Equipment For Sale

NEW Airoflex Portable Trailer Tipper The tipper has a 10’ x 45’ platform, 45-ton lifting capacity, 63° tilt, and a 3 minute up-cycle time. Engineered with a rugged design for simple off-highway movement, this tipper can readily be prepped for over-the-road transport, and no foundation is required. The portable tipper can tackle the most challenging bulk material handling applications. It features walkways and handrails on both sides of the platform, two (2) HYCO, 4-stage cylinders, ramp with walkway and handrails, fixed backstop, surface preparation to SSPC-SP6, rust inhibitive primer, and finished with industrial enamel. Choose from either a diesel HPU or an electric, which are also in stock and ready to ship. Muscatine, IA 563-264-8066 Call for Price

Morbark Trailer Tipper

This unique combination board edger/ multi-gang rip saw has capabilities of edging, splitting boards and even panels. saws can be configured to almost unlimited possibilities. Heavy duty construction https://akkuslarmachine.com/products/. This one is in stock and ready to load. It also includes a set of saw blades. 931-797-6284. or Call Amy 928-723-9449 with super grip chrome feed rolls. Quality and performance with every cut Simple Handling and Operation Easy access for routine checks and maintenance Just Call or text Kittrell Sawmill Brokers 931-797-6284 comes complete with controls and operator controls. Try before you buy

The HCD2M 250 Double Arbor Gang Saw is designed for cutting timbers with a thickness of 9-3/4" and 27-1/2" wide Saw arbors are fixed. Hydraulic feed with knurled rolls top press roll is adjust hydraulically. Cutting rate is 65' per minute. For more information call Jackie Kittrell 931-698-3342 - 931-797-6284

HTPM 250 Machine chips small logs with right and left chipping heads and profilers in one pass the HPM 250 goes behind this chipping module to maximize use of the roughest logs to make good lumber See pictures to see one in production.

This machine is designed for cutting a max height of 4"X 27-1/2 holds up to 6 saws and can be used for a Multi Gang Rip as well.

This edger is designed to cut cants and boards with max of 4-1/2 in height There are 3 saws with 2 shifting saws. Hydraulic feed with knurled feed rolls. Indeed top press roll is hydraulic comes with motor & PLC controls and joy stick controllers Call Rachel 931-698-3342

This bull type gang edger is truly the beast. Arbor runs up to 8 saws with a combination arrangement that fits your needs. 4 3/4 inch X 25.5 inch input with the output of 1/2" to 4-3/4" with 6-1/4 thick capability. Cutting process is provided with diamond circular saws, single saw shaft is fixed. Hydraulic roller with fence. Infeed top press roll is hydraulic. Cut grade, pallet stock or pallet cants with this mighty machine comes with a set of spare parts. Call 931-797-6284

This mighty bull gang edger is ready for work. Cutting 6.25" X 27.5" cuts down to 1/2" boards. This 100 HP single arbor machine has diamond circular saws, Single saw arbor is fixed. Hydraulic feed through with hydraulic top press roll. Infeed table with hydraulic feed roller and fence for accuracy in sawing. This machine is available in a double arbor machine which will cut a little faster than the single. This saw has (2) 50 hp independent arbor motors for the double arbor machine. See it at IWF in August 2024 or order yours today. 931-698-3342

Log head saw cutting system. It is designed to cut logs using your favorite carriage with a diameter range of 6" to 27.3/4" cutting process is provided with maximum precision with two fixed strobe circular saw. That's back and forth on the track this is a double cut head rig. (2) 60 HP motors run 60' per minute. The saw pictured here was a trade in and will be retrofitted at the factory. Call 931-698-3342

4 saw edger with 3 movable saws and saw auto lube system with PLC joy stick controller. Adjustable for 4-3/4" material hydraulic cylinder saw position station Hydraulic feed through comes with motor and PLC control cabinet. Buy and Conveyors with jump up chains available as well. Special Deal Laser Lights and saws will be on this machine only and included in the price call 931-698-3342 Jackie Kittrell Huge dealer discount and Try before you buy you don't like it send it back. But we are certain you will love it.

This 4 saw 16' x 6" multi saw trimmer will easily cut boards and cants in a multi cut product or simply double end trim. Fixed saw precision end cuts the lumber and 3 movable saws are easily adjusted with a slide and lock motion. Independent saw motors with 5.5 KW or about 7.5 hp motors. Quality and Performance in every cut simple handling, operation and maintenance. Call Kittrell 931-797-6284

This beefy mighty machine is perfect for cross ties and custom timbers, and pallet and lumber cants. Single cut or double cut side boards. Excellent log turner with sharp chain feed through for lengths up to 60' special order. Operators controls Nice tailing device with center press roll section for timbers/ cants and ties. Quality and performance with every cut. Simple operation and maintenance. Call Kittrell Sawmill Brokers 931-698-3342

HYM 350 Hydraulic Horizontal Slab Reclaim Saw with operator controls (2) 40 HP motors cuts boards as short as 48" X 4-3/4 to 13-3/4 wide X 1/2 to 4-3/4 thick. This might slab saw will produce boards from slabs that would normally go to the chipper. Reclaim and pay for this mighty saw

this mighty slab saw is compact and can cut singles and doubles. Saws adjust with the touch of a control. Horizontal set up and each independent arbor holds 2 saws and has its own motor for faster recovery for doubles. Air press roll on infeed with fence Hydraulic side feed roll includes motor controls and PLC controls. 60 HP motor Ready to hook to your 440 Volt power Just need a single slab saw? Look at the Akkuslar HYM 350 Call 931-797-6284

ALJON - 400XL, ...Logger/BalerSpecifications: --Scrap Metal (average): 6 - 10+ Metric tons/Hr. -- Approx. (14,500) hours.Dimensions: --Height: 13 Ft. - 6 in. (4,115 mm). --Width: 8 Ft. (2,438 mm). --Length: 39 Ft. (11,887 mm). --Weight: 61,850 Lbs (28,055 kG). --Tires: 11:00 x 22.5 Tubeless Radial Tire. --Loading Area: 8 Ft. (2,438 mm) x 12 ft. 4 in. (3,759 mm). --Log Size: 20 In. (508 mm) high x 32 in. (813 mm) wide x variable length. --Density: 25 - 60 Lbs/cu. ft (400 - 961 kG/cbm).Material Handler --23 Ft. (7,010 mm) Boom Reach. --The "400XL" Baler’s curved box design and larger loading chamber efficiently process: Bulky loose scrap, white goods, and gauge material down to manageable 20 in. (508 mm) x 32 in. (813 mm) x variable bundles; 20 in. (508 mm) minimum. The operator controls the 3-way compression process from the cab.Final compression is fully automatic. Increased hydraulic power allows the operator to sort & stack material during the automatic baling cycle, eliminating lost labor time and minimizing the labor cost per ton. -- NOTE: The main piston needs work (leaking), and (1) piston that closes the box needs to be rebuilt.See the attached literature for detailed technical specifications.

ALJON - 580CL: Car Logger BalerNEW IN 2020 - (3,600) HOURS10' x 19' Chamber and "L-Box" design; swallows vehicles as large as full-size Vans with ease.Specifications: -- Open Chamber: 19-1/4' x 10.1' x 3.6'. -- Bale size: 40" x 25" x Variable. -- Production: (20 - 25) Per hour. -- Scrap metal productions: (17 - 20+) Metric tons/hour. -- Power unit: CUMMINS Diesel Engine.Features: -- "L-Box" Design.

ALJON - 580CL: Car Logger Baler With a 10' x 19' chamber and L-box design, it can swallow vehicles as large as full-size vans with ease. NOTE: Missing grapple; has arm but no grapple.Specifications -- Open Chamber: 19-1/4' x 10.1' x 3.6'. -- Bale size: 40" x 25" x Variable. -- Production: (20 - 25) Per hour. -- Scrap metal productions: 17 - 20+ Metric tons/hour. -- Power Unit: CUMMINS Diesel Engine. -- Engine was rebuilt; unit has (1,353) hrs. on it.Features: -- L-Box design. -- New in 2008.

ALJON - IMPACT V, Used Car CrusherSpecifications: -- 40-Gallon Diesel Tank. -- Loading Area: 84" W x 240" L. -- Overall Dimensions: 43' L x 8' W x 13-1/2' H. -- 8" Bore cylinder, 5" dia. shaft. -- 81" Stroke cylinder. -- 301,600 Lbs Total combined Cylinder Force. -- 3,250 PSI.

ALDO BERRONE AIRONE 2 Single End Tenoner3-Station Tenoner with Trim; top & bottom tenons and cope head with manual sliding table. -- 1st Station: Trim saw, 10" max. dia. saw blade. -- 2nd Station: Top & bottom tenon heads, 25 mm dia. x 3-15/16" long spindles, 3/16" - 2-1/16" max. tenon thickness, 3 HP motor belt driven to saw & tenon heads. -- 3rd Station: Cope head, 35 mm dia. x 3-15/16" long spindle, 9-7/8" - 11-7/8" max. cutting circle, 2 HP motor. Equipped with: --² 15" Long x 12" wide sliding table (approx. 50" travel), tilts 0ø - 30ø down, -- Overhead pneumatic holddown and tilting fence line;