- KOMATSU WA600-1L RUBBER TIRE LOG LOADER W/FORKS, TURBO DIESEL ENGINE, 65.35-33 TIRES
- PRENTICE HYDRO AX 180D
- NICHOLSON 27” 6-ARM RING DEBARKER
- PETERSON DDC-5000G FLAIR DEBARKER
- (2) BLACK CLAWSON 6’X12’ 2-DECK CHIP SCREEN
- BLACK CLAWSON 116” 6-KNIFE
- 2004 WESTERN PNUEMATICS
- JEFFREY 42X36B
- CAT D6C
- APPROX. 30" BLOWER W/50 HP MOTOR
- 32"X45" CHIP FEEDER W/MOTOR TO SHAFT MOUNTED REDUCER
- QNW ROTARY SCREW COMPRESSOR W/150 HP MOTOR, AIR COOLED, ATTACHED ELECTRICS
- Pneumatech AIR DRYER, HEAT REACTIVATED REGENERATIVE, 500 SCFM, 150 PSIG, TWIN TOWER
- ROY HANSON 650 GALLON AIR RECEIVER
- ALLEN BRADLEY 7-SECTION MCC W/(27) SWITCHES
- AUTO DIRECT/SPRECHER SCHUH PCS 300 HP SOFT START (HOG)
- ALLEN BRADLEY 5555 PLC W/(1) ETHERNET IP, (1) DH+R10, (1) DC INPUT MODULE W/ALLEN BRADLEY REMOTE I/O W/(14) MODULES
- ASSORTED MILL ELECTRICS W/(3) EMERSON UNIDRIVE FREQUENCY DRIVES; WESTINGHOUSE POW-R-LINE PRL-4 PANEL BOARD; ASSORTED STARTERS; DISCONNECTS; WIRE & CONDUIT LOT
- (2) APPROX. 30-UNIT HYDRAULIC OPERATED BINS W/20' GATES, HYDRAULIC UNIT
- WIG WAG SINGLE HOOD RAIL CAR LOADER W/RAIL WINCH, ELECTRICS
- APPROX. 20' 7-STRAND H-CHAIN TREE LENGTH INFEED LOG DECK (BARKERS), H-SHAFT, T-SPROCKETS, MOTOR TO REDUCER DRIVE
- 15' 8-STRAND H-CHAIN TREE LENGTH LOG DECK (BARKERS), S-DRIVE, MOTOR TO REX REDUCER DRIVE
-14' 10-STRAND H-CHAIN TREE LENGTH LOG DECK (CHIPPER), 8-ARM LS&L, EURODRIVE GEARHEAD MOTOR DRIVE
- 15' 7-STRAND H-CHAIN TREE LENGTH LOG DECK (BARKERS), MOTOR TO REDUCER DRIVE
- 24"X120' OUTFEED BELT LOG HAUL (FROM NICHOLSON) W/(5) KICKERS, MOTOR TO REDUCER DRIVE
- 24"X56' INFEED BELT LOG HAUL (TO NICHOLSON) W/MOTOR TO REDUCER DRIVE
- 18"X52' INFEED BELT LOG HAUL (TO FLAIL) W/GEARHEAD DRIVE
- 25' 6"X11-1/2" OUTFEED CHAIN LOG HAUL (FROM FLAIL) W/GEARHEAD DRIVE
- 75' 6"X11-1/2" OUTFEED CHAIN LOG HAUL (FROM FLAIL) W/GEARHEAD DRIVE
- EXCO 50' 15-ARM LOG STOP & LOADER W/SAS 20 HP HYDRAULIC UNIT
- CUSTOM BUILT APPROX. 48"X32' PORTABLE LOADING CONVEYOR, SINGLE AXLE TRAILER MOUNTED, HYDRAULIC DRIVEN W/SEPARATE SINGLE AXLE TRAILER MOUNTED PT DRIVEN HYDRAULIC UNIT
- APPROX. 36"X55' OUTFEED CHEVRON TROUGHING BELT CONVEYOR (FROM CHIPPER), MOTOR TO SHAFT MOUNTED REDUCER (APPROX. 40 HRS USE ON BELT)
- APPROX. 36"X45' OUTFEED CHEVRON TROUGHING BELT CONVEYOR (FROM CHIPPER), MOTOR TO REDUCER DRIVE
- APPROX. 75' 6"X11-1/2" BOX CHAIN W/FLITES CONVEYOR (TO HOG), EURODRIVE GEARHEAD DRIVE
- APPROX. 50' 6"X11-1/2" OUTFEED CONVEYOR (BARKERS), EURODRIVE GEARHEAD DRIVE
- APPROX. 36' 6"X11-1/2" OUTFEED CONVEYOR (BARKERS), EURODRIVE GEARHEAD DRIVE
- KOMATSU WA500-1L, RUBBER TIRE LOG LOADER W/MEDFORD FORKS (BLOWN ENGINE), 29.5-25 TIRES
- CAT D6C, CRAWLER TRACTOR, CAT TURBO DIESEL ENGINE, 12' PUSH BLADE, 20" SINGLE GROUSER TRACKS, HYSTER D6D WINCH
- INTL 1800 SINGLE AXLE FUEL TRUCK, DIESEL ENGINE, MANUAL TRANSMISSION, APPROX. 2,000 GALLON TANK
- PETERSON DDC-5000G PARTS MACHINE (WAS IN A FIRE) W/PRECISION HUSKY 66-23 CHIPPER, S/N: C-2634, CAT 3412 ENGINE (BLOWN), ASSORTED ACCESSORIES
- ASSORTED ATTACHMENTS TO INCLUDE (2) SETS OF KOMATSU WA500 FORKS; SLIP BUCKET; PUSH BLADE; LOG BUNKS; ASSORTED TIRES