1996 Bell Ultra T Feller Buncher, Equipped with a 32" Dangle Head Saw, Tires are 28L x 26 at 80% New Chains, Engine is a Deutz 90 HP with 6000 Hours, New Celunoid for the Fuel Box, Back Up Camera, Saw Motor Rebuilt, Grapple Piston and New Motor for Saw, Has sprocket hook up for 3/4" or 404 Pitch Chain, Tires are 28L x 26 at 80% No tears or rips in the seat, Joystick Controls, Doors Shut and Latch, Fuel Cap Locks,Ready for the Woods. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Bobcat S630 Skid Steer Engine Gross Power 74hp Aspiration Turbocharged Operational Lift Arm Path Radius Fuel Capacity 24gal Max Speed 7.1mph Loader M2-Series Operating Load Rating 2,180lb Tipping Angle 4360 degrees Auxiliary Std Flow 23 gal/min Auxiliary High Flow 30.5 gal/min Operational Weight 7610lb Length With Bucket 1.14ft in Width Over Tires 6.01ft in Height To Top Of Cab 6.78ft in Wheelbase 3.78ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2011 BRON 700 Forestry Mulcher with 4229.3 hours New Engine, New Pumps, Rebuilt Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 Carlton SP7015 Stump Grinder with 1,400 hours. 66HP Kabota Diesel Engine, Blade, 4 x 4 with a trailer. Weight 3500 Lbs. Length 10’ 6” Height 52” Width 35” Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Case 1150 H Dozer, 6 Way Blade, Hydraulic Winch with or with out, 28" Pads Open Rops, Low hours, Ready for Work Weight 25,300 lb Length 16’2” Width 9’2” Height 9’6” Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1993 Caterpillar 518C Grapple Skidder, 13000 hours, 30.5 x32 Tires at 90% Enclosed Cab with Heat, Center Section is Good, Good Chains New Belts and Batteries, Ready for the Woods. Operating Weight 26,510.6lb Overall Length 18.25in Overall Width 8.67ft in Height To Top Of Cab 9.55ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Cat 259D Skid Steer with 2584 hours, Heated seat, A/C and Heat. Back up camera, High flow, 2 speed, Hydraulic coupler. Work Ready. Operating Weight 8,946 lb Height To Top Of Cab 6.93 ft in Width 69 in Length With Bucket 11.44 ft in Length With Out Bucket 9.08 ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Cat 315FL Excavator with 1,800 hours, Thumb, Blade, A/C & Heat, Loaded, Ready to work. Weight 36,340 lbs Length 26 ft 8 in Width 8 ft 6 in Height 9 ft 11 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2021 Caterpillar 950M Wheel Loader with 3,698 hours on Cat diesel engine. Rops, Enclosed Cab, A/C, AWD. 23.5 / 25 Firestone Tires with 80% tread remaining. Length 22.8 ft. Width 9.3 ft. Height 11.4 Weight 42,357 lb The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Caterpillar 522B Feller Buncher NEW UNDERCARRIAGE, Quadco 22B Hot Saw with 360 Degree Swivel head, Enclosed Cab with Heat and Air Conditioning, ONLY 6.500 Original Hours, NO DEF Ready for the Woods. Weight 67,040 lb Overall Length 28.34ft in Overall Width 10.5ft in Height To Top Of Cab 12.67ft in Ground Clearance 2.75in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 Caterpillar 289D Skid Steer with 2,651 hours. Cat C3.3B Engine with 72.9 HP. Max speed 7.1 Mph. Height - Top of Cab 7 ft Length - With Bucket on Ground 146.2 in Width Over Tracks 6.4 ft Operating Weight 10,533.7 lbs

2013 Caterpillar 289C2 Skid Steer with 3,268 hours. Cat C3.4T Engine with 73hp. Travel speed 8.5 mph, Tipping load 7,300 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2008 Caterpillar 525C Skidder, New Engine Installed by Caterpillar with 3000 Hours, Frame hours 9.500, Good Tires 30.5 x 32, Re Did the Rear End, Rotating Motor Grapple also, Enclosed Cab with Heat and AC, Good Centers, Winch, Ready for the Woods. Operating Weight 39,045 lb Overall Length 27.46in Overall Width 11.15ft in Height To Top Of Cab 10.45ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Caterpillar GP25N Pneumatic Tire Forklift with Cascade 25 Carton Clamp has 6,383 hours. Overhead guard and Load backrest. Lowered Ht. 84", Max Ht. 188". 80% tread remaining on tires. Lift Capacity is 450 lb w/ clamp, 5,000 lb w/o clamp. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Caterpillar 568LL Track Log Loader, Machine has NEW ENGINE at a cost of $60,000.00 with 500 Hours Installed by Caterpillar, 11,000 Frame Hours, Undercarriage 75%, Enclosed Cab with Heat and Air Conditioning, Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 Caterpillar 555D Grapple Skidder, No Winch. Engine Hours 12,800 Hours, Tires are 35.5 x 32 At 50-60% Tread, Currently Working Center Section is Good, Enclosed Cab with Heat and Air Conditioning, Ready for the Woods Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Laminate door, guards, roof cooler, etc. Land management package without the saddle tanks. Power attachment plate. Heated seat….etc. Runs great. No issues. In the heat the hydraulic temperatures between 160-172 degrees constant. Runs cool. Everything works as it should. Tracks were replaced at around 600 hrs with the cat factory tracks. Operating Weight 11,756 lb Overall Length - Track 89.4 in Height - Top of Cab 83.6 in Ground Clearance 9.6 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Cat 320 CFM with Propac Stroke Delimber, Engine and Pump rebuilt at 8,000 hrs, Woods Ready. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 Cat 521B Feller Buncher with 4559 hours... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2008 Caterpillar 535C Grapple Skidder, No Winch, Engine has 17,000 Hours, Engine Rebuilt at 12,000 Hours, Rear Wheel Seals Repacked, Enclosed Cab with Heat , More Pictures coming soon. Ready for the Woods. Operating Weight 39,780 lb Overall Length 25.02ft in Overall Width 11.15ft in Height To Top Of Cab 10.45ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.