2006 JLG G6-42A Stand-Up Reach Forklift with 4,093 hours. Max Lift Height 42ft in, Max Forward Reach 28.97ft in, Lift Capacity 6,600 lb. Operating Weight 20,399.4lb Length To Fork Face 17.72ft in Width Over Tires 7.91ft in Overall Height 7.81ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1994 Deere 648E Grapple Skidder, Winch, Grapple upgraded to a 360 Degree Rotation, Direct Drive Transmission Good Engine 14,000 Hours, Good Turn Motor. Operating Weight 29,100lb Overall Length 24.12ft in Overall Width 10.21ft in Height To Top Of Cab 9.91ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Deere 859M Feller Buncher, Includes a Deere 22" Hotsaw with 40 Degree Tilt, 3,900 Original Hours, One Owner Undercarriage is 75%, Enclosed Cab with Heat and Air Conditioning, Leveling Cab, Operating Weight 79,510 lb Base Carrier Length 16 ft 1 in Height Over Cab 12 ft 10 in Overall Width 10 ft 11 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1996 Deere 540E Cable Skidder with 18,500 Hours, No Heat and Ac in Cab, Center Section is Tight, Tires are 18.4 x 26 Chains around Ready for the Woods. Operating Weight 21,900 lb Overall Length 19.95 ft in Overall Width 9.16 ft in Height To Top Of Cab 9.88 ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 John Deere 450H Dozer with 850 original hours, A/C and Heat, 6 way blade, Ready to work. Weight 15,000 lbs Length 12 ft 9 in Width 1 ft 3 in Height 8 ft 5 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Deere 948L Dual Arch Skidder, Engine has ONLY 6000 Original Hours, Enclosed Cab with Heat and Air Conditioning, New Tire Chains around 35.5 Tires, Center Section is Tight. Operating Weight 49,418.9 lb Overall Length 333.4 in Overall Width 140.7 in Height Over Cab 136 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 John Deere 803MH Processor with 10,000 hrs, 622B Wartah Head with a 3/4 chain on the main saw and 404 chain on the top saw. Has the updated hydraulic pumps, Air ride seat, XM radio, Touch screen monitor, The head had the pins and bushings replaced, everything is nice and tight, It comes with a oregon sharpener and extra chains and bars. Operating Weight 66,888.3 lb Height Over Cab 135.04ft in Length Of Tracks 15.13ft in Width 10.76ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Deere 753G Feller Buncher Hours 14,000, 22" Head with 45% Lateral Tilt, Undercarriage around 35%, 24" Pads enclosed Cab with Heat and Air Conditioning, New Hydraulic Motor on Saw Head, Ready for the Woods Weight 52,995 lbs Length 25 ft 8 in Width 10 ft 4 in Height 11 ft 4 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 John Deere 85G Mini Excavator with 3,052 hours. Operating Weight 17,952.3 lb Overall Width 7.62ft in Transport Height - Maximum 8.83ft in Transport Length Mono Boom 20.9ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1996 John Deere 548G Grapple Skidder, Includes Winch, Engine has around 7000 Hours, Enclosed Cab with Heat, Tires are 28L x 26 (2) New Tires on Rear, Front Tires 55%, Ready for the Woods Operating Weight 21,740lb Overall Length 20.77ft in Overall Width 9.85ft in Height To Top Of Cab 9.88ft in Ground Clearance 1.69ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1994 John Deere 653E Processor, Machine has 19,500 Hours, New Deere installed at $15,000 Hours, Undercarriage is 65-70%, Enclosed Cab with Heat, AC doesn't work, Has some hydraulic leaks Has a Prentice PF48 Processor Head, Like a Fabtek Head. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Deere 703JH Harvester, with Waratah HTH622B head,14,020 frame hours. Main saw motor resealed July 2021, new computer on head December 2021, Main seal on motor done December 2021, All new bushings on grab arms April 2022, grab arm cylinders repacked 2022, New encoders on saw and diameter. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Morbark 6600 Track Horzontal Grinder, Cat C32 1200 hp with 10,022 hours, Radio Remote, Magnetic Head Pulley. Work done. 5/23 fan pump replaced $8000 6/22 poclain feedwheel motor replaced. $20,000 4/24 Fan bearing replaced. $2000 5/24 yoke cylinders rebuilt. $500 5/24 new belly belt and all new parts associated with except the pulley drum. Shaft, b-locs and bearings replaced. Also metal siding and skirt. $8-10,000 6/24 2 new turbos. $12,000 6/24 new fan motor and side load adapter. $6500 6/24 feedwheel bearing replaced. Possibly shaft. $1500 6/24 discharge bottom bearings replaced Work done to infeed floor. Belly belt motor rebuilt. 3 injectors have been replaced. 2 out of 3 wiring harnesses replaced. Rebuilt fan motor. Has newer grates. (2) 8” hex. (2) 7x16 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1994 Morbark Model 1200WCL Tub Grinder, Caterpillar 3412 Engine, hours unknown, Joystick Controls, Square Wear Plates, Enclosed Cab with Heat, Clutch replaced recently, 4" Screen and 2" Round Secondary Screens. Length 36 ft 0 in Width 11 ft 11 in Height 13 ft 6 in Weight 50,020 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Morbark Typhoon 20 Drum Chipper, John Deere 325hp with 5,000 hours, Winch, Hydraulic Jack, Hydraulic Turn Discharge. Weight: 4,500 LBS Length: 18' Width: 8' Height: 8'6” Weight: 9,000 Lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Morbark 4600XL Horzontal Track Grinder, Cat C27 with 7,500 hours, Magnetic Head Pulley, Radio Remote. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Morbark 6600 Wood Hog Horzontal Grinder, Cat C32 with 8400 hours, Parked it 6 months ago. It ran until it was parked. Remote works. Known issues: Needs muffler Needs pto O ring Under side of yoke needs to be cut out and new plate put in. It ran till the day they cut it off so I’m sure they can get it running fairly quick. Needs a good amount of welding work under the yoke and around the mill. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Morbark 6600 Horizontal Grinder, one owner. 91,440 lbs. Length: 44'11" in transport Height: 13'6" in transport Width: 11'10" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Morbark 30/36 Mountain Goat Track Whole Tree Chipper Caterpillar C-15 Engine 4,145 Hours, Auto Clutch Undercarriage 85% To 90%, Enclosed Cab with Heat and Air Conditioner, 1200 Log Grapple, Ready for the Woods. Length 31'6" Height 12'5.5" Width 8'5.25" Gross Weight 44,760 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2021 New Holland E57C Excavator ONLY 1013 Hours, Yanmar 66 HP Diesel Engine, Grading Blade, Undercarriage is 95%, Enclosed Cab with Heater, Air Conditioning and Radio, 2 Speed Drive, Hydraulic Thumb 76" Angle Backfill Blade, Camera, Mint Condition, Ready for Work. Weight 12,566 lb Transport length 19.65' Transport width 6.30' Transport height 8.37' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.