336-269-2284
WELCOME and thank you for visiting our website. Ligna Machinery has been meeting the needs of the Wood Products Industry for more than 50 years. We provide new, used and reconditioned machinery. Ligna Machinery is the exclusive USA representative for both MEBOR and JOCAR, European manufacturers of high quality and unique band mill equipment for both sawmills and pallet producers. Equipment located Biscoe, NC, mill site or factory. We broker machinery for other owners.
83 Results Found
336-269-2284
$1,200
SEW gear reducer: 121:1 ratio; 10 HP; UNUSED. Price $1,200.00. As-is/where-is. (Inv. # G-8).
SEW gear reducer: 100:1 ratio; 16 HP. Price $900.00. As-is/where-is. (Inv. # G-7).
$2,400
SODERHAMN 5' X 5' rotary screen with drive and screen plates. Offered as-is-/ where-is but loaded on your truck.
48" SODERHAMN/PRECISION chipper. HFVD; 6 knife; standard 14 3/4" knife length; pockets in good condition; 12" round discharge; 3 fan blades; 11" round wood capacity x 26" diagonal length.
Call for Price
ASSORTED MOTORS, IN ALL HP & SPEEDS AVAILABLE. Chipper and band mill motors 400HP, US, 585 RPM, DRIP, FRAME 1689S. TOSHIBA 200 HP at 1200 RPM. General Electric 300 HP, 514 RPM, 460 Volt for direct connect, Old style GE frame 17A's and 17B's to redesign up to 500 HP @ 450 RPM. 300HP ALLIS CHALMERS MOTOR 514 RPM, DRIP, 30KS8 FRAME. Many other sizes available CALL FOR YOUR SPECIFIC NEED. From 10HP to 600HP. See gear reducers with various HPs and ratios (see Gear Reducer listings).
TYRONE-BERRY Carriage feed, model 230 good condition with 125 HP motor on Hydraulic system and drum section. Drum has 20" x 20" face and grooved for 3/4" cable.
TYRONE-BERRY carriage feed, Model SMA 230, with 75 HP electric motor and drum package. Offered as/is where/is. Price $4,500.00
$26,500
UKIAH 8" x 66" wide gang saw. (8) 6" knurled and chromed bottom feed rolls, 2-15/16" shafts; (3) 8" knurled & chromed top feed rolls, 2-15/16" shafts, powered; 1-1/4" thick side plates; Rex ZBR type bearings; all sprockets in good condition; 3-15/16" outboard bearings and floored platform for drive; attached to main arbor by extra heavy duty universal joint system; door on right; drive system on left; clam-shell opening with both cylinders; (2) 10 HP motors for 2 speed drive system; approximate base size 9'6" x 12'6"; no infeed or outfeed or main electric motors. $26,500 OBO.
$26,500
UKIAH 8" x 66" wide gang saw. (8) 6" knurled and chromed bottom feed rolls, 2-15/16" shafts; (3) 8" knurled & chromed top feed rolls, 2-15/16" shafts, powered; 1-1/4" thick side plates; Rex ZBR type bearings; all sprockets in good condition; 3-15/16" outboard bearings and floored platform for drive; attached to main arbor by extra heavy duty universal joint system; door on right; drive system on left; clam-shell opening with both cylinders; (2) 10 HP motors for 2 speed drive system; approximate base size 9'6" x 12'6"; no infeed or outfeed or main electric motors. $26,500 OBO.
Board Dealer; 6 strand of 81X chain x 6' long; 6 hard surface tires for loading lumber; 6 primary lumber stops; 2 sets of secondary lumber stops.
$6,000
2 PLANER mill belts approximately 12' long x 18" wide belts: variable speed drives. One has adjustable legs. Heavy frames and in very good condition. As-is/where-is loaded on your truck.
$2,800
140' of used, heavy duty, #480 drag chain with wings. Rusty, but in real good condition--has been stored outside. 8" Pitch, ultimate strength 102,000 lbs., side bar height 2", overall width 14.5". Chain is in baskets. To be picked up in Biscoe, NC. Chain sold as is /where is. Price $20.00 per foot or $2,800.00 for all the chain.
Inclined lumber conveyor X 12' long; 6 strands of 81X chain with lugs, floored between strands.
$500
US gear reducer: variable speed; 5 HP. Price $500.00. As-is/where-is. (Inv. # G-14).
USNR Canter-Sawing Line consisting of: 60' double length infeed section; 10' log rotation section; (ASM sharp chain--NO longer available); 40' infeed section; 6' chipping canter section with 200 HP motors; 7'60" twin band sections with 150 HP motor; 25' outfeed with board off loading; 20' off-feed belt. Price includes removal cost (ready to load); all hydraulic power systems; all Square D motor control centers; Sub-operator's cab with controls included. 2001 model, only operated until 2007. Loaded onto your trucks $245,000 OBO.
Call for Price
9" x 54" wide. Center section ONLY. Clam shell design. 5" diameter spline. Three infeed & five outfeed rolls. Two speed "step" feed rolls. PAC-HOE guide system with 2" guides & THOMPSON guide grinder. (No hydraulic power unit). Two (2) 150 HP motors are included. As-is or can rebuild.
$8,500
250HP, 460VOLT, 1800RPM, EITHER 447T or 445T FRAME, TEFC, INVERTER DUTY, PREMIUM ENERGY EFFICIENT. This motor never ran on the equipment that it was mounded too.
Call for Price
NEW WEG soft starters, open style (for your enclosure), 460 volt. Many options available. Pricing Examples: 200 hp (255 amps) $2,065; 100 hp (130 amps) $ 1,140; 300 hp ( 365 amps) $ 2,380. Call for pricing for options and different HP's than above.
$8,500
.jpg?width=300&height=200&mode=pad)
WEIL-MCLAIN, MODEL 988, steam or hot water boiler. Used in school system approximately 7 years. Good condition. Price includes: 7 sections of cast-iron plates and enclosure with controls. #2 fuel oil fired burner. Technician who removed system and put in a different system available to discuss. Offered as-is, as removed from service. Price $8,500.00 OBO
WEIMA WOODWOLF Pallet Shredder. Vertically fed machine with large 42" x 96" opening. Rotor is 24" in diameter and is driven by a 40 HP electric motor. Extra heavy design allows for effective crushing of pallets, crates, boxes and other furniture waste as a primary prep machine. The Woodwolf can be placed over the top of a single-shaft shredder, which allows the broken pieces to fall directly into the secondary shredder hopper. Offered as-is/where is as removed from service. Operated only 4-5 years per owner. High quality German design and operation.