Mobile Wood Chippers For Sale

2005 Bandit 2400T Whole Tree Track Chipper , Only 3,021 Original Hours, Undercarriage is 95% Enclosed Operators Cab with Heat and Cold Air, Caterpillar 765 HP Turbo Diesel Engine, Cat Infeed Chain with 4 Roller Feed System., Autofeed , Hydraulic Swivel Discharge, Hydraulic Flapper Engine Pre Cleaners Hydraulic Oil Coolers Rotobec 360 Degree Grapple... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Bandit 3680 Beast Recycler, C15 cat 545 HP Non-emissions engine with 9284 hours Radio Remote, Magnetic Head Pulley, 5th Wheel, Bandit rebuilt the mill area in 2019. Weight. 62500 lbs. Width. 130 in. Height. 162 in. Length. 528 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Bandit 2290 20” Drum Whole Tree Chipper, 440 Cat Diesel with 3,045 Hours, Tether Remote and New Radio Remote, 5 1/2’ Infeed Conveyor, Babbited Knives, Light Package, Dual Stabilizer... Popular for its great combination of size, production, performance and price, the 20-inch capacity Model 2290 whole tree chipper is a favorite for chipping tops and brushy material, either in traditional logging operations or land clearing projects. Its 24.5-inch by 26.25-inch throat opening easily accepts large diameter, brushy material. Dual feed wheels in Bandit’s unique Slide Box Feed System provide the industry’s best pulling and crushing power, while aggressive chip throwing power fully loads trailers in approximately 35-40 minutes. Length: 21’ 640.08 cm Width: 10’ 2” 309.9 cm Height: 11’ 6” 350.5 cm Weight: 40,000 - 46,000 lbs (18,143.7 - 20,865 kg) Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

BANDIT BRUSH BANDIT MODEL 95 CHIPPER Hydraulic Dump Bed Rebuilt Deutz 300 Hours Low Use Machine

Bandit 990TK Tracked 12" Chipper. Remote Control, Low 380 Hours. Chipper in excellent shape. Call today.

2019 Bandit Intimidator 15XPC Brush Chipper, Gasoline Engine, Trailer Mounted, Hour Meter Reads: 512

2023 Bandit Intimidator 18XP Chipper 180 Hours Ford 6.2L gas engine GVWR 9,000lbs Oil changes and general maintenance completed as specified by manufacturer. General warranties still active. PRICE REDUCED

2022 Carlton 2015 Tree Chipper, Deere 140HP Diesel, Hydraulic Winch.

FARMI CH 100 F is designed as a robust and inexpensive disc chipper for landscaping to chip branches and small trees up to a diameter of 100 mm. The FARMI CH 100 F can be mounted onto a small tractor giving a compact chipping machine in gardens, parks, yards and road sides. Two knives and an anvil take care of chipping and feeding. CH 100 F chipper is available as a tractor PTO versions or as a hydraulic driven option.

2016 Morbark Beever M12D 1,237 Hours Auto Feed 89hp Power Solutions International (PSI) 3.0L gas motor TorqMax Feed Wheel Compression System Hydraulic Lift Yoke Cylinder 53" Folding Feed Table 18" x 12" Throat Capacity Fully serviced with new fluids, filters, tires, wheels, knives, battery and rain cap 360 Degree Rotating Adjustable Chute LED lights

Cat 3412E 860hp Engine status report shows 43% average load factor, 3317 idle hours. 8899 hours on original engine. Completely serviced and runs properly. Morlift 500 loader with tight grapple, A/C cab all nicely fitted. Auxiliary air compressor Michigan model 40 knife grinder Extra knives Very sound, tidy chipper throughout. Call for complete condition report.

2012 Morbark M18RX 18" Drum Chipper, John Deere 4 cylinder, 4,248 hours, Good condition, Winch, knives. Height:9'4" Width:7'8" Length18'3" Gross weight (approximate):9,550 - 11,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2011 Morbark M20R Track Chipper, Cat 415HP with 5090 hours, Radio Remote, Infeed conveyor, Woods ready. H 11’5” W 8’6” L 22’9” 26,540 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

MORBARK MODEL 20 TRACK CHIPPER 5,888 HOURS CATERPILLAR 425 ENGINE RECENT ENGINE REBUILD RECENT CLUTCH PLATE RECENT BEARINGS GOOD UNDERCARRIAGE GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

1977 MORBARK 22 TREE CHIPPER RECENT CUMMINS ENGINE RECENT CLUTCH SLIDE BOOM LOTS OF RECENT PARTS GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN GRANITEHE.COM

1983 MORBARK RXL 27 TOTAL CHIP HARVESTOR 5,110 HOURS 600 CUMMINS UPDATED SPREAD BEARINGS RUNS GREAT WORK READY FINANCING AVAILABLE WITH NO MONEY DOWN GRANITEHE.COM

2008 MORBARK TYPHOON 20 CHIPPER -400 horsepower John Deere(rebuilt within the last five hundred hours) -new injectors and new injection pump new fuel pump -new head -new belts -hydraulic pumps -replaced all hydraulic valves -new brakes -all new fluids and filters -new paint chipper has remote control to that works -recently put on 12000 pound winch on back

2007 Morbark Typhoon 20 Whole Tree Chipper, Equipped with Loader and Operator Platform, John Deere 325 HP Turbo Diesel Engine, New Completely Rebuilt Engine with 20 Hours, 6,000 Frame Hours, Hydraulic Tongue Jack , Autofeed System, No Winch . Great Running Machine... HEIGHT 11' WIDTH 8' LENGTH 26'8" GROSS WEIGHT 18,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

-400 horsepower John Deere(rebuilt within the last five hundred hours) -new injectors and new injection pump new fuel pump -new head -new belts -hydraulic pumps -replaced all hydraulic valves -new brakes -all new fluids and filters -new paint chipper has remote control to that works -recently put on 12000 pound winch on back

2006 Morbark Hurricane 18 with 4,942 hours. 18" chipping capacity, Caterpillar 213 pre emission diesel, 1,593 hours on newer motor. Machine has full hydraulics- 360' rotation chute, (3) jacks and 5000 LB winch. New: blades , blade bolts , blade pockets, cutter bar, drum bearings, blade belts , feeder wheel chain, 150' winch line with dog bone, batteries, leaf springs, fluids, filters, paint, waiting on sticker kit from Morbark. Ready for work. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.