2013 Caterpillar 289C2 Skid Steer with 3,268 hours. Cat C3.4T Engine with 73hp. Travel speed 8.5 mph, Tipping load 7,300 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 Caterpillar 289D Skid Steer with 2,651 hours. Cat C3.3B Engine with 72.9 HP. Max speed 7.1 Mph. Height - Top of Cab 7 ft Length - With Bucket on Ground 146.2 in Width Over Tracks 6.4 ft Operating Weight 10,533.7 lbs

Laminate door, guards, roof cooler, etc. Land management package without the saddle tanks. Power attachment plate. Heated seat….etc. Runs great. No issues. In the heat the hydraulic temperatures between 160-172 degrees constant. Runs cool. Everything works as it should. Tracks were replaced at around 600 hrs with the cat factory tracks. Operating Weight 11,756 lb Overall Length - Track 89.4 in Height - Top of Cab 83.6 in Ground Clearance 9.6 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Caterpillar 2P5000 Pneumatic Tire Forklift with 3,012 hours. Basic capacity 5,000 lbs. Length to Fork Face 100 in Width w/standard tires 45.5 in Height to Top of Overhead Guard 83.0 in Minimum turning radius (in/mm): 87.8 in Weight 7,990 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Cat 259D Skid Steer with 2584 hours, Heated seat, A/C and Heat. Back up camera, High flow, 2 speed, Hydraulic coupler. Work Ready. Operating Weight 8,946 lb Height To Top Of Cab 6.93 ft in Width 69 in Length With Bucket 11.44 ft in Length With Out Bucket 9.08 ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Caterpillar 259D3 Skid Steer, Engine is Non Def, 280 Original Hours, High Flow, Two Speed Drive, Hydraulic Coupler, Back Up Camera, Heated Seats, Bluetooth, Enclosed Cab with Heat and Air Conditioning, Block Heater, Factory Warranty until 11-19-2024 Compare New around $90,000.00 Length 12 ft 1 in Width 6 ft 5 in Height 6 ft 9 in Weight 8,987 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1991 Caterpillar 219D with 19" Saw Head, Engine has around 10,000 Hours, Enclosed Cab with Heat , No Air Conditioning, Undercarriage is at 60% Good Running Condition Ready for the woods... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Product Description 2003 Caterpillar 785 Off Highway Truck with 27,000 hours. Upgraded to C Engine. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 CBI 6800 Track Horizontal Grinder, 1000 hp Cat diesel, Radio Remote, Magnetic Head Pulley, Work ready. Weight 86,500lbs Transport length 43’2” Transport width 11’1” Transport height 12’ Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

!!!!! Price Reduced !!!!! 2016 CBI 6800 Horizontal Track Grinder, Engine has ONLY 4,100 Hours, Caterpillar C27 1050 HP Turbo Diesel Engine, Wireless Control, New Mill Recently Installed by the Factory and Also New Bearings on Shaft, Discharge Conveyor with Magnetic Head, Air Compressor, Serviced Every 250 Hours, Undercarriage is 75%, Work Ready. Weight 86,500lbs Transport length 43’2” Transport width 11’1” Transport height 12’ Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 CBI 5800 Horzontal Grinder with 728 hours on a Cat C-18 Engine with 675HP includes Colorizer and spray bar. Weight 69,000lbs - 73,000lbs Length: 38’ 11” Width: 8’ 4” Height: 12' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2020 CBI 5800BT, Cat C18 755HP with 2000 hours, Radio Remote, Magnetic head pulley. Weight: 69,000lbs - 73,000lb Width: 8’ 4” Length: 38’ 11” Height: 12' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1988 Clark Ranger 666 Grapple Skidder, Winch, Engine Hours are Unknown, Cummins Engine Overhauled 2 Years Ago, New Updated Transmission Tires are 30.5 x 32, Decent Tread, Center Section is Tight. Operating Weight 21,980 lb Overall Length 20.5 ft in Overall Width 9.25 ft in Height To Top Of Cab 10.38 ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 CMI C175 TWISTER II Forestry Mulcher with 1,935 hours. Equipped with a with FAE 140/U - 140 mulching head. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 CMI 300 Mulcher, Cat Engine with 1600 hrs. Good undercarriage, FAEmulching head… MACHINE Overall Length: 197 inches Ground Clearance: 19 inches Overall Height: 116 inches Overall Tractor Width: 89 inches MULCHER Overall Width Attachment: 107 inches Working Width: 89 inches Overall Height (pushbar fully retracted): 64 inches Total Weight (Crawler & Mulcher): 28,840 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 CMI 300 Mulcher, Cat Engine with 1600 hrs. Good undercarriage, FAE mulching head… MACHINE Overall Length: 197 inches Ground Clearance: 19 inches Overall Height: 116 inches Overall Tractor Width: 89 inches MULCHER Overall Width Attachment: 107 inches Working Width: 89 inches Overall Height (pushbar fully retracted): 64 inches Total Weight (Crawler & Mulcher): 28,840 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 CMI C450 Forestry Mulcher with 2,014 hours. Recent Work Done: Egr cooler A/c compressor Espar Fire suppression inspection LED lights Recent valve set Weight: 47,000 lbs Machine Length: 268 inches Height: 130 inches Width: 112 inches Mulcher Seppi Starforst 250 (Hydraulic Tilt) Overall Width Attachment: 111 inches Overall Height (pushbar fully retracted): 81 inches (206 cm) Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight

2021 Cord King Model 60 Firewood Processor, Deutz Diesel Engine with Only 466 Hours, Self Contained 16' Discharge Conveyor, Enclosed Cab with Heat, 27" Cutting Capacity, 58 Ton Splitter, Dual Drive4 Leg Live Deck,60 Carbide Teeth, Auto Clamping, Hydraulic Oil Cooler, (2) 16-way Hydraulic adjustable quick change box wedge (5 × 5) (4 × 4) piece for packaged firewood , 20 infeed with continuous chain drive feeding, -Overhead Log Grapple assist (Crooked Log), -Pintle Hitch. Tumble King debris separator, Hydraulic log stop (adjustable 12"-24" length) Ready for Work Weight: 16,000 lbs Transport Dimensions: 8’-6” wide, 12'-0" high Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Cord King Model 60 Firewood Processor, Includes a 40' Discharge Conveyor, Caterpillar Engine with Only 400 Hours, Enclosed Cab with Heat and Air Conditioning, Live Strand Deck, 8 Way Wedge, Ready for Work. Weight: 16,000 lbs Width 8' 6" Height 12' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2022 Cord King Model 44 HD 2030, Equipped with a Deutz 74 HP Diesel. ONLY 98 ORIGINAL HOURS,, 29" Cutting Capacity, Hydraulic Chuck Quick Change Box Wedge 16' Infeed, Hydraulic Log Stop, Auto Cycle ,Hydraulic Oil Cooler. Optional $2500.00 in Price, 5 Year Engine Warranty, Hydraulic Oil Cooler, 3 Leg Folding Live Deck, New Style Fold up Discharge Conveyor. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.