Morbark Mobile Wood Chippers For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 2
40 Results Found
Sort By 
Recently Added Items
1998 Morbark 22rxl
$66,000
1998 Morbark 22rxl
2015 Morbark 23NCL
$225,000
2015 Morbark 23NCL
2017 Bandit 3090T
$400,000
2017 Bandit 3090T
2019 Morbark 40/36
$350,000
2019 Morbark 40/36
STANDARD LISTINGS
$ 28,000

2016 Morbark Beever M12D 1,237 Hours Auto Feed 89hp Power Solutions International (PSI) 3.0L gas motor TorqMax Feed Wheel Compression System Hydraulic Lift Yoke Cylinder 53" Folding Feed Table 18" x 12" Throat Capacity Fully serviced with new fluids, filters, tires, wheels, knives, battery and rain cap 360 Degree Rotating Adjustable Chute LED lights

Mitch Stevens
828-773-6986
Call

$ 79,000

MORBARK 27RXL WHOLE TREE CHIPPER BAD MOTOR V-12 CAT LOTS OF NEW PARTS DISC SHAFT BEARINGS DECK CHAIN AND SPROCKETS JUST WENT THRU CHIPPER AND MOTOR THREW A ROD LOTS OF NEW PARTS JUST NEEDS MOTOR

 Manton, MI
Lutke Equipment LLC
231-824-9505
Call

$ 139,000

2002 MORBARK 30RXL WHOLE TREE CHIPPER ENCLOSED CAB WITH HEAT AND AIR CAT V-12 MORLIFT 1000 BOOM READY TO GO

 Manton, MI
Lutke Equipment LLC
231-824-9505
Call

$ 65,500

2008 MORBARK TYPHOON 20 CHIPPER -400 horsepower John Deere(rebuilt within the last five hundred hours) -new injectors and new injection pump new fuel pump -new head -new belts -hydraulic pumps -replaced all hydraulic valves -new brakes -all new fluids and filters -new paint chipper has remote control to that works -recently put on 12000 pound winch on back

Keith Comeau
704-929-9122
Call

$ 47,900

1992 Morbark Model 27 Whole Tree Chipper Cat V12 800 HP Engine Currently in production PRICE REDUCED

Mitch Stevens
828-773-6986
Call

Call for Price

1996 Morbark Model 20 Whole Tree Chipper ,Caterpillar 425 HP Engine, Enclosed Cab with Heat and AC, Needs a Condenser for the AC, Machine has Separator ,Ready for the Woods... Overall Length 21’6” Overall Width 8’0” Overall Height 13’6” Weight 10,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Albany, NY
NEF Equipment
855-251-2648
Call

Call for Price

1994 Morbark 23 WCL Whole Tree Chipper Engine is a 3412, Seperator, Enclosed Fold Down Cab with Heat, 6 Sets of Knives and New Anvil, Ready for the Woods Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Albany, NY
NEF Equipment
855-251-2648
Call

$ 76,900

1993 MORBARK 30/36 TREE CHIPPER HOURS ARE UN-KNOWN 325 CAT ENGINE REPLACE IN 2009 NEW BRAKES AND TIRES ALL HOSES REPLACED RECENTLY VALVE BANKS REBUILT ON BOARD AIR COMPRESSOR NEW BELTS AND CHAINS REW RADIATOR JOYSTICK CONTROL WORKS DAILY FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

 Dover, NH
Granite Heavy Equipment and Finance
603-953-5983
Call

$ 114,900

2007 Morbark Typhoon 20 Whole Tree Chipper, Equipped with Loader and Operator Platform, John Deere 325 HP Turbo Diesel Engine, New Completely Rebuilt Engine with 20 Hours, 6,000 Frame Hours, Hydraulic Tongue Jack , Autofeed System, No Winch . Great Running Machine... HEIGHT 11' WIDTH 8' LENGTH 26'8" GROSS WEIGHT 18,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Sacramento, CA
NEF Equipment
855-251-2648
Call

Call for Price

2006 Morbark Hurricane 18 with 4,942 hours. 18" chipping capacity, Caterpillar 213 pre emission diesel, 1,593 hours on newer motor. Machine has full hydraulics- 360' rotation chute, (3) jacks and 5000 LB winch. New: blades , blade bolts , blade pockets, cutter bar, drum bearings, blade belts , feeder wheel chain, 150' winch line with dog bone, batteries, leaf springs, fluids, filters, paint, waiting on sticker kit from Morbark. Ready for work. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Blakeslee, PA
NEF Equipment
855-251-2648
Call

$ 195,000

2005 Morbark Inc model 23 chipper with mor-lift 500 grapple, Caterpillar 3412 engine, 3195 hours before clock was changed and now showing 121 Hours on the clock. Computer showed 3320 at service last week, Set up for 7/8 inch chip size, Tilt cab, Hydraulic moving/folding chip chute, All the hydraulic functions are working, A/C/heat unit in cab was not functioning when checked, On board mounted air compressor, It’s a good solid machine ready to work, Contact us to set up a time to see it!

 South Boston, VA
Mast Enterprises Equipment LLC
434-446-2401
Call

$ 250,000

1050 HP C27 engine, Morlift 500, 3 flail with bark conveyor. Boom cylinder being repacked, one owner, original engine

Forestry First
855-588-7871 ext:1
Call

$ 149,900

2011 Morbark M20R Track Chipper with2,690 Original Hours, 20" Capacity Self-Feeding Drum Style Chipper is Powered by a Pre-Emission 350HP Tier 3 C9 Caterpillar Turbo Diesel Engine with a Flexaire Reversing Fan System. Caterpillar 312 Steel Track Undercarriage, Wireless Remote Control. 32" Wide Supersize Feed Roller System with a Live Feed Chain Table, Hydraulic Lift / Crushing Cylinder, Height Adjustable Discharge, and Hydraulic turn. Length 22'9" 6.93 m Height 11'5" 3.48 m Width 8'6" 2.59 m Gross Weight (approximate) 26,540 lb 12,040 kg

 Albany, NY
NEF Equipment
855-251-2648
Call

Call for Price

Morbark 30-36 Portable Chipper 350HP Cummins Approx 4000 Hrs self Feeding Grapple Up to 18" Dia Material

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 225,000

2015 Morbark 30/36 NCL Cat 540hp with 5000hrs, A-3 Drum, Radio Remote, Pintal Hitch, 4 Hydraulic Stablizers, Infeed Chain, Woods Ready… Gross Weight 51,500 lb Length 29'5.25" Height 11'6" Width 8'6" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Burlington, VT
NEF Equipment
855-251-2648
Call

$ 42,900

1977 MORBARK 22 TREE CHIPPER RECENT CUMMINS ENGINE RECENT CLUTCH SLIDE BOOM LOTS OF RECENT PARTS GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN GRANITEHE.COM

 Dover, NH
Granite Heavy Equipment and Finance
603-953-5983
Call

$ 74,900

1992 MORBARK 30RXL WHOLE TREE CHIPPER ENGINE 3412 860HP STARTS AND RUNS GOOD 3 KNIFE, GOOD PADDLES, GOOD FACE PLATE, FEED DECK CHAIN NEED WORK CHIPPER IS WORKING EVERYDAY FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

 Dover, NH
Granite Heavy Equipment and Finance
603-953-5983
Call

$ 129,000

2019 Morbark 1821 Tracked Chipper, Cat 173HP Diesel, Winch, Remote. Excellent Running Machine.

 Constantia, NY
Kleis Equipment LLC
315-623-2111
Call

$ 60,000

2021 Morbark 1821 Tow Behind Chipper, Gas, Hydraulic Winch. Nice Low Hour Chipper.

 Constantia, NY
Kleis Equipment LLC
315-623-2111
Call

$ 72,900

MORBARK MODEL 20 TRACK CHIPPER 5,888 HOURS CATERPILLAR 425 ENGINE RECENT ENGINE REBUILD RECENT CLUTCH PLATE RECENT BEARINGS GOOD UNDERCARRIAGE GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

 Dover, NH
Granite Heavy Equipment and Finance
603-953-5983
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved