Putsch Edgebanders For Sale

PUTSCH EBP 950PMCR EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): Specifications: -- Edge material thickness 0.4 - 3 mm coil & up to 5 mm strips.Min./max. panel thickness "all units" 8 - 50 mm (0.39" - 1.97"). Max. material thickness when using CR unit is 1.77" (45 mm). Min. panel width: 95 mm (3.7") & 110 mm (4.3") min. length.Fixed feed speed of 9 MPM (29.5 FPM).Equipped with: -- Automatic coil feed magazine with an oscillatory cutting shear for uninterrupted edge feed. -- Gluing Unit: Teflon coated glue tank, approx. 10-minute heat-up time. -- Side Pressure Unit: 3-roll pressure unit w/1st roller power driven via clutch with pneumatic in & out positioning, (2) idler rollers.Workstations: -- Pre-Milling Unit: (2) 2.0 HP (1.5 kW) motors with (2) opposing 60 mm diamond cutters that are micro-adjustable to mill up to 2 mm from the panel edge for optimal, chip-free glue application. -- End Trimming Unit:(1) 0.3 HP (0.2 kW) - 12,000 RPM Motor, automatic single motor end trim unit with (2) 80 mm blades. -- Top & Bottom Trimming Unit: (2) 0.5 HP (0.37 kW) - 12,000 RPM ea. Motor with 75 mm cutters (with disposable knives) that offer a straight 2 mm radius / 15° bevel.The flush trim unit also includes 120 mm scratch-resistant vertical disc copiers that are ideal for delicate finishes. -- Corner Rounding Unit: NOTE: When using CR unit, the max. material thickness is 1.77" (45 mm) & min. panel length is 7.78" (200 mm).(1) 0.3 HP (0.2 kW) - 12,000 RPM Single motor Corner Rounding unit for leading & trailing edges. The corner rounding unit is fixed to the frame crossbeam on double linear guides and features 50 mm cutter blocks, as well as vertical/horizontal 50 mm diameter copiers for profiling straight, curved, and beveled edges. -- Edge Scraping Unit: Top & Bottom PVC Scraper for up to 3 mm radius, complete with 3 mm scrape shaving collection box. Programmable, pneumatic exclusion on/off. -- Buffing Unit:Top & bottom buffing unit (2 x 0.2 HP - 1,400 RPM motor each), tilting range 8°.Controller: "ETOUCH" Touch Screen Control for the "EBP 950" Series; the ETOUCH touch screen control is a 7-inch color programmable display.Operators can store up to (99) working programs and connect to an optional network to read statistical data, diagnostic messages and online updates.The Control permits the operator to engage or disable specific work operations, while also providing immediate access to diagnostic messages and statistical data such as hours of operation and length of coil used.Complete with:Track Drive Chain feed speed 9 MPM (29.5 FPM).(2) Rows of upper pressure wheels in holddown beam.Adjustable material support outrigger.Sound & Safety Hoods.Used Tooling -- Actual Model is PUTSCH EBP 950PMCR.

CASADEI (PUTSCH-BRANDED) EBP-320 Automatic Compact EdgebanderSpecifications: -- 0.4 to 2 mm Edgebanding thickness. -- 1-1/2" Max. panel thickness.Equipped with: -- Teflon-coated glue pot with 15-minute heat-up time. -- 2 mm cap. Guillotine. -- 3-Roller Pressure section to ensure even & firm adhesion of edge tapeWorkstations: -- Front & rear end trim with Pneumatic guillotine. -- Top & bottom flush trims with (2) 0.8 HP - 12,000 RPM Motors, Straight or bevel cutters, 75 mm cutterheads with Knife inserts for 2 mm Radius or 15° Bevel. -- 16 FPM Feed speed with 0.8 HP Motor.Complete with: -- Sound enclosure, Outrigger panel support.NOTE: Can be converted to Single-Phase for an additional cost.NOTE: Sold "As-Is" Without Warranty!

CASADEI (PUTSCH-BRANDED) EBP-420 Automatic Compact EdgebanderSpecifications: -- Edgebander can handle panel thicknesses of 8 mm to 45 mm (0.31" - 1.77"). -- Coil feed accepts Edgebanding from 0.4 mm to 2 mm (0.02" - 0.08") Thick, Strip material can be hand-fed. -- Min. part length 210 mm (8.27"), Min. part width 95 mm (3.74"). -- Feed speeds 3 - 7 MPM (10 - 22 FPM)Equipped with: -- Large capacity Teflon-coated glue pot, PLC Control has thermostatic glue control with Automatic stand-by & Temperature display. -- Feed chain pads with Replaceable rubberized surface inserts. -- Rubberized hold-down rollers with Ball bearings for low friction & long life.Workstations: -- Pneumatically operated guillotine with 2 mm (0.08") Max. banding thickness, Spring loaded pressure rollers. -- Single front/rear trimming unit with 0.3 HP Motor. -- Top & bottom scraping station (Flush Trim Unit) with 120 mm Vertical Disc Copier.Complete with: -- Safety enclosure protects operator from noise and debris.NOTE: Sold "As-Is" Without Warranty!

CASADEI (PUTSCH-BRANDED) EBP-420 Automatic Compact EdgebanderSpecifications: -- Edgebander can handle panel thicknesses of 8 mm to 45 mm (0.31" - 1.77"). -- Coil feed accepts Edgebanding from 0.4 mm to 2 mm (0.02" - 0.08") Thick, Strip material can be hand-fed. -- Min. part length 210 mm (8.27"), Min. part width 95 mm (3.74"). -- Feed speeds 3 - 7 MPM (10 - 22 FPM).Equipped with: -- Large capacity Teflon-coated glue pot, PLC Control has thermostatic glue control with Automatic stand-by & Temperature display. -- Feed chain pads with Replaceable rubberized surface inserts. -- Rubberized hold-down rollers with Ball bearings for low friction & long life.Workstations: -- Pneumatically operated guillotine with 2 mm (0.08") Max. banding thickness, Spring loaded pressure rollers. -- Single front/rear trimming unit with 0.3 HP Motor. -- Top & bottom trimming units with (2) 0.5 HP Motors. -- Top & bottom scraping station (Flush Trim Unit) with 120 mm Vertical Disc Copier.Complete with: -- Safety enclosure protects operator from noise and debris.NOTE: Sold "As-Is" Without Warranty!

CASADEI (PUTSCH-BRANDED) EBP-980 Automatic Contour Edgebander, with Pre-Mill0.4 - 3 mm (1/8") Edge thickness cap., 10 mm (0.39") Wood strip cap., 8 - 40 mm (0.3" - 1.57") panel thickness, 60 mm (2.3") min. panel width and 140 mm (5-1/2") min. length. Feed Speed, fixed 11 m/Min (36 FPM). Top pressure bar with a double row of rubber rollers can be easily adjusted by means of a lever to accommodate the panel thickness' being processed.PLC CONTROL; -- Thermostatic glue control with automatic standby and temperature indicator. -- Light-up LED buttons to select machine operating units -- 7” color display -- Save up to 99 working programs. -- The encoder for panel feeding allows for complete automation of the various operating units. -- Diagnostics system with messages for machine use and maintenance. -- Statistical operating data: Total hours of machine use. Total and partial meters of edge usedEquipped with: -- Pre-Milling Unit, (2) motor, counter-rotating for the best possible glue joint. -- Gluing System, hot-melt, quick heat-up time and easy maintenance. -- Edge Magazine, automatic for strip & coil stock, 3 mm PVC guillotine,. ÷ Side Pressure Section, (1) driven plus 2-idle roller w/digital readout setting. Workstations: -- Pre-mill with diamond cutters. (2) 1 HP 12,000 RPM motors. Maximum milling adjustment of 2 mm with panel heights of 8-60 mm. (2) Diamond cutter blocks with counter rotation to obtain an invisible gluing line. Dedicated extraction system and blower for panel cleaning before gluing. -- End Trimming Unit, double motor end trim (2 x 0.5 HP - 12,000 RPM motors), chamfers 0° - 15°. -- Trimming Unit, top/bottom for flush/bevel/radius trimming motors (2 x 0.5 HP - 12,000 RPM) with insert knives. NOTE: Sold "As-Is" Without Warranty!

CASADEI (PUTSCH-BRANDED) EBP-320 Automatic Compact EdgebanderMultiple Machines Available in 3-Phase or Single-PhaseSpecifications: -- 0.4 to 2 mm Edgebanding thickness. -- 1-1/2" Max. panel thickness.Equipped with: -- Teflon-coated glue pot with 15-minute heat-up time. -- 2 mm cap. Guillotine. -- 3-Roller Pressure section to ensure even & firm adhesion of edge tapeWorkstations: -- Front & rear end trim with Pneumatic guillotine. -- Top & bottom flush trims with (2) 0.8 HP - 12,000 RPM Motors, Straight or bevel cutters, 75 mm cutterheads with Knife inserts for 2 mm Radius or 15° Bevel. -- 16 FPM Feed speed with 0.8 HP Motor.Complete with: -- Sound enclosure, Outrigger panel support.

PUTSCH EBP-420 PM Automatic Compact EdgebanderSpecifications: -- Edgebander can handle panel thicknesses of 8 mm to 45 mm (0.31" - 1.77"). -- Coil feed accepts Edgebanding from 0.4 mm to 2 mm (0.02" - 0.08") Thick, Strip material can be hand-fed. -- Min. part length 210 mm (8.27"), Min. part width 95 mm (3.74"). -- Feed speeds 3 - 7 MPM (10 - 22 FPM)Equipped with: -- Large capacity Teflon-coated glue pot, PLC Control has thermostatic glue control with Automatic stand-by & Temperature display. -- Feed chain pads with Replaceable rubberized surface inserts. -- Rubberized hold-down rollers with Ball bearings for low friction & long life.Workstations: -- Pre-mill unit. -- Pneumatically operated guillotine with 2 mm (0.08") Max. banding thickness, Spring loaded pressure rollers. -- Single front/rear trimming unit with 0.3 HP Motor.Complete with: -- Safety enclosure protects operator from noise and debris.NOTE: Sold "As-Is" Without Warranty!