2024 SMW MDL SH1400-600 Wood Grinder. Available in Diesel and Electric

SH 218D - SMW Diesel Drum Chipper - 31 1/2"dia Blade Roll, 650rpm, 2 21 1/2" T8 Blades. 1 21 1/2" T8 Bottom Blade, Feeding Inlet 12"-27", 8-9 T/hour, 19' 21" Feeding Conveyor, 32' 23" Outlet Conveyor, 200hp Motor, 4hp - 5.5hp Feeding Roll Motor, 4hp 6 Pole Outlet Motor, 2hp Oil Pump Motor. Also available in electric. Also Available: SH 218E - SMW Electric Drum Chipper - 31 1/2"dia Blade Roll, 650rpm, 2 21 1/2" T8 Blades. 1 21 1/2" T8 Bottom Blade, Feeding Inlet 12"-27", 8-9 T/hour, 19' 21" Feeding Conveyor, 32' 23" Outlet Conveyor, 147hp Motor, 4hp - 5.5hp Feeding Roll Motor, 4hp 6 Pole Outlet Motor, 2hp Oil Pump Motor.

2024 Sawmill World SH300 Air Defect Cut Off Saw with 13' Infeed Conveyor, 10' Outfeed Conveyor, 8" Processing Plank Width, 3" Processing Plank Thickness, 480V 7.5 HP Motor

SMW Multi Blade Rip Saw

SHBH500-2 - SMW Wood Shavings Machine - 2 Shafts, 8 Blades, Max Wood Size: 31 1/2"L x 19 1/2"W, Shaves 1/125"-1/64"D, 31 1/2"L Bucket, 1100lbs per hr, 14hp Motor, ~2100lbs. Also Available: SHBH500-4 - SMW Wood Shavings Machine - 4 Shafts, 16 Blades, Max Wood Size: 55"L x 19 1/2"W, Shaves 1/125"-1/64"D, 55"L Bucket, 2200lbs per hr, 31hp Motor, ~3950lbs. SHBH500-6 - SMW Wood Shavings Machine - 6 Shafts, 24 Blades, Max Wood Size: 55"L x 19 1/2"W, Shaves 1/125"-1/64"D, 55"L Bucket, 3600lbs per hr, 41hp Motor, ~4850lbs.

SMW Ultra Portable Horizontal Band Saw 26" cutting diameter, 10' cutting length, Max cutting thickness 19", Blade Size 12' 6" X 1 3/8", Machine length 13' 6", ~1100#, Packing Dimensions 7' 3" X 3' 3" X 5' 3". Available in 9hp Gas, 10hp Electric, or 8hp Diesel

TP-1700 - SMW Pallet Band Dismantlers - Table 55"W x 47"L, Cutting 1/4"-6"T, 23 1/2"dia Saw Wheel, Dismantles 40-60 Pallets per hr, 480 Volt 3 Phase 10HP Electric Motor, ~1985lbs.

ZHW800-70- SMW Gang Rip Saw - Saw from 3/8"-2 3/4"T x 31 1/2"W, 11"dia Saw Blade, 1-10 Blades, 29hp Motor. Also Available: ZHW800-80- SMW Gang Rip Saw - Saw from 3/8"-3 1/4"T x 31 1/2"W, 12"dia Saw Blade, 1-10 Blades, 40hp Motor. ZHW800-100- SMW Gang Rip Saw - Saw from 3/4"-4"T x 31 1/2"W, 14"dia Saw Blade, 1-10 Blades, 49hp Motor.

2024 SMW Wood Block Leg Automatic Assembly System

WPN-1 SMW Single Head Notcher - Processing Size 6'L x 6"W x 1 1/2"-2 3/8"T, Slot 1 3/4"D x 8"-12"W, 600-800 pieces per hour, Dimensions 48"L x 44"W x 48"D, 20hp Motor, ~880lbs.

SCHURMAN MDL 8 DAS 30 DBL ARBOR GANG EDGER; (2) 75HP MTRS

9' Sherman Transfer Deck, 16' wide with H78A roof top chain, gear reduction drive, 16' jump up roll case, (9) 24"x6" rolls

SCHURMAN SINGLE ARBOR GANG SAW 6" x 60"

Shurman 6SBA 42 S/N 1171 Gang Edger with 150Hp Motor

Schutte Hammer Mill Horizontal Infeed HZF40 w/100HP Electric Motor and Attached Blower

Schutte Hammer Mill 40-HZF with 100HP Electric Motor. No. 172 Attached Blower.

Schutte Hammer Mill #40 S/N 111375-R

Schutte Swing Hammer Grinder

1998 SCM TECH 30 Super Router

2014 SCMI ALFA 32C Beam Saw 230 Volt S/N AR3815