Sanders For Sale

SUPERBRUSH 49 x 2 Double Brush Sander, (2) 10 HP Main Motors. -- "SendSmart" automatic control of the infinite-variable feed rate (0 - 15 ft./min.) for the conveyor gives a perfect finish. -- Precisely dimension stock within .010" across width of sander. -- 49" Wide sanding capacity. -- Multiple grit sanding in single pass with double drums. -- Precision-flattened steel conveyor bed reinforced with four steel cross sections for no "flex". -- Self-cooling drum with abrasive Take-Up-Fastners make changing abrasive quick and easy plus keeping abrasive tightly secured to the drum. -- Sand as thick as 12" and as thin as 1/32" with a min. length of 3-1/2". -- Drum ball bearings are sealed and permanently lubricated. -- Electric height adjustment, high speed and adjustable speed. -- Cast stand, zinc-plated steel bed, centerless ground column tubes. -- Shipped assembled, some minimal assembly required. -- Includes: (2) Brushes, Caster Set . -- Dust collection mandatory, requires 1,800 CFM. -- Equipped with: PROSCALE DRO (digital read out).

Tidland 470 Sander This system was used in a particle board plant that has been closed around 10 years.

TIMESAVER - 113, ...12" Width Single-Head Wide Belt Sander12" Width cap., single drum.Specifications: -- 12" Width capacity. -- 7.5 HP Main motor. -- 6" Dia. drum. -- 0 - 8" Opening capacity. -- 0.5 HP Feed motor. -- Complete with: Posi-Trac electronic tracking and a 12" conveyor extension.

TIMESAVER 1321-14-01 43" Wide Belt Sander (2) Heads:43" width cap., drum, combination head.Head Configuration:1st Head: Rubber covered contact roll, 8" dia. with dial indicator heigth adjustment, 20 HP motor.2nd Head: Combination head with a rubber covered contact roll 3-3/8" dia. and 2-1/2" wide finishing platen, 15 HP motor.Specifications: -- Abrasive belt size: 43" x 60" -- Main motors: 20HP & 15HP -- Maximum width stock: 42" -- Minimum part length: 13" -- Maximum thickness opening: 5" -- Feed speed: 15-45 FPM -- Passline height: 33-38" -- Dust extraction: 2000 CFM (5" static pressure) -- Compressed air usage: 4 CFM @ 90 psiEquipped with & Features -- Four Jack Bed Construction -- Dual Infeed and Dual Outfeed Holddown Rolls --Air Operated Disc Brakes -- Centralized Control PanelInfeed Stop Bar -- Hour Meter -- Main Motor Percentage Load Meters -- Electronic Go-To Device -- Motorized Thickness Adjustment -- Through-Beam Abrasive Belt Tracking -- Quick Release Outboard Support -- Variable Speed Conveyor Drive

TIMESAVERS 137-1 SINGLE HEAD WIDE BELT SANDERSpecifications: -- 36" Width capacity, combination sanding head with 6" dia. spiral grooved rubber contact roll. -- 1-1/2" Wide adjustable height polishing platen on slide out assembly. -- 37" x 60" Abrasive belt size.Equipped with: -- 20 HP Main motor, -- Electric eye abrasive belt tracking, and limit switch monitoring. -- 1 HP feed motor with a fixed speed of 30FPM. -- 0" - 8" manual part thickness opening of conveyor bed. -- Double infeed & outfeed rubber covered holddown rollers. Complete with: -- 18" Infeed conveyor extension, motor load meter, and safety stop bar.

TIMESAVERS 137-2HD Double Head, 36" Wide Belt Sander. 2-Head, 36" width cap.Specifications: -- 1st Head: 6" Dia. rubber-covered contact roll, 25 HP motor; -- 2nd Head: 2-1/2" Wide finishing platen, 15 HP motor. -- 37" x 60" Abrasive belts, "Posi-Trak" electronic tracking & pneumatic tensioning, 15 - 45 FPM variable feed speed. Equipped with: -- Double infeed & outfeed spring loaded holddown rolls, 0" - 8" max. manual part thickness opening with mechanical digital readout, air-operated disc brakes, motor load meters. -- 21" Infeed conveyor extension, and infeed emergency stop. -- Includes: (1) Extra rubber covered roll, (1) pipe, (1) Elec. disconnect.

TIMESAVER - 143-2HP75, ...2-Head Wide Belt Sander43" Width cap., Drum & Platen.Head Configuration:1st Head: 6" Dia. rubber covered contact roll, 25 HP motor.2nd Head: 2-1/2" Wide finishing platen, 15 HP motor.Specifications: -- 43" x 75" Abrasive belts. -- "Posi-Trak" Electronic tracking & pneumatic tensioning. -- 15 - 45 FPM variable feed speed. -- Automatic conveyor belt tracking. -- Constant Passline height 30" - 38", with 0 - 8" opening.Equipped with & Features -- Double infeed & outfeed spring loaded holddown rolls -- 0" - 8" max. manual part thickness opening --Mechanical digital readout --Air operated disc brakes --Motor load meters --21" infeed conveyor extension, and infeed emergency stop. --interlock switch located on belt loading door to stop sanding head if opened --Load meter to show amount of main motor hp used during operation --Mechanical digital readout operates below 90 dba --Operator manuals, control tags, danger signs and warning labels. --Quick release outboard support thickness setup device --Single cylinder air tensioning of abrasive belt for increased belt lifeNote Some spec's need to be verified

TIMESAVERS 252-4-IC, ... Wide Belt Sander, 4-Head.4-Head, 51" cap. - Great sander for solid wood and veneer panels equipped with (2) Contact rolls and (2) Air platens. Head Configuration1st Head: Rubber covered contact roll, 9-1/2" dia. 60 - 70 Durometer, 40 HP motor.2nd Head: Rubber covered contact roll, 9-1/2" dia. 50-60 Durometer, 30 HP Motor.3rd and 4th Head: Finishing platens, 2-1/2" wide "Veneer Saver" inflateable platens with adjustable timers for leading and trailing edges, 20 HP motor each head.Specifications: -- 38" Constant pass line height of Vacuum conveyor with suction fan and motor bed assembly for veneer and solid wood sanding. -- Adjustable air floating infeed and outfeed hold down shoes. -- 52" x 103" abrasive belts with "POSI-TRAK" electronic tracking.Equipped with & Features: -- Motorized part thickness adjustment with mechanical digital readout. -- Auto part thickness set-up, 0" - 6" opening. -- Hydraulic feed belt operation of 15 - 45 FPM via 7-1/2 HP hydraulic pack. -- 4-Motor load meters, controls mounted on belt loading side. -- Disc brakes on sanding head motors. -- 30" Infeed load area.

TIMESAVERS 2321-23-1 Wide Belt Sander, (2) Heads37" Width capacity, Drum and Combination Drum/Platen HeadHead Configuration:1st Head: Rubber contact roll, 25 HP motor (8” diameter 70 shore rubber grooved contact roller)2nd Head: Combination head with a rubber covered contact roll 5-1/2" dia. and 2-1/2" wide polishing platen Specifications: -- 37" x 75" Abrasive belts. -- "Posi-Trak" electronic tracking & pneumatic tensioning. -- 15 - 45 FPM Variable feed speed with inverter control. -- Automatic conveyor belt tracking. -- Double infeed & outfeed spring loaded holddown rolls. -- 0" - 5" Max. motorized part thickness opening with automatic part thickness set-up, -- Air operated disc brakes and Motor load meters, -- 14" Infeed conveyor area, and infeed emergency stop bar.Equipped with & Features -- Quick release outboard support. -- Four bed jacks. -- Digital thickness readout. -- Centralized control panel.

TIMESAVER 2331-24-001 Wide Belt Sander, (3) Heads: 43" Width cap. Drum, Drum, Combination Head.Head Configuration.1st Head: Spiral Rubber covered contact roll, 65 to 70 duro 8" dia., 25 HP motor.2nd Head: Spiral Rubber covered contact roll, 65 to 70 duro 8" dia., 20 HP motor.3rd Head: Combination head with 5-1/2" dia. 65 to 70 duro spiral grooved rubber contact roll and 2-1/2" platen - 15 HPSpecifications: -- 43" x 75" Abrasive belts. -- "Posi-Trak" electronic tracking & pneumatic tensioning. -- Contact roll & platen height adjustments with dial indicators. -- Conveyor belt feed, 20 - 45 FPM variable feed speed. -- Automatic conveyor belt tracking. -- Double infeed & outfeed spring loaded holddown rolls. -- 0" - 5" Max. motorized part thickness opening with LED readout. Equipped with & Features: -- Automatic part thickness setup. -- Air operated disc brakes. -- Motor load meters. -- 14" Infeed conveyor area, and infeed emergency stop.

TIMESAVERS - 237-2, ...2-Head Wide Belt Sander36" Width capacity; Drum, Drum.Head Configuration:1st Head: Steel contact roll, 9-1/2" dia., 25 HP motor.2nd Head: Rubber covered roll, 9-1/2" dia., 20 HP motor.Specifications: -- 37" x 75" Abrasive belts. -- Motorized part thickness adjustment with mechanical digital readout, 0" - 6" opening. -- Infeed & outfeed spring-loaded holddown rolls and shoes. -- 15 - 45 FPM Variable feed speed. Equipped with & Features: -- Motor load meters. -- Infeed emergency stop bar. -- Disc brakes on sanding head motors. -- 24" Infeed load area.

TIMESAVER 237-3 IC Wide Belt Sander: 3-Head, 36" cap. - Drum, Drum, Finishing Platen. -- 1st Head: Rubber covered contact roll, 11-1/2" dia., 50 HP motor; -- 2nd Head: Finishing platen 2-1/2" 30 HP motor. -- 3rd Head: Finishing platen 2-1/2" wide, 30 HP motor. Specifications: -- 37" x 75" Abrasive belts. -- "POSI-TRAK" electronic sanding belt tracking. -- Motorized part thickness adjustment. -- 0" - 6" Opening, automatic part thickness adjustment. -- Infeed & outfeed spring loaded holddown shoes. -- Variable feed speed from 15 - 45 FPM, 5 HP feed motor.Additional Features: -- Motor load meters. -- Infeed emergency stop bar. -- Controls mounted on belt loading side. , -- Disc brakes on sanding head motors. -- 30" Infeed load area.Actual model: TIMESAVERS "237-3IC"

TIMESAVERS 237-4IC Four-Head Wide Belt Sander37" Width cap. Drum, Drum, Drum, PlatenHead Configuration:1st Head: Rubber covered contact roll, 9-1/2" dia., 30 HP motor;2nd Head: Rubber covered contact roll, 9-1/2 " dia., 25 HP Motor. 3rd Head: 9-1/2" Grooved Rubber Covered Contact Drum With A 20 HP Motor4th Head: Finishing platen, 2-1/2" wide, 20 HP motorSpecification -- 37" x 75" abrasive belts with Pneumatic tracking. -- Motorized part thickness adjustment, height, 0" - 6" opening. -- Automatic part thickness adjustment, -- Infeed & outfeed spring loaded holddown shoes, -- Variable feed speed from 15 - 45 FPM, 5 HP motor. -- Pneumatic feed beltEquipped with & Features: -- Motor load meters, -- Infeed emergency stop bar, -- Controls mounted on belt loading side, -- Automatic Trabon bearing lubrication system, -- Disc brakes on sanding head motors, -- 30" infeed load area.Note: Some spec's need to be verified

TimeSaver Mdl 325-2 36" Wide Belt Sander S/N 7887

TIMESAVER - 337-2, ...2-Head Wide Belt Sander36" Width cap., Drum & Combination HeadHead Configurations:1st Head: 11-1/2" Dia. spiral grooved rubber contact roll 40 HP motor.2nd Head: Combination Head, Rubber contact Roll & Platen 30 HOSpecifications: -- 37" x 75" Abrasive belts with pneumatic tracking. -- 2 HP Feed drive; Variable feed speed from 20 - 60 FPM. -- Infeed & outfeed spring loaded holddown rolls on both heads. -- Motorized thickness adjustment with indicator, 0" - 6" opening. -- Infeed safety stop bar. - Also has adjustable shoes before and after each head. Equipped with & Features: -- Controls mounted on belt loading side. -- Sanding head motors with air caliper disc brakes --Motor load meters.

TIMESAVER 337-2 Wide Belt Sander, (2) Heads36" Width cap., Drum, Combination HeadHead Configurations:1st Head: 11-1/2" Dia. spiral grooved rubber contact roll 40 HP motor.2nd Head: Combination Head, Drum with Platen 30 HP motor. Specifications -- 37" x 75" Abrasive belts with pneumatic tracking. -- 2 HP feed drive; Variable feed speed from 20 - 60 FPM.Equipped with & Features -- Infeed & outfeed spring loaded holddown rolls on both heads. -- Motorized thickness adjustment with indicator, -- 0" - 6" opening. -- Infeed safety stop -- Adjustable shoes before and after each head. -- Controls mounted on belt loading side, --Sanding head motors with air caliper disc brakes, and motor load meters.

Timesaver Mdl 337-6 36" Belt Sander S/N 18395

Timesavers 43" Speedsander Single Phase Machine

TIMESAVERS - 4321-45-01, ...2-Head 52" Wide Belt Sander.Head Configuration:1st Head: 9-1/2" Dia. rubber-covered contact roll, infeed & outfeed spring-loaded holddown shoes & pinch rolls; 40 HP Motor.2nd Head: Combination head with: 6" Dia. Rubber-covered contact roll & 2-1/2" wide Platen, infeed spring-loaded holddown shoe & outfeed double pinch rolls; 30 HP motor. 3rd Station: Panel Cleaning Brush.Specifications: -- 6" Thickness capacity. -- Variable speed feeds from 15 - 45 FPM. -- 52" x 103" Abrasive belt size.Equipped with & Features: -- Automatic part thickness adjustment with digital thickness indicator. -- Dual "POSI-TRAK" electronic abrasive belt tracking. -- Air caliper disc motor brakes and load meters. -- Infeed safety stop bar.

Single Head Top and Bottom Sander