Woodworking Equipment For Sale

DELTA 11-990C 12" 5-Speed Bench-Top Drill PressSpecifications: -- Table size 8-1/2" x 8-1/2" with 15-1/2"; x 40"; x 11/16"; Thick Plywood top, Table tilt 40° Left/Right. -- Base size 8-1/4" x 8-1/4". -- Quill travel 2-3/8", Chuck capacity 1/2", JT33 Spindle taper. -- Spindle speeds 620, 1,100, 1,720, 2,340, & 3,100 RPM.Equipped with: -- 1/3 HP - 1,720 RPM Motor.Complete with: -- Portable Wood Cabinet.Dimensions with cabinet: 41" x 36" x 57" H

Delta Radial Arm Saw

DELTA/INVICTA RT 40 TABLE SAW14" Blade dia., 7.5 HP motor belt drives arbor at 3,500 RPM, 1" dia. right hand tilting arbor 0° - 45³; 4-1/2" max. depth @ 90°, 54" rip capacity to the right of blade.Front edge of saw to front of blade 16-1/2"; 59" x 43-5/16" precision ground cast iron table w/miter slots on either side of the blade, 33-1/2" table height.Equipped with: 54" BIESMEYER Fence system ($500 value); "Cam-lock" Fence system, and magnetic push button starter

Delta Table Saw 5 HP 230 volt 3-phase

Manufacturer’s Specfication - Motor: - Horsepower: 3 HP - Voltage: 230V - Hertz: 60 Hz TEFC - Phase: 1-Phase - Feed Motor: - Horsepower: 1/6 HP - Phase: 1-Phase - Speeds: 1,550 RPM Drums; 3 to 20 FPM Feed Belt - Sanding Capacity: 12-1/4 in. x 25-1/2 in. - Minimum Sanding Thickness: 1/4 in. - Minimum Length of Unbutted Stock: 6 in. - Drums: 5 in. x 26 in. Aluminum - Sanding Strip Size: 5-1/8 in. x 92-1/2 in. - Dimensions (Assembled): 31 in. x 46 in. x 53 in. - Base Dimension for Mobile Base: 17-3/4 in. x 43 in. - Weight: 418 lbs.

DELTA - 22-650, ...Single Planer.DELTA/INVICTA 12" TABLE TOP (no stand) Single Planer equipped with: 2 HP motor; 3-knife round cutterhead; with rollers.Capacity of 12"; feed rate of 15-1/2 FPM.250 LBS

DELTA - RC-63D, ...Planer w/10 HP MotorVery Nice INVICTA - RC-63D - 24″ Single Head Planer -- Mfg.: 11/1997; Model 22610; serial no. 1302. -- 24-3/4″ Width; 10 HP - 230 Volts, 3-phase motor. -- Solid serrated infeed roller; urethane outfeed roller. -- (2) Feed speeds. -- Adjustable bed rollers. -- Power table up & down with handwheel fine adjustment. -- 4-Knife cutterhead with: ESTA "Dispozablade" quick change Knife System. -- 6" Dust Port. -- Weight approx. 1,650 Lbs - Dims: 43'' L x 38" W' x 43" H

DEPENDABLE - 203, ...Cold Press40" x 102" Cap., side loading on 102" sideSpecifications: &#9679 (3) Split upper platens: 34" wide x 40" deep; split platens can be interlocked for single platen operation. &#9679 45" Max. daylight opening with 12" down stroke hydraulic cylinders. &#9679 (6) Rows of pop-up rollers in machine bed for loading & unloading. &#9679 (3) 7-3/4" Dia. hydraulic press cylinders from the top; (1) per platen. &#9679 Hydraulic power pack with 10 HP motor mounted on floor at end of Press.

DETEL M-2H DOUBLE ROW LINE BORER.(2) Line boring heads of (25) spindles each on 32 mm centers, drills from the bottom up.Equipped with: -- (2) 2 HP motors drive spindles at 3,400 RPM. Hand crank adjusts the opening between heads from 5" - 25" w/mechanical digital readouts, drilling depth up to 2-1/2" -- Dust Collection on each head. -- Hardened steel gears that are pressed onto the spindle shafts, 120" back fence with (4) large flip-stops. -- (2) Pneumatic index pins with independent switches for sequence boring on long side panels. -- (2) Overhead pneumatic hold-downs. -- Complete with standard screw-in 10 mm collets; air/electrical controls, pneumatic oiler, and foot pedal actuator for clamping & boring cycle.

Detel M-2H Boring Machine (2) 25-Spindle Boring Heads

DETEL M-2H Line Boring Machine.(2) Line boring heads with (25) spindles each on 32 mm centers, drills from bottom up.Equipped with: -- (2) 2 HP motors drive spindles at 3,400 RPM. Hand crank adjusts the opening between heads from 5" - 25" w/mechanical digital readouts, drilling depth up to 2-1/2". -- Dust Collection on each head. -- Hardened steel gears that are pressed onto the spindle shafts. -- 120" Back fence with (4) large flip-stops. -- (2) Pneumatic index pins with independent switches for sequence boring on long side panels. -- (2) Overhead pneumatic hold-downs. Complete with: -- Standard screw-in 10 mm collets; air/electrical controls, pneumatic oiler, and foot pedal actuator for clamping & boring cycle.

DEWALT GA 16" Radial Arm Saw Specifications: -- 5 HP TEFC Saw motor; 16" dia. blade; 1" x 3-1/8" saw arbor; 4" thickness cap. @ 90°, 19" crosscut cap., cutting 1" board with long arm. -- Complete with: -- Blade guard, magnetic starter, stand, carriage return mechanism. -- Optional: -- Electric brake. -- Photo not of actual machine.

DEWALT - 35 Series Super Duty, ...22" Radial Arm SawSpecifications: -- 7.5 HP TEFC Saw motor; 22" dia. blade; 52" long arm; 1" x 3-1/8" saw arbor; 7" thickness cap. @ 90°; 26" crosscut cap.; 40" rip cap. -- Complete with: -- Blade guard, magnetic starter, stand, and carriage return mechanism. -- Optional: Electric brake.

DEWALT - GE, ...Radial Arm Saw Specifications: -- 5 HP TEFC Saw motor; 16" dia. blade; 1" x 3-1/8" saw arbor; 4" thickness cap. @ 90°; 19" crosscut cap.; cutting 1" board with long arm. -- Complete with: -- Includes: Blade guard, magnetic starter, metal stand, and table clamps. -- Specifications subject to verification.

DEWALT 10" Radial Arm Saw. -- Specifications: -- Blade diameter: 10"; Table size: 27" x 30" x 36" H.

DEWALT GE 20" Radial Arm Saw Specifications: -- 7.5 HP TEFC Saw motor; 20" dia. blade; 1" x 3-1/8" saw arbor; -- 6" Thickness cap. @ 90°, 27" max. crosscut cap. cutting 2" board; 42" rip cap. with 52" long arm; 2" dado capacity. Complete with: -- Blade guard, magnetic starter, stand, carriage return mechanism. Includes: -- (1) New 20" blade.Optional: -- VFD Electric brake.Note: Photos are not of actual machines, but they represent the state of "Reconditioning"

DEWALT - GA (563A), ...Radial Arm Saw -- 14" Blade cap.; 1" arbor; 3 HP - 3,425 RPM motor; 16" cutoff cap.; 4" depth of cut. -- 20" x 50" Table; hand crank raise & lower. - Complete with: Blade guard; 4" dia. dust outlet, and starter.

Several Dewalt Radial Arm Saws

Dewalt Radial Arm Saw

DIEHL - SL-52, ...Straight Line Rip SawSpecifications: -- 15 HP Motor, 3,600 RPM belt driven, fixed 2" arbor. -- 14" to 18" Blade diameter. -- 4-1/4" Max. thickness with 18" blade diameter. -- 2 HP - 1,800 RPM feed drive, variable feed speed from 65 to 190 FPM. -- 25" Throat depth to right of blade, 24" of table to left of blade. --Table size: 61" x 80".Equipped with & Features: -- Cast iron pressure bar arms with ball bearing rollers. -- Adjustable rip fence. -- Self-adjusting antikickback fingers with control cam. -- Automatic lubrication of feed chain & race. -- Full overload and under voltage protection. -- Manual arbor brake for safety with interlock.Shipping Dimensions 7-1/2' L x 7' W x 5-1/2' H; weight of 5,000 Lbs.