You Have Selected

  • Used
  • New

2485 Results Found for Sawmill Viewing 1 - 20 of 2485 results

Cardinal Circular Sawmill

Call for Price
COMPLETE SAW MILL CARDINAL - SWP complete semi-automatic saw mill consisting of 3-strand log in-feed chain deck; 2-strand chain seperator table; de-barker in-feed chain conveyor, MORBARK rosser head type 60 HP de-barker; c/w out-feed chain conveyor with hydraulic log tipper; 3-strand mill in-feed chain conveyor; CARNIDAL incline separator; CUT-CO 36"twin saw with twin overhead blades; cobination single cant twin slab carrier with manual refuse station; CARNIDAL incline slab de-scrambler; re-saw/grading in-feed roll conveyor; CARDNIAL 689C 42" slab re-saw automatic saw with MUDATA PLC control; 6-strand edger in-feed table; 7-strand re-saw out-feed table; CARDINAL 4-strand finished lumber out-feed table; CARDINAL incline de-scrambler; CANADIAN TRIM double end precision cut to length saw; 6-strand trim saw transfer table; waste/scrap recovery system. HAS THE CAPACITY TO SAW 40,000 BD FT OF 8 FT CEDAR IN 8 HOURS LOCATED IN ARTHURETTE, NB. COMPLETE SAW SHARPENING SYSTEMS INCLUDED. MILL COMES WITH 46 ACRES OF LAND.
Equipment Location:Moncton, NB
Graystone Quarries

Comact 8ft Lumber Stacker

Call for Price
Comact 8' Lumber Stacker
Equipment Location:Beaver, WA
LPS Equipment & Acquisition Co.
Cooper Machine has a New 2016 MIT True Lumber System available and in stock. This machine includes: - For logs 8-17' long and up to 36" in diameter - 17.5° stationary slant carriage has three reinforced steel knees, pneumatic dogs, motorized log rotators, board and sawdust conveyor, full hydraulic drive and three arms to assist in rotating logs on the car - Inclined double cut 17.5° movable headrig with 49 inch solid steel wheels, 6" band, high tension pneumatic system, mobile pressure guides, mechanized rails and winch for headrig movement with 30hp motor with electromagnetic brake frequency inverter - 6 x 6 climate controlled cab - Comes as a modular unit with 20' log infeed and substeel - Includes five days of startup with both a MIT and Cooper technician. This machine does not include any setworks, so you can use whichever system you want to. Setworks can be added at an additional price. This machine has a smaller footprint than a conventional carriage. The modular unit allows for lower installation and start up costs. Built heavy with a combined modular weight of over 90,000lbs. This machine is currently disassembled for shipping. It's priced ready to move. For more information, give us a call.
Equipment Location:Wadley, GA
Cooper Machine Company, Inc.
All new socks, new airlock and new air valve assembly kit. Works well. Will sell to first reasonable offer! Call or text: 612-875-4966 - Ben.
Equipment Location:Waconia, MN
Pine Products Inc
1. Edmiston vertical edger, $10,000.00 2. 36" Edmiston sawmill 4 H.B. with new computer setworks (T.I.C.) with log turner $18,000.00--$12,000.00 invested in setworks alone. 3. Edmiston 22" log deck, $6,000.00 4. 48" 3 Knife Precision Chipper with dual loading chutes $18,000.00 5. Cummings Genset 260 KW. 3 phase 6,000 hours solid and dependable. $15,000.00 6. 206 HMC Debarker with infeed deck $9,000.00 7. 41" green chain 3 strand with roof top chain and forward and reverse. $4,000.00 8. Frontline 36" belt conveyor $5,000.00 9. Mobark 17' vibrating conveyor $1,500.00 10. Screw conveyor to load open top containers $8,000.00 Everything is 3 phase, buy complete or separate everything is in good running condition, Motivated seller.... 570-437-2090
Equipment Location:Milton, PA

Fast Track Band Resaw

Call for Price
Fast Track resaw - uses 5" bandsaws, 20" x 20" capacity. Located in Kentucky.
Equipment Location:Portland, OR
Sawmill Pallet Machine
(2) Hurdle 3HB Sawmills, Lots of New Parts, Can been seen in Operation $30,000 each 270-459-0913
Equipment Location:Burkesville, KY
Stalcup Lumber
Used Mini Mill $14,500
Equipment Location:Aiken, SC
Hutto Wood Products
2010 Jackson 36D-10HL Shaving Mill, 8' box, (2) 10" diameter, 10 knife heads with 50hp electric motors, includes controls, starters and hydraulic pump unit, 40' long x 2 strand log deck; 23' long pan type belt conveyor and 40' long concave type belt conveyor, 64,000 FOB
Equipment Location:Brooklyn, CT
Sigfridson Wood Products
Used Linden double acting step feeder(s), Linden 4-36-50 log step feeder, serial# 98-1151 and 1152, 4 steps, 36" stroke, 50 degree angle, 25 hp electric motor belt driven to SM Cyclo reducer drive, approximately 4ft elevation gain, each box is 24" wide and is referred to "narrow box version" and has maximum contact on logs, 22 boxes wide, log length capacity 50ft, factory prints/drawings can be view in photos, Step feeder can be used as 2 individual 25ft long feeders and is priced at per 25ft section- 2 total section available - both run independently and has a electric motor and gear reducer for each section, estimated weight of each 25ft section is approximately 50,000 LBS or 100,000LBS for the total 50ft section. All information is from Linden MFG and we have a copy of the original drawings available, Step feeders are stored in our yard and ready for prompt shipment. Price includes loading onto truck, we can also quote you a delivered price to your location. YouTube videos of step feeder before it was dismantled: , , , ,
Equipment Location:Toledo, WA
Machinery Scene
Morgan 28' Big Mouth Log Trough w/ Diesel Self Contained Power Pack $5,000 740-244-6567
Equipment Location:Green Springs, OH
Jeremy Cole Logging
1992 Nicholson 104" Whole Tree Chipper, 10 Knife, Serial # N3052R 1250HP Motor with Starter and Infeed. The maximum log diameter which can be fed into the spout is 25”. The diameter of the shaft at the rear float bearing is 9-1/2". The last 12” of the shaft is tapered from 9-1/2” to 8-1/4”. Nicholson Chipper Line has been taken over by Kadant Carmanah Design.
Equipment Location:Forks, WA
LPS Equipment & Acquisition Co.
Equipment Location:Missoula, MT
Rawlings Manufacturing, Inc.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
1977 SALEM 7" GANG SAW Includes: 250HP MOTOR, all supporting motors, 7' INFEED ROLLERS, 8' OUTFEED BELT CONVEYOR 60" BELT, All electrical breakers, starters and ASKING $22,500 OBO or Trade. This is a good working industrial gang saw also known as a bull head edger. It quickly breaks down log cants into varied widths according to your needs. It has a 250 3 phase electric horse power motor along with 2 other motors which run the infeed and outfeed belts. It has been kept under cover and is in good condition. Serial number: S/N 77-71892 New this gang saw was built for a mill in Virginia for 200,000.00 and was later modified to cut 7" cants for turning rejected ties into boards. We would consider trades of equal value. The sale of the gang saw comes with: 23 extra 25.5 inch blades as well as the saw blades currently attached. and 2 electrical boxes with breakers, starters and switches. We do accept credit cards and cash. Randall's cell (325) 428-6695 Office (936) 858-2807
Equipment Location:Alto, TX
Custom Cut Lumber
Two (2) 40' long Tyrone hydraulic shotgun cylinders. Taken out of service 1/2/17. Replaced with two 50' cylinders. Cylinders are in good operating condition Total price - $15,000 FOB Wallingford, KY - Contact Carl Park
Equipment Location:Wallingford, KY
Mellott Manufacturing Co., Inc.
Equipment Location:Chelsea, AL
Abneyco Equipment LLC
COE Wood Drying Kiln used for veneer drying. Reeves Speed Control. Converted from steam heat to gas heat elements. Parts manuals, architectural footing drawings all included. Originally owned by Broyhill in NC. Was purchased from a working facility, disassembled and transported to it's new location, BUT was never assembled. All pieces are included from the assembled site. Price is negotiable. Selling because the business folded before it could be assembled. Site location has a forklift and truck dock and can assist in loading, but seller is not responsible for rigging or transporting.
Equipment Location:Valdosta, GA
A2D Solutions, LLC
2007 Woodmizer Anniversary Model LT40 Super-hydraulic; 25 HP Lincoln electric motor; set up on Woodmizer stationary legs; debarker; lube-mizer system; auto clutch; board return and table (never used). I am the original owner; the mill has always been set up stationary inside from new; I do have the complete trailer package; trailer kit LT40/70HD S Electric Brake and used only once to deliver to my location. This sawmill is in excellent condition; always maintained. Orange book value $23,200-26,800; replacement costs for this mill is $41,377; this mill is in excellent condition with very low hours. I am retiring from the wood business and need the space. I will install the trailer package upon purchase agreement for transport to buyers location.
Equipment Location:New Vineyard, ME
Appalachian Hardwoods, Inc.
2013 Wood-Mizer EG200 twin blade edger. Yanmar 21 HP diesel, 250 hours. 30' of extra bed rollers (16' in and 20' out), 2 board return rollers, no trailer package. $12,500.00 ($5,000 off of new price). Great deal! Wood-Mizer 24' extension. $3,750.00 Barely used. All manuals for each item. Selling due to back injury.
Equipment Location:Helena, MT
Woody's Lumber & Sawmill, LLC