Woodworking Equipment For Sale

GIBEN KG-468-JKS EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): -- Specifications:Working Capacity: 0.4 - 3 mm Edge thickness capacity; minimum panel width 80 mm; minimal panel length 120 mm; panel thickness 10 - 60 mm adjustable feed speeds 10/15/20 MPM; motorized adjustment of the upper pressure beam. -- Equipped with: PREMELTING Glue System with: Quick change glue pot; top pot capacity 5 kG (11 Lbs); lower pot capacity 2 kG. -- Adjustable pressure roll section with: (1) Driven roller and (3) idler rollers.Workstations: -- 2-Motor Pre-milling Unit with independent adjustments. -- 2-Motor End Trimming Unit. -- Top & Bottom rough trim station. -- Top & Bottom radius fine trim station. -- 2-Motor Corner Rounding Unit. -- Top & Bottom profile scraping station. -- Top & Bottom flat scraping station. -- Top & Bottom Buffing station.Complete with & Features: -- "DELTA" PLC Control. -- Sound cabin for all workstations. -- Adjustable 700 mm outboard panel support. -- Actual Model is: GIBEN KG-468-JKS

GIBEN KS26J Edgebander with Pre-Milling & Corner RoundingSpecifications: -- Edge thickness 0.4 - 3 mm. -- Minimum panel width 80 mm, Panel thickness 8 - 50 mm. -- Feed speed 16 MPM, Mechanical adjustment of the upper pressure beam.Equipped with: -- 2 Liter Glue Teflon coated tank with Quick heating system. -- Adjustable pressure roll section with (1) Driven roller & (3) Idler rollers.Workstations: -- 2-Motor Pre-milling unit with Diamond tooling and with Independent adjustments. -- 2-Motor End trimming unit. -- Top & bottom trim station with diamond radius tooling . -- Double motor Corner Rounding unit. -- Top & bottom radius scraping station. -- Top and bottom Buffing unit.Complete with: -- PC Touch screen control. -- Sound cabin for all workstations. -- Adjustable outboard panel support.

GIBEN KG486JK EDGEBANDER (W/ PRE-MILL & CORNER ROUNDING): -- Specifications:Working Capacity 0.4 - 3 mm Edge thickness capacity. Minimum panel width 80 mm. Panel thickness 10 - 60 mm. Variable feed speeds 12 -20 MPM. Electronic adjustment of the upper pressure beam. -- Equipped with: PRE-MELTING GLUE SYSTEM With quick change glue pot (top pot capacity 5 kG / 11 Lbs), lower pot capacity 2 kG. -- Adjustable pressure roll section with (1) driven roller, and (3) idler rollers.Workstations: -- 2-Motor Pre-Milling Unit with independent adjustments. Diamond cutters included. -- 2-Motor End Trimming Unit. -- Top & bottom rough trim station. -- Top & bottom radius fine trim station. -- (4) Motor Corner Rounding Unit. -- Top and bottom edge scraping station -- (2) Top and bottom radius scraping stations, (1) for 1 mm & (1) for 3 mm. -- (2) Top & bottom Buffing stations for a super clean finish.Complete with & Features: -- "DELTA" Front-end "Touch Screen" Control. -- Cleaning/Release Agent sprayers at the front & back end of the machine. -- Sound cabin for all workstations. -- Adjustable outboard panel support. -- Actual Model is GIBEN KG486JK

ModelG4 49G4 510G4 512Table size2700 x 1300mm3100 x 1600mm3700 x 1600mmMax speed x/y/z80/80/30 m/min80/80/30 m/min80/80/30 m/minMain spindle18hp Max rotation speed24000rpm24000rpm24000rpm Vertical drills5 x 55 x 55 x 5 Rotation speed4500rpm4500rpm4500rpm Tool changer 8 position ride along Suction flow rate160m3/h160m3/h160m3/hDust extractionF200mm × 2 150mm x 2F200mm × 2 150mm x 2F200mm × 2 150mm x 2Overall size4500 x 10000 x 2500mm4500 x 12000 x 2500mm5000 x 13500 x 2600mmNet weight7100kg7500kg8000kg - The G4 Full line is a 3 axis cnc router designed for production needs in mind. - Standard 18hp main spindle with rotation of up to 24000rpms. - Drill block sizes: standard 5 x 5 and an optional 10 x 7. - Auto loading and off-loading helps create high efficiency and max parts output. Using a pusher bar with dust extraction and offload table with two additional ports to help maintain a clean shop and parts. - Standard features that separate the G4: auto-lubrication, meehanite cast ron table, fixed tool touch off device, and blast gate for dust extraction. - A ride along carousel type, tool changer with 8 tool capacity, mounted next to the spindle for fast and efficient tool change operations. - Optional 12 tool changer. - Optional auto label printing gantry or label printing mounted by the off-load table.

Giben K305 Edgebander Manufacturer specs (to be confirmed): Standard Configuration Panel Thickness: 10~60mm Edge Thickness: 0.4~3mm Motor Power: 2.35Kw Maximum Curve Radius: 20mm Cutter Maximum Range: 50mm Working Pressure: 0.6 MPa Outline Dimension: 960 x 950 x 1000mm Gross Weight: 280Kg Voltage: 220-480V

Giben Panel Saw

Gomad "DFDA-455" Sliding Table Single Spindle Shaper -- Specifications: 2 -1/64" (55 mm) spindle currently, 7.5 HP belt drive motor, (4) speeds 4,000/6,000/8,000 & 10,000 RPM, 3-9/16" spindle travel, 3/4" up to 2-11/64" dia. interchangeable spindle, reversing spindle rotation; heavy duty 36" x 40" cast iron table, (3) pneumatic clamps, double end fence, 4.5" dia. dust chute. -- Complete with: 13" wide sliding table, (4) Hold down springs, mounting collars & bolts, miter gauge with stop rod, and foot brake, capable of doing arch moulding work.NOTE: Great running condition before disconnect in 2013, currently stored in facility basement.

GOODSPEED HF 412 AO Vertical Oscillating Chair Back Sander Specifications: Table size 30” x 30” x 34-1/4” H. Equipped with: 12" W x 25" L Horizontal abrasive belt, with 12” H x 4” Dia. Aluminum & Spiral rubber drums, 12” H x 3-1/2” Dia. Spiral rubber feed drum, with 2 HP Motor & Variable feed speed control. 60 W Feed & Oscillation motors.

Approximately 27" width capacity 1/2" - 3.9" diameter capacity 10 HP spindle motor 1800-3200 spindle speed 3 HP hydraulic feed PLC sequence controller

3" - 41" length capacity 1" - 3" square or round diameter capacity 15 HP spindle motor Spindle speeds 2250, 3200, 3525, 4625 rpm hopper feed

INTOREX TXA-1200 Automatic Hydraulic Copy Lathe;Specifications: -- 1,200 mm (47-1/4") Max. turning length, 210 mm (8-1/4") max. turning diameter. -- Max. turning dia. with standard steady 90 mm (3.5"). -- (2) Hydraulic copiers. -- Max. size of square stock for turning with automatic feed 100 mm (3.9"). -- (3) Tool holder turrets. Hopper feed unit. -- (8) Head speeds in a range from 750 - 5,500 RPM. -- 6 HP or 7.5 HP Headstock spindle motor. -- 4 HP Hydraulic pump motor.

12' Arm 250 Lbs Capacity 4 HP Pump Per owner: head only turns horizonally

Gorbel 500 Lbs Ceiling Hoist

GRAINMATIC - CP-960, ...2-Head Wide Belt Sander42" Width cap.; Drum, Platen.Head Configuration:1st Head: Spiral rubber covered contact roll, 7-7/8" dia., 20 HP motor.2nd Head: Combination Head, spiral rubber contact roll, and finishing platen; 15 HP motor.Specifications: -- 36" W x 75" L abrasive belts with air jet tracking. -- Motorized part thickness adjustment with keypad entry and LED readout; 0" - 7" opening. -- Infeed & outfeed spring loaded rubber covered holddown rolls. -- Feed Motor: 3.5 HP -- Variable feed speed: 15 - 60 FPM.Equipped with & Features: -- Infeed emergency stop bar. -- Disc brakes on sanding head motors. --12" Infeed load area. --Volt meters on sanding head motors.NOTE: Some specs need to be verified.

GRASS - RAM, ...Drawer PressPneumatic Drawer Press used for pressing & inserting the GRASS SARGEN slide. -- Tabletop mount, foot pedal activation. -- NOTE: Machine is shown "as it is". Additional aluminum base frame was NOT shipped with this machine.

GRASS - ECOPRESS P, ...Boring Machine (Hinge) -- SpecificationsPneumatic tabletop unit mounted on welded frame base; hinge boring w/GRASS inserter block.(1) 3-Spindle boring head for hinges; 1 HP motor. -- Drill unit & insertion head and (2) spring loaded holddown cylinders operate pneumatically. Boring depth automatically sets to the material thickness being processed. -- Complete with: &#9679 450 x 730 mm Extruded aluminum framework table.&#9679 LH & RH material side stops. -- Actual Model: GRASS ECOPRESS P

GRECON PJ 150/500 and PF 10-610 Finger Jointer and PressFinger jointer and Press systemSpecifications: -- Grecon Finger Joint System Including: Model PJ 150/500 Shaper -- Trim Saw 5 HP -- Shaper Head 30 HP -- Glue Application Head -- Timber Width 30 mm - 159 mm (1.2" - 6.25") -- Timber Thickness 12 mm - 80 mm (.5" - 3.15") -- Timber Length 250 mm - 1780 mm (9.84" - 70") -- Infeed Belt Conveyor 20" Wide X 34" LongAfter the Finger joint shaper: -- Manual Roll Conveyor with Rotation for Turning Workpieces 22" X 68" -- Outfeed Belt Conveyor 20" X 39" -- Driven Roll Conveyor 20" X 120" -- Powered Belt Conveyor Prior to Press 7" X 86"Model Press PJ 10/6100 Finger Joint Assembly Press: -- Maximum Pressing Length 240" -- Cut-Off Saw Motor 3HPNote: The machine will be reconditioned upon placement of order.

Equipped with Glue Head

Greenfield Machinery Splitter Saw

Greenlee tennoner with 5 heads on each side. Call 800-459-2148 for more info.