sn #9WM01329, Has a few small leaks, Lights do not work. A good strong machine. CALL 724-475-1149

3 Phase.Year Model 93-97, 3306 Cat engine. 3171 hr. Everything works as it should. In good condition. Here is what you Need. Call for info 918-752-8142

113 KW, 3 phase, 480 V, The engine is a year 2000. A New turbo the engine is a complete rebilt motor with no hr. after the rebilt. Call 440-313-8683

Grapple forks 73" wide overall, pin-on style, good working condition

Cat Bucket - 3.5 Yard Capacity - Fits TAG Hydra Multi-Coupler Call 800-459-2148 for more info.

CEMCO ‘SUPER HEAVY-DUTY’ SANDER 3 Head Sander with 3 Drums and an Extra Drum. Specs: Drum 1 - Hard Rubber Sands lumber, surface particle board, or MBK Takes 4-5/1000ths of surface w/ 80 Drum 2 - 65 lb, Soft - Custom For hardwood / veneers grip 100-120 grit #3 Hardware Takes 4/5000ths off Drum 3 - Smoothing Bar that is 4" wide. Contact is about 4" Takes 2 – 3/1000ths off - Comes with Spare Smoothing Bar - Drum 1 @ 75 HP and Drum 2 @ 50 HP motors can run @ 100 feet per minute - Was run at about 65 - Sealed Bearings - McGuire Bearings has them if needed - In & Out “Free Wheels” Belt Call 800-459-2148 for more info.

Cleereman 3 head-block, 141" knees, Model;36, SN; 115, air set-works, includes 56' of track-frame and cable drum, working condition

Cleereman 4 head block , Model 40, air over air setworks, includes cab/track-frame/ carriage drive and all controls, in good working condition

Cleereman 3 head-block, 36" carriage, Timber Tiger electric set-works, includes track/ drive/ 60" husk/ cab and all controls, in good working condition

SN: 36-307, MN: 36, 3 head block, air dogs, tapers, setworks, 16' long, 50" wide center to center wheels

Cleereman 3 head-block carriage, Silva-Tech computerized set-works, 48' long track/frame, incudes cab, drive, husk and all controls, good working condition

Cook's HD-32 Manual Band Sawmill - 2022 Cook's HD-32 thin kerf sawmill package #3 - 25 HP Kohler engine with just over 1 hour on the mill - Cap 16' x 32" - 12 V loading winch with ramps - Trailer with spare tire - 12 V head up/down - Includes: 10 new super sharp blades, metal cant hook, blade alignment tool, stainless steel bunks, 10 new blades, 5 gallons on copper naphthenate concentrate for treating lumber, Solar trickle charger for winch - Mill can be towed distances with ease - Weighs approx 2500 # Call 800-459-2148 for more info.

Cook's 2019 AC 36 Fully Hydraulic Band Sawmill, 67 HP Yanmar Diesel, Computer Setworks, Debarker/Mudsaw, Remote Engine Shutdown and Throttle Control, Mega Guide System, 26" All Metal Bandwheels, Gearbox Head Raising System, Dual Axles with Brakes. 14" Split Strobe Saws, Trailer Package, Cat Claw Dual Tooth Setter, Cat Claw Sharpener, Mega Parts Package:? (60) Super Sharp™ Blades (4) Spare 2" Guides (10) Replacement Guide Bearings (2) Spare Drive Belt (2) Spare Pump Belt (2) Sharpener Grind Rocks (1) Metal 4ft. Cant Hook (1) Timberjack (1) Hand Set Checker (1) Blade Alignment Tool (1) Spare Tire 2019 Model 871 Hours on Saw - Has Bill of Sale Call 800-459-2148 for more info.

Cook's AC36, Fully Hydraulic, Perkins 400 C Series 65 HP Engine, Engine has been serviced with new filters. Starts easily and runs well, New fuel tank. New hydraulic tank. Hydraulic pump rebuilt. New idle wheel. Idle wheel tensioner replaced with all new factory parts Call 800-459-2148 for more info.

Cooks edger, 6" thick x 36" wide capacity, 2 movable blades, set up for tailing belt, hyd drive, includes controls, tailing belt, dust auger under edger, nice condition and ready for production

Coollair Model SPL-CBY72N.1Exhaust / Intake Fans - 72" - 2 HP, Belt drive Industrial/Commercial Heavy Duty Panel Axial Exhaust Fan Estimated Dimensions 80" x 80" Each heavy duty all welded structural frame, heavy duty self aligning ball bearing pillow blocks, heavy duty V belt drive with cast iron sheaves, 8 Blades Baldor M3558T AC Motor 2HP 208-230/460V 1725 RPM 3 Phase Frame 145T 3PH 60Hz TEFC Belt Size (Qty 2) BX 88 GREENHOUSE FANS, ARGICULTURAL , WAREHOUSE , HEAVY DUTY , https://www.coolair.com/ Call 800-459-2148 for more info.

48" bar turner, very good condition

Corley gang edger, 8" capacity, includes infeed/outfeed, electric drive, THIS UNIT NEEDS TO BE REBUILT, CALL FOR OPTIONS!!

Corley double end trim saw, 8" thick capacity, electric drive, good working condition

Cornell 4" thick x 27" wide capacity, 1 stationary-1 movable blade, includes infeed, this edger is in good working condition