Equipment For Sale

2001 Bandit 3680 with Cat 3412 860hp, with 8,000 hours. Radio remote, and Magnetic head pulley. Redone summer of 2021. Ran sept 21-March 22 parked until June 22 did a 3 week job then parked until November 22. Ran until March 23. Newer floor, Frame restructure, All hydraulic cylinders and hoses replaced. Hydraulic tank drained and cleaned. New: Clutch, Drive belts, Starter, Anvil, 2 augers and bearings and chain, Discharge top bearings and motor. Length: 44’ Width: 10’10” Height: 13’ 6” Weight: 62,500 lbs. Fuel Tank: 400 gal. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2011 Bandit Beast Model 3680, Caterpillar Model C-18 765 HP Turbo Diesel with Only 2,300 Original Hours , Magnetic Head Pulley on Discharge Conveyor, , Air Compressor, Wireless Remoter Control,and Tether Cord Control, Autofeed Reverse System, Tri-Axle Unit with Hydraulic Tongue Jack with Air Brakes... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Bandit 2550 Self Propelled Stump Cutter with Deutz 44 HP Diesel Engine, 1,450 Hours, Tether Cord Remote and Wireless Control, Dual Rear Wheels, Hydraulic Swing Speed, Two Speed Drive, Front Grading Blade, Ready for Work. Width: 35” (89cm) Height: 53” (135cm) Length: 120” (305cm) WEIGHT: Approximately 820kg Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Bandit SG-40 Stump Grinder, Rev Wheel, 38HP EFI, Good Running Machine.

2022 Bandit SG40, Low Hours, 38HP EFI Kohler, Tracks, Rev Wheel, Ready to go to work.

2012 Bandit 4000T W/Mulching Head, 2892 Hours, Deere 425 HP Engine, Please Call For More Info

New 2023 BANDIT 1425 14"" Beast Grinder Includes the Following: - Cat C3.4 Engine with 120HP - 25"" Wide Feed - 40 Gallon Hydraulic Tank - 30 Gallon Fuel Tank - Remote Hydraulic Oil cooler & Cover - Standard Bandit Green Paint - NACD Manual Clutch - Radio Kit with Remote - Steel Chain infeed conveyor - Tandem Axle with Air Brakes - Bolt on Aluminum Fenders - Magnetic Head Pulley on Discharge w/ Steel Collector Pan - Non-Adjustable discharge w/ 7' height - Grinder Cutterhead with Rakers - Equipped with double short shingle teeth - Installed: 3"" Diamond Screen - Shipped Loose: 2"" Diamond Screen - Shipped Loose: 4"" Mod Diamond Screen - Shipped Loose: Extra Shingle and Blunt nose teeth 5 YEAR/5000 HR PLATINUM WARRANTY (CAT ENGINES)

2020 Bandit 3680T BEAST Tracked Horizontal Grinder - 1416 Engine Hours - 900 Grinding Hours - Cat C27 w/ 875 HP - PT Fluid Clutch - Remote Control - Automatic Greaser - Automatic Chain Oiler - On-board air compressor - Adjustable Discharge - 36"" Capacity - 30 Tooth Cutter mill This machine was just ran through by the Quality Equipment & Parts Service Department. Bandit dealer of 10 Years. - Infeed Chain: New Headshaft and Tailshaft, new bearings, some new infeed slats - New teeth & rakers on cuttermill - New Screen & Gate - New Poly slide boards on Primary Discharge - New Anvil Bar - On-board air compressor serviced - New grease lines

2014 Bandit Beast 4680 Track Horizontal Grinder, Equipped with a Tier 2 CAT C-27 1050 HP Turbo Diesel Engine with 3,500 Hours, Reverse Fan ,Compressor , Magnetic Pulley Head on Shorter Length Discharge Chute , Additional Screens all sizes, Undercarriage 95% Wireless Remote Control with Tether Cord Electric Winch for screen installation... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2010 horizontal grinder/chipper mobile track 2800 hours New twin Disc clutch New conveyor New 3 stage pump New cutter mill drive belts Currently mill is converted to chip knives Have all cutterbodies, teeth, screens and gate to convert to grinding.

2022 Bandit SG40 Stump Grinder, Kohler 38 hp EFI Gas with 238hours, New Belts, 18” diameter x 1/2 thick New Revolution cutterwheel with 47” swing, Adjustable rubber tracks. L 100.5” W 29” H 48” Lbs 1,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Bandit 2550XP Stump Grinder -Kubota gas engine -Beltless hydrostatic direct-drive -Standard 4-wheel drive -35” wide grading blade -Rubber tires -Approx 150 hours REDUCED PRICE

2017 Bandit Beast 4680T -1800 hours -1050 hp Cat c27 -Spare New Screens -48 tooth mill -New overband magnet -Newer discharge belt

2021 Bandit 1425 Beast Recycler with Liquid Color Unit, Cat 125hp Diesel with 114hrs, 2” and 4” Screens. Width. 98 in. Height. 120 in. Length. 288 in. Weight. 12500 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2008 Bandit 1590XP Drum Chipper with140hp John Deere Engine, winch, auto feed, lift cylinder, Ex municipal machine in very good shape. Length: 12' 6" Width: 8' 6" Height: 9' 3" Weight: 12,500 pounds (approximate) Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Bandit 18XP with 165hp V8 GM gas engine with 2200hrs, Winch and loaded with extras, Lift Cylinder, Hand Crank Turn and Height Adjustable Discharge. Length: 20’ 2” Width: 7’ 4” Height: 8’ 8” Weight: 9,700 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2023 Bandit 2590T Beast -160 hours -Gold warranty -Fully loaded -On tracks

2005 Bandit 150 Chipper 7300 hours Deutz intercooled engine No blow by New teeth New drum bearings New springs Good tires Work ready REDUCED

2015 Bandit 200UC Chipper -751 hours -74 hp kohler diesel -12 inch Ready to work

2021 Bandit SG-75 Tracked Stump Grinder, 75HP Kohler, Remote, Blade, Clean Low Hour Machine, Can Ship Nationwide.