931-797-6284
It is our goal at Kittrell Sawmill Brokers and Appraisers to bring the Forest Products Industry services with high standards of integrity; assisting them with an easy convenient way to stay connected to machinery for sale, to offer a means to sell machinery at private sale and at auction and offer appraisal services that will allow companies to remain diversified and competitive in today’s global wood products market.
Industry
Sawmill
62 Results Found
931-797-6284
$35,850
Chase Turbine Mfg. Co. Sawyer's Favorite hand set sawmill, immaculate condition (3 HB), wood & steel frame, 40' track, in track mount carriage drive drum & cable, 100 HP 220V head saw motor w/ WEG soft start MCC, include off bear belt on husk frame & outfeed belt conveyor, (1) w/ shaft mount reduction drive, 35' x 9 1/2' wide (4) strand infeed log deck w/ H-78 chain & HD reduction drive, (See Chase Edger under Edgers)ref #204, Contact Jackie 931-698-3342
$15,750
Chase (2) saw board edger, 30" wide w/ (1) movable saw w/ 40 HP motor 230/460 V 1765 RPM w/ HD spiked feed rolls, (2) inserted tooth saws, outfeed steel deck table w/ bar sweep to transfer board to discharge belt, (See Chase Sawmill under Circular Sawmill), ref #204, Contact Jackie Kittrell 931-698-3342
CM & E 60" HFBD 6 knife chipper (has broken pulley, but may have a possible replacement) (ref# 165) Call Amy for more information 928-723-9449
$50,000
PRICED REDUCED Cone 2-Saw Independent Arbor Optimized High Speed Edger, 4/4 to 4" runs 14 boards per minute W/ Tailing Device W/ Innovec Generation III Controls W/ Lots of Spare Boards & Parts to Keep Software Running, Includes MIC Unscrambler, with even ender up top. Scanning Bar and hi-speed indexible infeed and tailing belt outfield. On the ground and ready to load. Taken out with Videos and instructions to re-install. A must. Ref #131
Cook Accu Trac AC 36 Portable Band Sawmill. 4582 on diesel Power Unit has trailer Package. Located in Clarkrange, TN 38553 Call for video of sawmill running. Runs Great! Contact Zach Kittrell 931-224-0699 for more information. Seller moving, motivated to sell.
$4,000
$14,750
1999 Crosby 54” combination gang edger, S/N 10748, 6" thickness, includes position infeed table, 100 HP motor/ Coleman feed rolls, good sprocket & chains, (2) laser line lights, (1) movable saw on edger side, includes gang & board tailing belts 4" 6" and 8" spacers set up to 3 saws on Gang side. Smaller spacers will allow for more saws this machine is ready to load. seller will load on buyer's truck (ref# 200)
Edmiston Type #2 vertical edger w/ (2) moveable saws w/ 50 HP motor (ref #154) Call Logan 304-641-6640 Call for pictures
$40,000
Edmiston (4) head block carriage Model 36 w/ track & bumpers w/ Tyrone Berry SMA 225 hydraulic carriage drive & power unit, includes (2) saw hydraulic set vertical edger w/ saws, Silvatech setworks & saw cab - No husk frame... great to run with a band mill or we can find you a husk frame. (Price is loaded on buyer’s truck) (Ref #151) Call Amy Cross for more information. 928-723-9449
$89,500
Edmiston 48” (4) HB circular sawmill, tong dog, includes chain type log turner, 30 HP hydraulics for carriage & turner, mill cuts up to 24’, includes husk frame w/ top saw, 15’ slab dump conveyor, Tyrone 150 HP shot gun carriage drive (only 4 years old!) w/ Z-Set setworks or can use standard Edmiston setworks, Note: Seller's new mill will need to be onsite before taking this out. Seller will remove. (ref #181) Call Amy for more information (928) 723-9449
$39,950
Frick 4 HB hand set mill, air dogs, air tapers, handset, air receeder, lumber dial .56 circular saw, 213 Berry feed, Mellott #5 turner w/ pump tank controls, shop built (3) strand live deck, Mellott roll case w/ cant kicker, transfer to edger, Frick (2) saw edger w/ laser lights, Frick 2-saw DET w/ hydraulic set w/ cup conveyor for waste, mill will produce 8 to 12 M per shift in lumber and cants - Note: Frick won’t be ready for buyer pick up until mid-July. (REF #161) Call Amy (928) 723-9449
$2,000
Frick (2) saw edger w/ (1) movable blade, Ref #204, Contact 931-797-6284
Fulghum 48” (6) knife chipper, horizontal feed top discharge, chip breakers included to make bottom discharge if desired, spare knives included, also has sheath, ref#185, Contact Amy (928) 723-9449
$3,750
air exchange horizontal tank mount air compressor, (2) 15 HP dual compressor, Ref #204, Call 931-797-6284
Air compressor was used in food processing and is very clean, variable feed, 250 HP Seller will load on your truck, ref # 203, Call 931-797-6284 Motivated seller make a good offer
$60,000
April 2024 - Go Fast MET-20 multi-end trim saw 44 FLA, 10 HP blade motors, 1 1/2 HP feed through motor VFD, includes 12" waste conveyor & 1/2 HP material take away, belt conveyor 12", 20" carbide tip saws - 2060 chain, material spec 12' long x 12" wide x 4 1/2" thick, mounted motor controls, Ref #204, Contact Jackie Kittrell 931-698-3342
$4,900
2004 Grizzly pop up chop saw 24", S/N 24010 Model G0549, 15 HP 3 phase 220V/440V, cuts 8" thick x 21" wide material carbide tip 24" saw w/ machine, flex dust removal piping, Ref #204, Call 931-797-6284
$10,000
(1) approx. 24" 20 HP Hartzell high speed transfer fan, (1) 56" 150 HP collector fan (ref #173)
$40,000
Hemco double end trimmer w/ even end rolls, feed through chains & outfeed chains (trimmer can sell with stack and sort line upon request),ref#170, Call Amy for more information 928-723-9449 OBO
$150,000
Hemco Lumber Trim, Stack and Sort Line – (4) strand infeed w/ destacker and waterfall unscrambler board dealer to Hemco (9) station drop saw trimmer w/ controls and block conveyor, Hemco (11) bay lumber sorter w/ 75’ of haul out chain, includes hydraulic power packs, waterfall unscrambler to (4) chain arm stacker, 8’ wide, unground cylinder ground package hoist, stacking stick conveyor included, includes controllers & Dell PC View Sonic screen, Sullair LS-10 tank mount air compressor, Call Amy for more information 928-723-9449 OBO