931-797-6284
It is our goal at Kittrell Sawmill Brokers and Appraisers to bring the Forest Products Industry services with high standards of integrity; assisting them with an easy convenient way to stay connected to machinery for sale, to offer a means to sell machinery at private sale and at auction and offer appraisal services that will allow companies to remain diversified and competitive in today’s global wood products market.
Industry
Sawmill
62 Results Found
931-797-6284
$150,000
REDUCED! Hemco Lumber Trim, Stack and Sort Line – (4) strand infeed w/ destacker and waterfall unscrambler board dealer to Hemco (9) station drop saw trimmer w/ controls and block conveyor, Hemco (11) bay lumber sorter w/ 75’ of haul out chain, includes hydraulic power packs, waterfall unscrambler to (4) chain arm stacker, 8’ wide, unground cylinder ground package hoist, stacking stick conveyor included, includes controllers & Dell PC View Sonic screen, Sullair LS-10 tank mount air compressor, ref #170, Call Amy for more information 928-723-9449 OBO
$12,350
HMC 4800 horizontal resaw. This saw is made by Pinheiro for HMC, quality and speed 4" -5” band, includes electronic setworks, (no conveyors), excellent standalone machine, (ref #200)
Ingersoll Rand SSR II 50 HP screw type air compressor, believed to have 20,000 hours, Ingersoll Rand Model TS2A dryer 150 PSI Max refrigerant dryer (ref #174), 460V 3 phase, Approximate 220 CFM, Call Rachel for more information 931-797-6284
$27,500
TC54 John Deere Loader with 4' JRB Quick Couple Forks. (sn: DWTC54H570468) 26,344 hours. Well Maintained. Contact Zach: 931-224-0699
$63,000
Kiln Direct natural gas heat treating kiln 11'8" x 23 1/2' x 12' tall (outside dimensions) 2022 "Junior End Load" 6-cord, computer controls w/ HMI screen, info taken from Kiln Direct and deemed accurate but not guaranteed, Ref #204, Contact 931-797-6284 Subject to bank confirmation. Make us an offer.
$425,000
Lumber Breakdown, Dual Grading, Trim, Sort, and Stack System – 45’ (4) strand package deck w/ S-drive & H-78 chain, 6’ (4) arm breakdown hoist (hydraulic w/ HPU) w/ stick removal belt & stick stacker, dual grading stations as follows: (1) top (5) strand common shaft dual drive & (1) bottom w/ (5) strand decline table 20’ grading w/ operator control w/ 81X chain, both w/ operator control w/ 81X chain, Softac software & PLC VASKAWA57 VFD, Lucidyne label jet printer, MIC lumber trimmer w/ double paddle fence, MIC (28) bay bin sorter, (5) arm blade type lumber stacker & Sullivan Palatek air compressor (piston),Specifications: 386' long x 24' high, runs 6' - 16' L longer, thickness 1" - 4" thickness, width 6' wide packs, 3 1/2 - 22" wide packs, 3 1/2 - 22" wide, Loaded on your truck, all controls are in order ,this system was running December 1, 2023, ref #171 – For More Details Call for Complete Component System
$425,000
Lumber Breakdown, Dual Grading, Trim, Sort, and Stack System – 45’ (4) strand package deck w/ S-drive & H-78 chain, 6’ (4) arm breakdown hoist (hydraulic w/ HPU) w/ stick removal belt & stick stacker, dual grading stations as follows: (1) top (5) strand common shaft dual drive & (1) bottom w/ (5) strand decline table 20’ grading w/ operator control w/ 81X chain, both w/ operator control w/ 81X chain, Softac software & PLC VASKAWA57 VFD, Lucidyne label jet printer, MIC lumber trimmer w/ double paddle fence, MIC (28) bay bin sorter, (5) arm blade type lumber stacker & Sullivan Palatek air compressor (piston), All controls are in order, This system was running the first of December 2023, ref #171 – For More Details Call for Complete Component System you can run it now. Contact Jackie 931-698-3342
Uses Precision Parts Morbark 58", 3-knife chipper price is loaded on buyer's truck, (ref #151) Amy Cross 928-723-9449
$10,500
Newman KNO 24 lumber trimmer, (9) station drop saw, will pass rail tie’s, includes waste conveyor & infeed this saw is out and ready to load in your truck. Ref #188
$15,000
Newman Whitney KNO 24 trimmer, S/N 24120897, will pass a 5 1/2" cant, (9) station w/ individual motors, built-in wood waste block conveyor, used on dry line, good condition (ref# 200)
Call for Price
Northtech horizontal band resaw, (2) blades, will cut up to a 12 x 12" cant, powered by (2) 20 HP 460 Volt 3 Phase motors, runs (2) 1 1/4" band blades, Excellent Condition, (new condition with less than 4 hours use). Owner is retiring. Ref# 119, Contact Amy (928) 723-9449
$68,750
Precision P748H rosserhead debarker, 32’, 3 7/16" shaft, S/N D-577, debarker will debark logs up to 30’, includes (6) strand infeed deck w/ hydraulic motor/drive, includes Precision 65'barn sweep w/ incline, (ref #181) Call Rachel for more information 931-797-6284
$50,000
NEW PRICE!!!! Pro Grind 2000, 300 hp electric main drive, 50 hp hydraulic unit, 10' tub. al new hydraulic hoses, new hydraulic pump, 2 sets of screens (1" and 2") Located in Lake Park, GA Contact Josh for details 229-539-2678
$85,000
REDUCED - Reckart Machine Super band resaw system, 50 HP, 12" x 16" opening w/ motor control mounted, 41" wheels, saw guides, hydraulic feed, air setworks w/ air reserve tank, 18" wide roll case (heavy duty), 12' wide transfer decks (4) 81X chain w/ hook stop, hydraulic drives, infeed roll case 18" w/ (4) arm roller chain position wear plates w/ hydraulic power pack, 10" x 18" rolls on roll case, dust conveyor, paint is not even off wear plates (GEM in the dust!!) (Ref #154) Call Logan 304-641-6640 - surge deck available for an additional $5,000
Schutte horizontal hog, replaced shaft w/ blower & motor, heavy duty design (ref #162) Call Amy for more information (928) 723-9449
$11,000
16' x 17' x 32' overhead chip bin, includes cyclone on top of bin and HPU (buyer is responsible for all rigging and proof of insurance is required) (main 150 HP collector fan and 20 HP transfer fan available for additional $10k (ref #173)
$2,000
10' long x 18" wide x 4" deep incline belt conveyor good grip on belting w/ electric gear motor - 10' (2) strand transfer chain w/ bottom chain channels & H77 chain, motor to reduction drive, (2) arm speed up, slow down chain (All for $2,000), Ref #204, Contact 931-797-6284
$5,000
misc. HD roll cases 30" wide (1) w/ jump up section, (3) additional sections, (5) strand HD log deck, no drive (All for $5,000), ref #204, Contact 931-797-6284
$29,500
Grade Resaw 16” x 16”, set up very much like a West Plains, Heavy Duty W/ 44” x 5” Band Wheels, Dual Slat Feed Through Conveyor, Top Press Rolls Air, 75 HP Saw Motor, Includes 4’ x 4’ x 7’ Sawyer’s Cab W/ A/C, Complete Run Around System W/ Transfer Conveyors and Return Roll Cases, Includes Motor Control Cabinet W/ Variable Feed Drive, (22) Bands, Note: Seller has contact information for someone who will remove & load on truck, Ref # 187
REDUCED TO SELL!! Wood-Mizer LT-300 W/ Infeed log deck, outfeed incline belt LT300, 3-way outfeed conveyor, includes extra blades, 9,400 hours - Wood-Mizer 24 x 19 belt outfeed conveyor and electric drive, S/N 10004089A2.00 - Wood-Mizer TD2D12 3-way separator, S/N 1004027A1.00 - Wood-Mizer 25.5’ (2) strand log infeed deck w/ hydraulic stop & load & hydraulic drive Complete mill (ref # 162) Call Amy for more information (928) 723-9449