Equipment For Sale

CSI PTD264 delimber & Pitts carrier included. CSI DL-4400 saws shown are not included.

2013 Tigercat 620D Grapple Skidder, Winch, Has Cummins Engine, 1,250 Hours, Tires are 35.5, Dual Rings on on Rims, Enclosed Cab with Heat Air Radio, Every Pin and Bushing Replaced on the machine, New Parking Brake, Glass is Good, Exhaust Good, All Arch Pins Lined and Re-bored, Ready for the Woods. DIMENSIONS with standard tires and arch LENGTH 23'9" WIDTH 11' HEIGHT 10'4" WEIGHT 36,250 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2023 TIGERCAT LX855E FELLER BUNCHER, C ST5702-26 FELLING SAW ATTACHED, SIRIUS RADIO, TELEMATICS, PRE-HEAT SYSTEM

2017 Tiger Cat LX830D Feller Buncher -10146 Hours -New stick with new pins for stick 1700hrs ago -Resealed tool cylinder -New butt plate 1700hrs ago -New radiator 1500hrs ago -New tilt cylinder pins and bushing 1700hrs ago -Updated cooler -Complete new undercarriage about 2200 hrs ago -Has been serviced with fully synthetic oils -Ready to work

2017 Tigercat 822 Feller Buncher with 4,500 hours. 360 degree head, undercarriage is at 25%, with fire suppression. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 TIGERCAT 1085C FORWARDER, TC FG43 HD GRAPPLE

2018 TIGERCAT 1185 HARVESTER, TH570 HARVESTING HEAD

5702 110 degree rotation saw, 36" tri-trac

2008 Tigercat 840 Cutter

2010 TIGERCAT 480 MULCHER WITH FECON FGT9025 HEAD #209305 REBUILT ENGINE 5500 HRS

2019 Tigercat Lx870D -5702 Tigercat head -Cuts 26" -5017 hours -Leveler -Tight and dry Woods ready

2004 Tigercat 1018 forwarder Swivel Cab -16k hours -HTC computer and control system and hydraulic fine tuning system has 6500hrs since replacement -Articulation rams resealed and one has had new piston and rod done -Tires are getting towards the end probably 30% one is new -Everything works as it should -Air conditioner needs a new condenser unit -Injector pump was replaced 1000hrs ago -Doesn’t use any oil at all ( 8.3l Cummins 24valve) -Hydraulic pump was rebuilt by previous owner around 6000 hrs ago -Changed oil and filters every 150hrs and just recently done a service and all filters -Articulation joint and swivel joint is in new condition very tight smooth no play THIS IS IN AUSTRALIA!!!!!!!

2008 H855 Tigercat -All major components have been done -Engine -Pumps -Rotec Bearing Swing Motor -Gearbox New Outer Feed motors -Waratah 622B -20,000 hrs on Carrier -Under 3500 hrs on all major components. -Lots of spare Waratah parts and spare engine.

2005 Tigercat 822 Hotsaw Swamp pads UC 95% Cummins Working daily STOCK IMAGE PHOTOS COMING SOON

2007 Tigercat 720E Feller Buncher Engine has 6,500 Original Hours, Enclosed Cab with Heat and Air Conditioning , Center Section is Tight Good Tires Ready for the Woods... Operating Weight 26,350lb Overall Length 18.59ft in Overall Width 8.34ft in Height To Top Of Cab 11ft in Wheelbase 9.59ft in Ground Clearance 1.68in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Tigercat 860C Feller Buncher, 22" Saw Head is a Tigercat 5702 with 40-degree lateral Tilt. Only 7500 Hours, Pre DEF Engine, 60 % Undercarriage, Enclosed Cab with Heat and Air Conditioning, Fire Suppression, Non-Leveling Cab Overall Length 17.66ft in Overall Width 10.75ft in Height To Top Of Cab 10.83ft in Ground Clearance 2.33in Tail Swing Radius 4.75ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 TIGERCAT LX830D FELLER BUNCHER WITH TIGERCAT FELLING HEAD

This loader has been through our shop. Overall this is a tight and try loader. It has minimal pin wear. We installed new injectors. Engine runs good. Hydraulics are strong. Hydraulic legs. Loader is ready to go to work. We have both a RH and LH late model CSI DL-4400 bucksaw available as a package deal. Equipment financing and delivery available.

5000 HOURS 30.5 TIRES

2010 Tigercat 718E, 11,500 hrs., Cummins Engine, Good 28L-26 Tires, Disc is in good shape, Ready to work, $45,000