Planers For Sale
Category
Planers
160 Results Found
Call for Price
Call for Price
$ 6,000
Call for Price
MLS Number 11570232 Whitney S970 Wood Planer A. 30 inch width by 7 inch thickness capacity B. 40 HP 3600 RPM top head motor , 3 phase ( Approx 50 amps on 480 volts ) C. 30 HP 3600 RPM bottom head motor, 3 phase ( Approx. 40 amps on 480 volts ) D. 5 HP feed motor ( Approx. 7.5 amps on 480 volts ) E. 50 to 150 FPM feed speeds F. ¾ HP raise-lower motor G. Newman 6 row Quite-cut carbide knife ( 5 inch cutting circle ) cutter-heads H. Knife grinder and jointing device I. Dust hoods J. Cleaned and checked K. Repaired Frame L. Serial No. 17977 ( Orig. Mfg. Approx. 1971 ) M. Electrical controls in separate cabinet
Call for Price
MLS Number 11570230 Whitney S970 Wood Planer A. 30 inch width by 7 inch thickness capacity B. 40 HP 3600 RPM top head motor , 3 phase ( Approx 50 amps on 480 volts ) C. 30 HP 3600 RPM bottom head motor, 3 phase ( Approx. 40 amps on 480 volts ) D. 5 HP feed motor ( Approx. 7.5 amps on 480 volts ) E. 50 to 150 FPM feed speeds F. ¾ HP raise-lower motor G. Newman 4 row Quite-cut carbide knife ( 5 inch cutting circle ) cutter-heads H. Knife grinder and jointing device I. Dust hoods J. Cleaned and checked K. Repaired Frame L. Serial No. 18343 ( Orig. Mfg. Approx. 1975 )
$ 40,000
MLS Number 11180323 Whitney Model 97 Planer 36 inch width capacity by 7 inch thickness 40 HP 3600 rpm top head motor 30 HP 3600 rpm bottom head motor 5 HP feed motor -variable speed 6 row Newman Quite-cut carbide knife heads 432 new carbide knives installed and ground 8 roll feed set-up Knife grinder and jointer Top head dust hood 480 volt, 3 phase electrical Serial no. 15819 Cleaned and checked
Call for Price
$ 25,000
WOODS Planer-Matcher - Model 412 motorized, heavy duty planer-matcher with 6 heads. Ideal machine for surfacing dimension lumber or specialty products such as siding and flooring. 6" x 14" capacity, 8 knife heads; 50 hp top, 25 hp bottom, 20 hp sides; 20 hp bottom profile, 15 hp top profile. Item 32203.
$ 93,000
YATES AMERICAN A95 Planer Matcher - 20 knife machine. Features fabricated frame with 100 HP top head, 75 HP bottom head, setworks for top head and left side head, hydraulic powered feed rolls, removable heads on all spindles, dynamic press roll tensioning, PLC control, chromed and water cooled beds, electronic cutter head brakes, high capacity hydraulic pump unit, operators console, side head setup stand, spare top and bottom heads, motor control center.
$ 14,500
Yates A20 Planer Matcher, Serial #B44250 6”x15” in good condition, belt drive, no power, including top and bottom joiners, Tapered side heads with straight knives, hoods, good belts, transmission and chrome bed plate. Front side head needs bearings. Includes Newman HD pineapple feed table, Serial # 9210, stand alone controls.
Call for Price
Yates A20-12 Planer Infeed Deck Tilt Hoist 575 V Includes: Misc parts, heads and attachments for S4S and T&G. This system was removed from service this Spring. It is ready to load.
Call for Price
Call for Price
$ 45,000
Yates-American A-20 planer. 4 sided with profile machine, 10" rolls. Includes 10 cylinder Detroit engine, belt drive assembly.
Call for Price
Call for Price
Used Yates American Model B-26, 24” Double Planer, 75HP top, 40HPBottom, top and bottom 10 knife cutterheads, on the fly top and bottom jointers, 3 phase 480volt electrics, slide out lower cutterhead, top fixed cutterhead, 3-3/4” thickness capacity, approx. 20HP hydraulic feed works, power bed raise and lower, sectional pneumatic chip breaker, top infeed/outfeed rubber rollers.
Call for Price
Great Condition Sprockets and Gears Like New Top and Bottom Heads 6 Knife 2 Side Heads Motorized Top and Bottom Profiler
$ 44,700
YATES AMERICAN B-26 Top & Bottom Rough Lumber Planer24" x 4" Opening cap., 3/4" to 4" thickness capacity; 46" minimum unbutted length capacity;Specifications: -- (1) 75 HP DMD motor power hoisted top head, (1) 40 HP DMD motor bottom head, 8" dia. cutting circle at 3,450 RPM. -- 40 HP Hydraulic power unit for variable feed rate from 75 to 400 FPM, 12" dia. Urethane tire top feed rolls, 12" dia. non-powered lower rolls. Equipped with: -- Carbide spiral cutterheads, automatic pressure bar release (hydraulically operated), hydraulic top & bottom headlocks, anti-lap bar device, air tensioned & released chipbreaker. -- Complete with: Built-in top & bottom jointers, dust hoods, electrically interlocked safety guards, and small remote operator's console.
Call for Price
$ 3,900
18" x 8" Cap., 7.5 HP - 3,600 RPM direct drive motor, 4-knife 4-1/4" dia. cutterhead; 1/8" min. material thickness, 11" min. unbutted stock length, 3-1/4" min. butted stock length. -- 24" x 40" Cast iron table bed, manual raise-and-lower on (2) 1-1/4" dia. hoist screws; belt drive feed system, variable speed 25 - 70 FPM; (2) 4" dia. powered upper rollers with a sectional top in feed roll, (2) 4" dia. bed rollers, and sectional chipbreaker. -- Includes: Magnetic starter controls, pressure bar & shaving hood. --Smooth running Heavy duty machine.