Dust Collection Systems For Sale

CAM-WOOD DC-8075 Dust Collector Radial-finned type impeller for the best efficiency with large 15-3/4" dia. fan that produces 5,800 CFM.Includes: -- Heavy Duty 7.5 HP motor pre-wired at 220 V. -- (4) Large top filter bags and (4) lower collection bags with 48 cu. ft.capacity. -- Standard steel spring clamps to secure bags without leakage.Features: -- Low sound level of 75 - 90 db. keeps the work area quiet. -- Optional connection for using barrels.

CAM-WOOD DC-8100X Dust Collector Radial-finned type impeller for the best efficiency with large 15-3/4" dia. fan that produces 7400 CFM.Includes: -- Heavy Duty 10 HP motor pre-wired at 220 V. -- 10" Inlet -- (4) Large top filter bags and (4) lower collection bags with 48 cu. ft.capacity. -- Standard steel spring clamps to secure bags without leakage.Features: -- Low sound level of 75 - 90 d.b. keeps the work area quiet. -- Optional connection for using collection barrels.Note: 220 or 460 Volt, 60 Cy, 3-Ph please advise.

CAM-WOOD DC-07 STA Cyclone Dust Collector w/ After-filtersNew designed two-stage cyclones. As the “dirty"; air stream enters the collector, the heavy particles are separated by cyclonic action and fall to the bottom storage bag. The remaining air stream with fine dust goes through the impeller, it can increase dramatically the life of the impeller & motor preventing damage from large material.Features: -- 7.5 HP blower with 4,200 CFM. -- Inlet Diameter 12" x 4" x 5. -- Heavy sheet metal frame and base. -- Extra-large radial-fin type steel impeller for high-efficiency airflow. -- Heavy duty totally enclosed industrial motor for maximum air suction and extended service life. -- Quick-release clamps are used to tighten the bags; this helps to reduce downtime when doing maintenance. -- Low sound levels to keep the working area quiet. -- Includes: (2) Collection drums

CAM-WOOD DC-10 STA Cyclone Dust Collector w/ After-filtersNew designed two-stage cyclones. As the “dirty"; air stream enters the collector, the heavy particles are separated by cyclonic action and fall to the bottom storage bag. Then the remaining air stream with fine dust goes through the impeller, it can increase dramatically the life of the impeller & motor preventing damage from large material.Features: -- 10 HP blower with 5,000 CFM. -- Inlet Diameter 13" x 4" x 5. -- Heavy sheet metal frame and base. -- Extra-large radial-fin type steel impeller for high-efficiency airflow. -- Heavy duty totally enclosed industrial motor for maximum air suction and extended service life. -- Quick-release clamps are used to tighten the bags; this helps to reduce downtime when doing maintenance. -- Low sound levels to keep the working area quiet. -- Includes: (2) Collection drums

CAM-WOOD DC-102-3 Dust CollectorSmall radial-finned Dust Collector mounted on wheels for portability.Features & Specifications: -- Large 13-1/2" fan that produces 2,100 CFM. -- Heavy Duty 3 HP motor pre-wired at 460 Volts. -- Large capacity dual station cloth top bags of 31.2 sq. ft. total cloth filter area. -- Low sound level of 75 - 90 dB.

CAM-WOOD DC-102 Dust CollectorSmall radial-finned Dust Collector mounted on wheels for portability.Features & Specifications: -- Large 13-1/2" fan that produces 2,100 CFM. -- Heavy Duty 3 HP motor pre-wired at 230 Volts. -- Large capacity dual station cloth top bags of 31.2 sq. ft. total cloth filter area. -- Low sound level of 75 - 90 dB.

CAROLINA BLOWER Size 80-6 Material Handling Fan with Motor. --Specification: -- Can handle approx 35,000 CFM @ 11" SP and 840 RPM. -- Comes with: Westinghouse Life-Line (high efficiency) 125 HP, 405T frame, ODP Motor complete with pulleys.. -- Motor is not mounted on base. -- Actual Model is 80-6SD.

Carolina Blower Dust Collector Dust Blower 19" Pipe 75HP Motor (Est)

CAROLINA BLOWER 45-6 Standard Duty Fan/Motor package assembled complete 30 HP motor. -- Rated at 8,860 CFM at 10" SP. Fan inlet diameter is 19". -- Fabricated with 3/8" thick wheel blades, 1/4" thick housing, primed and painted beige. 30 HP TEFC motor . Unitary base, V-belt drives, shaft and belt safety guards. -- This is an Industrial Material Handling fan with paddle-wheel construction. Also available in Heavy Duty version at extra cost, with thicker scroll-housing to handle airborne smaller solid wood or similar material.

Pneumafil – New Style 10’ ·· Pneumafil – Old Style 12’, 10’, 8’ ·· Torrit – 8’, 10’, 12’ ·· Carter Day – 10’ or can be cut to less ·· Airlanco – 10’ ·· Mac – 10’ MCF Style ·· Call for Availability

15 HP 6500 CFM 10” WC

MLS Number 12231702 2011 Clarke's Industries Bag House ? Explosion doors ? Abort gate at outfeed ? Abort gate at infeed ? Backdraft damper at infeed ? Spark detectors on infeed and outfeed lines ? Airlock ? Backdraft Damper on dust outfeed line ? Deluge System This baghouse is fed from a fan that has suction from Edger, 6”-10”-12”-20” Ukiah (chip/saw) and 20” sawbox. The sawdust from the discharge line under the airlock of the baghouse is sucked into Discharge blower (See Item#2). The dust outfeed line at the middle of baghouse, which discharges the dust fines during the cleaning cycle of bags, returns the fines to the baghouse fan. The Baghouse supplies air back into the building. This baghouse is fed from a fan with following specs: OEM & Model: Clarke’s Industries, Model MH-11, Serial 11OCWUBI3923 Driver: TECO 350 HP, 1785 RPM, 5009C Frame Motor Capacity: 66000 CFM Spark Detection Control System OEM/Model: Clarke’s Industries, Pyroguard CXC-2 Buyer responsible for dismantling.

CLEMCO CDF-8 Cartridge Dust CollectorSpecifications: -- Holds (16) cartridge filters. -- Includes New AirMax Premium Media Cartridge Filters – fire retardant. -- Total Filter Media Area: 4,032 ft². -- Air-To-Media Ratio @ 8,000 cfm: 2:1. -- Automatic Pulse Clean System with differential pressure gauge and sequencing control in enclosure. -- Single Hopper Outlet with Sealing Drum Cover Kit. -- Steel Support Structure. -- Includes: 20 HP Top Mount, Direct Drive Blower Rated for 8,000 CFM. -- Electrical Motor Starter & ControlsSold with Six Month Mechanical Warranty

7,000 Square feet of cloth Approx 70,000 CFM (2) 37" Positive Fans: 150 and 125 HP Ready to load on your truck!

Brand new System - IN STOCK! Coral FM 10 Ready Dust System 5,000 RPM 10 HP 230 or 480 V

New in the crate - Ready to ship! The ICON class dust system from Coral comes in 1-5 bag systems ranging from 1,400-3,800 CFM. - Easy installation! - Plug & Play setup - 3-10 HP Available!

In stock and ready to ship! ICON Pro Series from Coral - Integrated Fan - Easy installation - Plug and play! - 2900-3500 CFM - 5.5-7.5 HP

6 ft diameter stainless steel cyclone, Stainless 6ft dust cyclone 6ft diameter, dust inlet 17” x 16”, top outlet 32”, bottom outlet 20”, overall length 16ft, Inlet and or outlet may not be stainless, contact us for details. Price with shipping is available.

DANTHERM NFP 3H OPEN 9,000 CFM 20 HP Enclosureless Baghouse Dust CollectorSpecifications: -- Total filter area: 894 sq. ft.Equipped with: -- DANTHERM "S056-450-CW" 20 HP - 1,755 RPM TEFC Blower, with Inlet dia. 450 mm (17.72") & Outlet size 16" x 18". -- (48) Approx. 8" Dia. x 8' L "BEANE" media filter bags. -- Trough-style hopper base, with (6) 20" Dia. Discharge openings & Distance from opening to floor 42". -- Galvanized sheet steel frame. -- ALLEN-BRADLEY Switch box, with Push button controls.DE-INSTALLATION & SHIPPING PREPARATION NOTE: Dust Collector is currently palletized to ship and can be loaded from a dock or ground level. It was fully operational without any issues when removed from service and palletized in May 2024. Prior to palletizing, all bags were completely emptied.

DENRAY 7200 B DOWN DRAFT TABLELarge 48" x 72" Table. -- 3,900 CFM rating after filters. -- 5 HP Motor w/magnetic starter. -- Space-saving fully self-contained unit: No duct work, no loss of conditioned air. Contains (2) cartridge filters that clean to 0.5 microns. -- Comfortable working height 36". -- 1-1/8" Thick hardwood frame worktable with 3/4" thick MDF board and rubberized surface. -- "Self-Cleaning" System with push button start to force compressed air from a storage tank into the filters and force dust into the dust drawer. -- Floor level air exhaust which can be directed away from the operator. -- 84 dBA Sound level. -- Options include; Timer to automatically clean filters without operator, (4) swivel casters (2) that lock into place, noise reducing muffler (Reduces volume by 10 to 12 dBA),Unit also available in 220 V single-phase.