Equipment For Sale

2009 Bandit 1900 Track Whole Tree Chipper, Cummins 535 HP Engine, Has 3900 Hours, Joystick Controls/Foot Pedal, Several Extra Sets of Knives, Counter Knives and Anvil , Undercarriage 75%, Enclosed Cab with Heat and AC, AC needs a Charge, New Clutch Engagement Switch Ready for the Woods. Weight 66,500 lbs. Length 285” Width 130” Height 142” Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Bandit 1590XP Chipper, Caterpillar Engine, NEW ENGINE, NEW TWIN DISC CLUTCH, Both from Caterpillar, 1500 Hours, Hand Crank Height and Hand Crank Swivel Chute, Lift Cylinder, Live Hydraulics, Autofeed, Hydraulic Winch, Ready for Work. Length: 16' Width: 7' 5" Height: 8' 8" Weight: 9,000 pounds (approximate) Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

CAT (755HP) 37" DIAMETER X 36" WIDE DRUM WITH (6) KNIVES 30" DIAMETER X 36" WIDE TOP FEED WHEEL 10 5/8" DIAMETER X 36" WIDE BOTTOM FEED WHEEL STANDARD 7 ½" INFEED CONVEYOR FORESTRY STYLE DISCHARGE WITH HYDRAULIC SIDE/UP OR DOWN END DEFLECTOR AIR COMPRESSOR DOUBLE GROUSER TACK PADS 62,000 LBS

2009 Bandit 2590 Drum Chipper, C13 Cat 540hp, Radio Remote, Infeed chain, Rear hydraulic stabilizer's. Weight 36,500 lbs Width 119 in Height 139 in Length 360 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Bandit 3090 Track Chipper -560 hours -800 hp -Like new Turn key chipper

Bandit 15XP Chipper, 165HP Ford Gas, Hydraulic Winch. Nice machine ready to work.

2020 Bandit 12XPC Chipper, Cat 74HP Diesel, Great Price and Ready to Work.

2012 Bandit 200, 86 hp Cat Engine, winch, lift cylinder auto feed. Width. 72 in. Height. 100 in. Length (Open) 202 in. Weight. 5,500 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Barberan UV Oven

BARKER Boiler and Fuel System built & tested in 2011 as a pilot unit. Successful testing has been completed. This surplus equipment includes the following main features: -- Combustion Temp Capability- 2,000 deg.F.; Steam Flow 24,000 lbs/hr saturated; Steam Pressure 1,500 PSI @ 600 deg. F. -- Fuel Feed rate - 3,000 Lbs/hr at 1/4" biomass (5% moisture) -- Heat Input - 7,500 btu/Lbs HHV @ 22 mmbtu/hr. -- All equipment has less than 2,500 actual operating hours since installation.EQUIPMENT MAJOR COMPONENTS: Combustor, Cyclonic combustion technology, Refractory lined Heat Recovery. Steam Generator. Rotary Drum Dryer for Fuel drying - capable of 30% moisture reduction (at the above combustion parameters) and 1.5 tons per hour (installed as used equipment).BALANCE OF PLANT FUEL FEED SYSTEM: Live-bottom bin, Bunker, Feed conveyors, Wood hog, Vibrating screen, Drag and screw conveyors. Boiler water system - feed pump,water and steam piping Emissions Control: All required baghouses (SJVUAPCD) California permitted. -- Now REDUCED PRICE from $1.5 million !!

2019 Barko Model 937B Mulcher, Equipped with a Seppi Star Forest 260 Mulching Head, Cummins Engine with 3,100 Hours, Enclosed Cab with Heat and Air Conditioning, Ready for the Woods. Length Without Attachment 20' 8" Overall Width 8' 11" Overall Height 10' 8.5" Approximate Operating Weight 31,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Barko 612 Forwarder, Volvo Engine, Original Hours are 8000 Hours, Enclosed Cab with Heat and Air Conditioning, New Front Tires in Front and Rear Tires are 90%, Centers Replaced, Kesla Loader, 28HD Bucket, Ready for the Woods. Length 33 ft 10 in Width 8 ft 8 in Height 11 ft 3 in Weight 35,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Barko 495ML for parts , runs and operates good turntable is shot . 4552 Rotobec

2004 Barko 495ML Log Loader 9k Hours on Rebuilt Cummins JD 230 Delimber w/Top Saw Morbark Ground Saw 20' Deck

NEW Barko 80 XLEs, Always In-Stock! Call for Specs & Prices

In Stock 2022 Barko 295B Log Loader, Mounted on New Pitts Trailer, CSI Reversible Bar Slasher, Barko Grapple. Call today for pricing.

Barko 225 Log Loader Believe its a 2004 John Deere 6068 engine Delimber New collector about 2 years old Runs and operates good Currently on job working daily PRICE REDUCED

2014 Barko 612 Forwarder, Volvo Engine, Original Hours are 8000 Hours, Enclosed Cab with Heat and Air Conditioning, New Front Tires in Front and Rear Tires are 90%, Centers Replaced, Kesla Loader, 28HD Bucket, Ready for the Woods. Length 33 ft 10 in Width 8 ft 8 in Height 11 ft 3 in Weight 35,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Call for details.

2019 Barko 495B Delimber CSI cut off saw Hanfab slasher 6500 Hours Pitts trailer Great condition