Stationary Wood Chippers For Sale

Precision 66" 6 Knife Chipper

Precision 58" 6 Knife Chipper w/Horizontal Feed Top Discharge S/N 3135

Precicion 66" Chipper 6 Knife Horizontal Infeed / Top Discharge S/N C-2865

48" 3 Knife Chip Pack S/N C-1029 75HP Electric Motor 5'x 5' Chip Screen

Precision 58" Chip Pac 6-Knives 72" Cyclone H-Type blower with dual load out chutes 6'x6' Screen 25' Vibrating Infeed with transition chute to chipper with fiberglass section and MDI metal detector

Precision 58" Chipper - Model 58-60-16 6 Knife 150 HP Motor

The seller has confirmed that this 96" Precision chipper is in good working/running condition and is ready to load. This was not heavily run. This came out of a chip plant in WA. Model 96.27 - Horizontal feed - Side discharge - 4-Knife whole log chipper - 8" thick chipper dissc - Built in disc brake - Extended front shaft for hydraulic starter - Hydraulic starting motor - Side discharge pipe with motorized outlet adjustment - 27" maximum log diameter - Many spare parts and knives included - Average production rate: 125 tons per hour - No hydraulic pump - No motor - an 800HP one can be added for additional cost though... The photo's show the optional extended shaft and hydraulic starting motor which is a special feature....

Precision 58” (6) Knife Chipper

Complete chip plant includes: - The infeed is 12’ above ground level. They were feeding it one log at a time with a shovel. - There is a single chain 12” wide leading to the debarker. - The debarker is a Salem 20” ring debarker with mcdiarmond controls. - From the debarker it goes through I think is a metal detector. It’s is enclosed, 8’ long with a belt conveyor. - 75’ of 3-strand chain that reduces to 2-strand chain for 35’ then goes to another 2-strand chain for 12’ then goes into the chipper. - The chipper is a Precision with 2- 400 hp high efficiency 3 phase motors. - From the chipper the chips drop onto a 42”x50’ inclined belt that leads to the 2 deck screen. The screen is 92”x20’ - The waste goes on a 9”x20’ incline belt and dropped into a truck. - The chips go out on a 3-strand 100’ conveyor (strands are 14” wide) to a radial stacker for loading trucks. The stacker belt is 42”x65’ - Chips can be redirected to blower unit system that will transport them to a rail siding to so they can be loaded into a rail area. It starts out with 75’ of 12” pipe running on the ground. Then it sweeps straight up to a height of about 24’ and goes 150’ to a siding across the county road. The chip loading facility is intact. - The hog is located back by where the logs are loaded onto the chain going to debarker. Here’s a list of the conveyors going back to the Kockums hog. It has a 24”x36” opening at the top. - Conveyors: 12”x100’, 12”x 25’, 12”x60’. All of these conveyors are 1 strand steel.

Progress 60" 6 Knife Drop Feed Chipper S/N 00-0026 Drop Chute with Top Discharge

Rotochopper MC256 3126B 300 Hp CAT Engine Dust Control 60 Teeth Roto902 8 row rotor 3/4 x 2 1/4 bolts 3 button remote-Elec Sol Model EL24VRT Drive Belt BL10/5V1600 Square D buttons on 3 button box 24 Volt System Radiator PreCleaner CAT radiator CAT Alternator 9X7803 Turbo II 68-6 intake S/N 87384 DT motors w/case drain Hyd Screen changer Hyd Valve Ass'y Hyd Actuator Hyd powerfeed shock kit Magnet Long Conveyor Pintle Hitch 3 15/16" FAG main rotor bearings Smooth underrotor belt R2 lacing 3/8" steel infeed belt 2 7/16" bearings and shaft on infeed Slab ramp w/blocks No flip down sides on infeed AW68 hyd oil Gruber Welding fuel & oil tank BEE70 omega coupler 3/4" baffled screen Will need to be moved on a trailer.

Soderhamn 48" Chipper M671 Diesel Engine Mounted on trailer

Soderhamn 48" 3 Knife Stationary chipper S/N 616

Stringer 66in 6K Chipper 150 HP Lincoln Electric Motor Precision 7ftx7ft Chip Screen & Cyclone Phelps Chip Blower 16inx33ft Flat belt Conveyor w/Electric Drive

Sumner 8 Knife Chipper

Drum Knife Chipper with 125HP Electric Motor

Never used PowerKing 14HP Tow-Behind Wood Chipper Shredder w/ Kohler Engine. Commercial Kohler Command Pro CH440 429cc, 4-Stroke Engine. Inhales Debris Up To 5.75" In Diameter. Call 800-459-2148 for more info.

60" dia, 4 Knives, top discharge, good working condition

Recently removed from service Available immediately