2012 Morbark 30/36 Mountain Goat Track Whole Tree Chipper Caterpillar C-15 Engine 4,145 Hours, Auto Clutch Undercarriage 85% To 90%, Enclosed Cab with Heat and Air Conditioner, 1200 Log Grapple, Ready for the Woods. Length 31'6" Height 12'5.5" Width 8'5.25" Gross Weight 44,760 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2021 New Holland E57C Excavator ONLY 1013 Hours, Yanmar 66 HP Diesel Engine, Grading Blade, Undercarriage is 95%, Enclosed Cab with Heater, Air Conditioning and Radio, 2 Speed Drive, Hydraulic Thumb 76" Angle Backfill Blade, Camera, Mint Condition, Ready for Work. Weight 12,566 lb Transport length 19.65' Transport width 6.30' Transport height 8.37' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 NYE HD Concrete pulverizer Solar 20CP47, Like new condition. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Eltec 227 Processor, Equipped with a Ponsse HAHD Processor Head, Undercarriage is a D-7 Caterpillar at 70%, Engine Cummins 9.2 with 6,600 Original Hours, Enclosed Cab with Heat and Air Conditioning, more pictures coming soon, Ready for the Woods. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Peterbilt Bucket Truck with 105’ bucket reach, 3,000 lb Jib, Rear mount, Work Ready. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2009 Peterson 4300 Whole Tree Chipper, Micro Chipper. 12 Knives on Chipper, Caterpillar C-18 765 HP, Engine Rebuilt with ONLY 1,000.00 Hours, 7,800 Frame Hours, (7) Sets of Extra Knives, Radio Remote Control with Extra Remote, New Tires, Brakes and Drum, PT Tech with ONLY Around 1,000 Hours Ago, New Starter, READY FOR WORK Weight 52,000 lbs Width 8’ 5” Length 35' 9" Height 12' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Product Description 2017 Peterson Pacific 2710D Horizontal Track Grinder, Caterpillar C-18 765 HP, Hours are 7,300, Wireless Remote with 25' Tether Control Cord, Discharge Conveyor has a Metal Pulley, Undercarriage is 90%, Ready for Work. Machine Weight: Approx. 68,100 lbs Width: 8' 2" Length: 40' 8" Height:11' 1" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Peterson Pacific 4700 Horizontal Grinder, Equipped with a Caterpillar 3410 860 HP Diesel Engine with 9000 Hours, Wireless Control, Rebuilt Infeed Chains, and Bearings on Mill, All New Teeth, New Backing Plates on the Mill, 5" Screens and New 1-1/2" Screens, Ready for Work. Machine Weight 62,500 to 67,000 lbs Travel Length 39'-8¾" Travel Width 9'-9½" Travel Height 12'-3½" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Peterson Pacific 2710D Track Horizontal Grinder, Caterpillar C-18 765 HP, Frame Hours 4,500.00, Caterpillar put in a new engine around 3,500 Hours, Dropped a Ring in the Engine, Has Platinum Engine Rebuilt, Undercarriage is 95%, Wireless Remote Control, Air Compressor, Ready for Work. Machine Weight: Approx. 68,100 lbs Width: 8' 2" Length: 40' 8" Height:11' 1" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

The 2710D is Peterson’s most portable and efficient grinder. 3-Stage Grinding Process Provides Faster Reduction Peterson’s powerful up-turn 3-stage grinding process provides better fracturing of material and a more consistent product, giving you just the product your buyers are looking for The Impact Release System Protects Your Investment Peterson’s patented Impact Release System’s air bags provides uniform grinding and protection from contaminated feedstock, a feature unique to Peterson grinders. The 2710D is designed for operations requiring high production and frequent moves between jobs. At 68,100 pounds (30,900 kg), it is amongst the lightest of our grinder series. The 2710D is powerful, with your choice of a Caterpillar C15 Tier IV, 580 horsepower (433 kW) engine, or an optional C18 Tier II, 765 horse-power (570 kW) engine. Heavy duty and mobile, the 2710D can readily reduce a wide range of materials. The 2710D's large feed opening can reduce a wide range of materials. Measuring 60¾ x 32 inches (153 x 81 cm), when boosted by Peterson’s high lift feed roll, the feed opening’s maximum lift of 44 inches (112 cm), is amongst the largest in its class. The 2710D features a large grate area that enables it to produce materials to exact specifications. Our quick-change multiple grate system makes it easy to customize grate configurations to produce a wide variety of finished materials. Grates are removed through an easy-access door on the side wall. Machine Weight: Approx. 68,100 lbs Width: 8' 2" Length: 40' 8" Height:11' 1" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Peterson Pacific 4300 Whole Tree Chipper, Micro Chipper, New Rebuilt Cat C-18 Engine, 785 HP, Under 50 Hours, Frame Hours 10,500 Hours, Air Compressor on the machine, Ready to Chip Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2002 Ponsse Caribou Double Bunk Forwarder, Mercedes Engine with around 18,000 Hours, Was run through Ponsse's Service Department several years ago, Enclosed Cab with Heat and AC, Center Section Good One Set of Tracks. Operating weight 12.8 t Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Ponsse Buffalo King Forwarder, Equipped with 2 Sets of Tracks, Leveling Crane, 11,400 Hours, Fire Suppression, Tires are 75% DEF Engine, Enclosed Cab with Heat and AC, Backup Camera, New Pump, Ready for the Woods Clean Machine Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Ponsse Wissent Double Bunk Forwarder, Mercedes Engine OM9O904LA with 9,500 Hours, K-70 Crane, Double Squirt Boom (30') Reach, Super Grip Grapple, Ponsse Opti Control, Easy Manouvering in the woods with X8710 x 26 Tires, Wabasto Pre-Heater, Enclosed Cab with Heat and AC, Air Ride Seat, 3 Speed Hydrostatic Transmission, High/ Low Range, All Parts and Service Manuals Ready for the Woods Length 29.7ft in Width Over Tires 9.32ft in Height To Top Of Crane 12.14ft in Ground Clearance 2.12ft in Length Of Bunk Area 14.77ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Ponsse Buffalo Forwarder, New Engine Only 500 Hours Mercedes Diesel Engine, Wabasto Heater, Enclosed Cab with Heat and Air Conditioning, Centers are Tight on the machine, New Bucket Steering Cylinder. Operating Weight - 8wd 35,053.5lb Length 36.91ft in Width Over Tires 9.72ft in Height To Top Of Crane 12.31ft in Ground Clearance 2.29ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2003 Ponsse Caribou Forwarder, Equipped with 18,000 Original Hours, Mercedes Engine, 12 Ton Double Bunk Forwarder, Enclosed Cab with Heat and Air, One Set of Tracks. 1 New set of chains, Replaced Hydraulic Pump last year, Ready for the Woods. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Ponsse Buffalo Forwarder, Equipped with a K90 Loader, Mercedes Engine with Only 5600 Hours, Enclosed Cab Heat, Air, Radio, 1 Set of Tracks, All Maintenace records, Synthetic Oil 80 AW Hydraulic Oil, Four Bunks, Slide in and out. Ready for the Woods. More pictures coming soon. Weight 46,297 lbs Length 36.91ft in Width Over Tires 9.72ft in Height To Top Of Crane 12.31ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Ponsse Wisent Double Bunk Forwarder, Machine has 10,200 Hours, Encllosed Cab with Heat and Air Conditioning, Center Section is Tight, Ready for The woods. Length 29.7 ft. Width 9.32 ft. Height 12.14 Weight 31,085 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Ponsse Ergo (8 Wheel) Processor Equipped with a Mercedes 270 HP Engine with 12,500 Hours, C-4 Crane, H7 Processor Head, Enclosed cab with Heat and AC, Wabasto Pre Heater, 710 Tires around,90% on Tracks, 1 set aggressive, other standard tracks, Good Diffs, Boggies and Drivebox, Fire Suppression, 30 Day Parts Warranty. Ready for the Woods..... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2011 Ponsse Ergo Processor, Includes a H-7 Head purchased from Ponsee, 13,500 Hours on Machine, Machine was refurbished with 3 pages of information, Good Center Section and Tires, Enclosed Cab with Heat and AC, Well Maintained, Tracks Front and Rear. Operating Weight 35,274 lb Shipping Length - Non Tilt 25.2 ft in Overall Width 9.32 ft in Height To Top Of Cab 12.37 ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.