter shield. -- Includes: (1) Cathedral arch templates, (1) complete set of tools.

NORTHTECH - SRS-12NS, ...Straight Line RipsawSpecifications: --15 HP Motor, 1" dia. saw arbor, speed of 4,500 RPM, 8". -- Max. blade cap.: 12". -- Max. depth of cut: 3-5/16". -- Part length: 8" Min. -- Distance between saw & column: 18"; 60" W x 33" table. -- Feed & Chain: 2 HP Feed drive motor; variable feed speeds of: 59 - 72 - 91 - 111 & 137 FPM. --7" Wide double chain, with automatic chain lubrication.Equipped with & Feature: -- Top pressure system with (6) spring loaded holddown rollers. -- Double row antikickback fingers. -- Adjustable infeed fence. -- Safety side guard. -- 4" Dia. dust hood outlet. -- Push button controls. -- Magnetic starters. - Overhead post for laser mounting.

NORTHTECH NT-SRS12 Straight Line Rip Saw: 15 HP - 4,500 RPM Direct drive overhead mounted arbor motor, 1" dia. arbor, 8" - 12" max. blade cap., 3-3/8" max. depth of cut, 8" min. part length. Specifications: -- 18" Distance between saw and column. -- 57" L x 39" W table, table height 31-1/2", floor space required 1,200 x 1,600 mm (48" x 63").. -- 2 HP Variable feed drive, (5) feed speed from 59 - 137 FPM. -- Chain drive with automatic chain lubrication; feed chain track travels on hardened V-way guides. -- Top pressure system with spring loaded holddown rollers, dual anti-kickback devices. Equipped with & Features: -- Micro-adjust rip fence -- Laser Guide Line Light -- Digital auto chain oiler -- Full coverage guards -- 4" Dia. dust hood outlet -- Push button controls, and magnetic starters

NORTHTECH NT-6108ES-6 Edge SanderSpecifications: Sanding Belt is powered by a 3 HP 230/460V motor. -- The platen measures 6-3/4″ X 39″ and has NEW graphite. Rubber covered direct drive pulley. -- Equipped with: (1) 7-3/4" x 37" Adjustable side table and (1) 11-1/2" x 19" Adjustable end table; both side & end tables have vertical table travel w/hand wheel adjustment. Complete with: -- Magnetic controls with overload protection & dust hood with 4" dia. outlet.

Northtech Chop Saw

NORTHTECH NT-610EL Top & Bottom Planer:24" Wide x 7.5" thick capacity; 1/4" minimum thickness; 12" minimum stock length.Specifications: -- Cutterheads: 25 HP top head; 20 HP bottom head; 5,800 RPM on cutterheads; (6) row spiral insert cutterheads, Carbide knives 15 mm x 15 mm x 2.5 mm 4-sided -- Feed works: 3 HP variable speed feed with speeds from 20 to 75 FPM; 1 HP motorized raise and lower of bed; DP-525 digital thickness controller; Overhead carpet style feed system Equipped with & Features -- Sectional chip breaker; Hard chrome plated bed; Automatic lubrication for feed system; Amp load meter -- Dust Requirements: 3,800 CFM; (1)10" and (1) 7" dust outlet Seller states this machine has less than 600 Hours of use.

Northtech NT 16R-10 Tilting Arbor Table Saw Infeed Roller 10 HP Motor

Northtech MRS-12N Gang Rip 50 HP Motor Needs a new safety with on the door

6” x 24” capacity 2 sided knives on helical cutter head 534 hours in meter

NorthTech 18" Pop-Up Saw. 10hp Motor. #00872

6” width capacity 8” thickness capacity 30 hp main motor, 1.4 hp feed motor 3 hp blower motor…460 volt 3 phase 559 rpm blade speed digital oiling