1994 John Deere 653E Processor, Machine has 19,500 Hours, New Deere installed at $15,000 Hours, Undercarriage is 65-70%, Enclosed Cab with Heat, AC doesn't work, Has some hydraulic leaks Has a Prentice PF48 Processor Head, Like a Fabtek Head. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1994 Deere 648E Grapple Skidder, Winch, Grapple upgraded to a 360 Degree Rotation, Direct Drive Transmission Good Engine 14,000 Hours, Good Turn Motor. Operating Weight 29,100lb Overall Length 24.12ft in Overall Width 10.21ft in Height To Top Of Cab 9.91ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1990 Mack 6x6 Log Truck Equipped with a Hood Log Loader and Rotobec Grapple, Wide Flotation Tires, New Brakes and Brake Chambers, Brand New Trinnion Stand, 13 Speed with High and Low Range, The Truck is Tight, Cab is a little rough. Good Running Truck Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Merlo P40. 17 Reach forklift with 308 hrs. Maximum lifting capacity of 8,800 pounds. It has a maximum lift height of 55' and a maximum reach of 41'. Load capacity at maximum lift height of 5,500 pounds and a load capacity at maximum forward reach of 1100 pounds. Operating Weight 22,928.1lb Length To Fork Face 19.02ft in Ground Clearance 1.58ft in Width Over Tires 7.88ft in Overall Height 8.24ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Merlo P32.6 Telehandler with 4,153 hours. Boom, side Shift, Boom Suspension, A/C. Weight 13,139.6lb Length 13.85ft in Width 6.57ft in Height 7.06ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Morbark M18R Drum Chipper, 200 HP John Deere with 4,900 hours, Hydraulic front jack and discharge chute, 5000lb winch, Manual rear outriggers. Gross weight: 11,000 lbs Length:21 ft 2 in Width:7 ft 7 in for single or tandem axle, 8 ft 5 in for single axle dual wheel Height:9 ft 6 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Morbark 40/36 Whole Tree Chipper, 600hp Deere with 8994 hours, A3 Drum, Light package, Remote, Rear stabilizers. Length 37'5" Height 12'4.25" Width 8'6" Weight 52,500 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1998 Morbark Mountain Goat 30/36,Whole Tree Chipper, has a Caterpillar 575 HP, 325 Undercarriage Which is 80-85%, Enclosed Cab with Heat and AC, New Updated Drum with 1.000 Hours, Morlift 250. Loader, Rebuilt Pumps, New Hydraulic Pump, Hydraulic Oil Cooler and Fan, Ready for the Woods. Length 31' 6" Height 12' 5.5" Width 8' 5.25", weight 36,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2024 Morbark 1821 Eeger Beaver Wood Chipper, 165hp Ford Gas Engine with 69 hours, Winch, Lift Cylinder, Hydraulic Turn Discharge, Like new with Warranty, Excellent condition. Weight 8,900 lbs Height 8'11" Width 7'3" Length 18'1" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Morbark M12R chipper, 12" capacity chipper, 89 HP GM gas engine, live hydraulic pump, auto feed, twin crusher cylinders, hand crank swivel discharge, excellent tires, new knives, fresh service, ONLY 410 hours! Gross Weight (approximate): 6,400 lbs Length: 13'9" Width: 6'3" Height: 8' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2011 Morbark 40/36 Drum Chipper 7400 hours. John Deere 600 HP engine , It has been through shop completely. Width: 8'6" Length: 37'5" Height: 12'4.25" Gross weight: 52,500 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Morbark 6600 Horzontal Grinder with 7,600 hours, Cat C-32 Engine, 1050hp, 5th Wheel, Radio Remote, Magnetic Head Pulley. Weight: 91,440 lbs. Length: 44'11" in transport Height: 13'6" in transport Width: 11'10" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2010 Morbark 6600 Horizontal Grinder, Cat C32 1200hp with 5,596 hours, Radio remote, Magnetic head pulley. Weight: 91,440 lbs. Length: 44'11" in transport Height: 13'6" in transport Width: 11'10" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Morbark 1300 Tub Grinder, Cat C27 1050hp with 7,400 hours, Air Compressor, Loader, Magnetic head pulley. Weight 88,000 lbs Height 13' 6" Width 11' 11" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2021 Morbark 223 Track Flail Debarker with 2,923 hours on a Cat C9 Engine. Length (transport) 33'5" Height (transport) 9'11" Width 9'10" Weight 46,700 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2009 Morbark 23NCL Whole Tree Chipper, Cat C27 800hp with 6,500 hours, 3 knife 3/4 chip, Radio Remote, Tether Remote. Length: 31'6" Height: 11'6" Width: 8'4" Weight: 36,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2021 Morbark 1821 Brush Chipper, Engine Ford 170HP Gas Engine, Hydraulic Winch, 2-1/2" Pintle Hitch, UCC Lighting, ONLY 187 Original HOURS , Ready for Work. Height 8'11" Width 7'3" Length 18'1" Gross weight (approximate) 8,900 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Morbark Model 4600XL Track Horizontal Grinder, Engine is a Caterpillar C-27 1050 HP Engine. Has 2,400 Hours of Running Time and 1,000 Hours Idling time, Undercarriage is 95%, Wireless Remote Control, Air Compressor, Metal Pully on Discharge Conveyor, Various Screen Sizes Ready to Work. Gross weight: 88,640 lbs. Length: 45” Height: 11’11” Width: 11’3” Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1998 Morbark 2400 Chipper, ONLY 1800 Original Hours, Perkins 185 HP Turbo Diesel Engine, Hydraulic Tongue Jack, Hydraulic Lift Assist Cylinder, Twin Disc SP 211 Clutch, Tires are at 50%, In Excellent Condition. Two Owner Machine, Ready for Work. Weight: 15,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.