Wood-Mizer LT300 with enclosed cab and heat and air. 16' Log deck. Lumber Belt conveyor. Approx 50 new blades and 50 used blades. Manual/Parts book. Call 800-459-2148 for more info.

2006 Wood-Mizer LT40 Super Hydraulic - 51 HP CAT Engine - 6300 Hours - Debarker - Lube Mizer - Accuset 2 Setworks - Engine starts immediately - Recent Service - Engine Cover Call 800-459-2148 for more info.

This Wood-Mizer LT-70 Super Hydraulic Wide comes with a 55hp diesel engine with ONLY 60 hour on it! It has always been kept under cover and has been very well maintained by the Woodmizer dealer in Newnan, GA. This unit comes with the pedestal control station w/fully proportional joystick controls allowing the operator to be positioned anywhere to control all head & bed functions. It also has a de-barker, Lube-Mizer and 6 box of blades. This Sawmill is ready to go to work! Call 423-405-8280 for more info or to make an offer. [email protected]

Fully Hydraulic, Wide increases max width of cut to 34", Diesel engine with 1800 hours, Portable, Debarker (not connected), Lubemizer, Fine Adjust Legs, Remote Operating Station, Cap: 36” log diameter, 21’ log length, and production up to 675 bf/hr. Call 800-459-2148 for more info.

Year 2000, 2670 total hr. hours will probably go up yet, 38 hp Kohler gas engine, Only 1000 hr. since new, setworks, debarker, Lubmizer, 50 sharp blades, 4 gas tanks, Owners manuals for everything, Call 717-423-0010 for more info.

Wood-Mizer LT40 Hydraulic Band Sawmill, Portable, Debarker, Lubemizer, Serviced in November 2023, very little use, 2005, CAT Diesel Engine 37 HP, 991 hours. Call 800-459-2148 for more info.

2001 Wood Mizer LT40 Super Hydraulic, Wood Mizer LT40 Super Hydraulic with re-saw attachment with setworks, Replaced the hydraulic motor for the re-saw and replaced the guides. 25HP Electric Motor. Road ready. Can be switched to portable power - costs around $4000-$5000 from Wood-Mizer. Call 800-459-2148 for more info.

ENGINE - 22 HP Honda GX690 - 50.1 cutting hours SAW HEAD - Maximum log diameter / board width of 42 inches - 1 inch 1/4 last board cut capability - Blade of 203 x 1 1/2 APEX RF (10 blades included) - Electric Saw Head positioning and auto-lock electric winch of 4000 lbs mounted on a drum shaft with double cables of aeronautical quality?? - Hydraulic blade tensioner with pressure indicator - High grade triple bearing blade-guide, Zinc design and adapted for heavy usage, with 20 inch wheels - Large 7 gallons (26 liters) removable lubrification tank BASE - Up to 21 feet maximum board length, onto a 24 feet bed - Extra solid steel tubing frame 2X6 3/16, completely welded with crosspieces, no joints - 2 log clamp, simple one hand cam-lock design - 4 adjustable jacks and 5 stabilizing legs for maximum stability TOWING EQUIPMENT - 3000 lb suspension axels, alloy wheels, high quality tires and wheel fenders - Drawbar with 2 inches trailer tongue, and 3500 lb security chain - Integrated brake lights and turn signals Call 760-798-5410

Cook's HD-32 Manual Band Sawmill - 2022 Cook's HD-32 thin kerf sawmill package #3 - 25 HP Kohler engine with just over 1 hour on the mill - Cap 16' x 32" - 12 V loading winch with ramps - Trailer with spare tire - 12 V head up/down - Includes: 10 new super sharp blades, metal cant hook, blade alignment tool, stainless steel bunks, 10 new blades, 5 gallons on copper naphthenate concentrate for treating lumber, Solar trickle charger for winch - Mill can be towed distances with ease - Weighs approx 2500 # Call 800-459-2148 for more info.

Cook's 2019 AC 36 Fully Hydraulic Band Sawmill, 67 HP Yanmar Diesel, Computer Setworks, Debarker/Mudsaw, Remote Engine Shutdown and Throttle Control, Mega Guide System, 26" All Metal Bandwheels, Gearbox Head Raising System, Dual Axles with Brakes. 14" Split Strobe Saws, Trailer Package, Cat Claw Dual Tooth Setter, Cat Claw Sharpener, Mega Parts Package:? (60) Super Sharp™ Blades (4) Spare 2" Guides (10) Replacement Guide Bearings (2) Spare Drive Belt (2) Spare Pump Belt (2) Sharpener Grind Rocks (1) Metal 4ft. Cant Hook (1) Timberjack (1) Hand Set Checker (1) Blade Alignment Tool (1) Spare Tire 2019 Model 871 Hours on Saw - Has Bill of Sale Call 800-459-2148 for more info.

Cook's AC36, Fully Hydraulic, Perkins 400 C Series 65 HP Engine, Engine has been serviced with new filters. Starts easily and runs well, New fuel tank. New hydraulic tank. Hydraulic pump rebuilt. New idle wheel. Idle wheel tensioner replaced with all new factory parts Call 800-459-2148 for more info.

Keener Built Hydraulic Band Sawmill. COMPLETELY REBUILT and engineered with new gas powered deck. 25 HP Kohler gas engine. Cap 28" throat, 36" x 16'. Mill is operational and can be demonstrated. Original mill built between 1997 and 2003. Call 800-459-2148 for more info.

2008 Logmaster LM2 - Custom Built with one owner - 30 HP Kohler Gasoline Engine - Fully Hydraulic - Cap 12' x 28" - 19’1” (229-inch) Band saw Blade –One inch width - Ten gallon fuel tank - Always received regular maintenance Call 800-459-2148 for more info.

Lucas 6-18 Sawmill - Just like new with only about 2 hours - 18 HP Vanguard V-twin engine, with electric & manual start - Cap 20' x 6" on a single cut and 12” on a second cut. - Easy to assemble and transport. - Cuts true and fast - Comes three extra blades, tool kit, and all documentation and introduction DVD Call 800-459-2148 for more info.

2000 Polvson Wide Band Sawmill - Cap 36" x 25' - Isuzu 75 HP Diesel Engine with approx 1500 hours - Fully Hydraulic - No Set-works - Built in 3 blade edger on the machine that works but the belts are disconnected. 2 blades are moved hydraulically and one is manually adjusted. - Uses 21’6” long blades, 4-6” wide, 19 gauge, 1-3/4” tooth spacing - Armstrong No.2 bandsaw sharpener included - Includes 9 blades, 4" -6" wide and 7 Wood-Mizer new blades- 3" wide Call 800-459-2148 for more info.

2013 or 2014 TimberKing 1400 - Portable - 27 HP Kohler gas engine - Cap 32" x 20' - Hydraulic up and down - Clutch - 4 Retractable stops - Chain Log Turner - Winch Log Loader - Ramps - Taper Jack Call 800-459-2148 for more info. Price Reduced

Good-running, good-cutting Timbering 2200, Serial #xxx1171 originally shipped in October of 2017, Has 2,212 hours on its Tier 3 Kubota 48.9HP Diesel engine, The mill runs and cuts well, has new belts all around, new oil and filters, new hydraulic fluid and filters, a new debarker motor and new battery, Price on a new 22-series mill with debarker would be $85,890 with an eleven month lead time. Asking price on this mill $69,995.That means you save $15,895 off the new mill price...and get the mill right now! Also have 2 boxes of new blades. Call 800-459-2148 for more info.