Ben Jones Machinery
Ben Jones Machinery
 706-324-2604

We are the oldest and most trusted dealer of used sawmill and wood processing machinery in the eastern United States. We buy and sell used sawmill and lumber processing machinery with an emphasis on equipment suited for small to medium production operations.

Filtering

Reset All 

thru
 Used     New
Viewing Page 4 of 5
100 Results Found
Sort By 
Ben-Jones-Machinery
 706-324-2604
Rens Whole Log  Metal Detector
$30,000

Whole Log Metal Detector for logs up to 48" in diameter. Features heavy duty factory built conveyor 22' 8" long with "S" drive. Needs drive motor & reducer and new belt. LS 345 Controls included.

 Waverly Hall, GA
 706-324-2604

 Call
Salem 8 x 36 Guided  Gang Saw
$45,000

Thin kerf top arbor gang with infeed and outfeed. Features 300 HP arbor motor access door on left splined arbor guide lube system babbitt pot Salem double side guide milling machine lots of guides lots of saws soft starters control console Infeed features: 3 cross chains cant turner crowder roll

 Waverly Hall, GA
 706-324-2604

 Call
Salem 2-saw  Edger-Board
$30,000

Features 2 equidistant shifting saws ball bearing shifting collars Temposonic hydraulic linear positioned saws Knurled and chromed feed rolls blade access on left belt tailing device dead roll infeed Programmable push button controls and jog to position controls arbor motor hydraulic unit

 Waverly Hall, GA
 706-324-2604

 Call
Schutte-Buffalo Model 56-35 heavy duty horizontal hog  Hogs and Wood Grinders
$29,500

Schutte Pallet Hog - Model 56-35 heavy duty horizontal hog.   Features 50 inch wide horizontal feed  opening with top and bottom powered rolls; 50  2-way, reversible swinging hammers with hardsurfaced tips ; 250 HP direct drive electric motor; 3/4" thick screen with 1-3/8" diameter holes;    Rear discharge.   Electrical cabinets included.   Hammers are approximately 1-3/4" x 5" x 8".    Serial #0506071.

 Waverly Hall, GA
 706-324-2604

 Call
Schutte-Buffalo 250 HP  Hammer Mill
Call for Price

Top feed hammermill with 18" x 36" feed opening. Features 250 HP direct drive motor. 1800 rpm. 3/8" hammers. Includes Benshaw softstart with 500 amp breaker. Also includes separate blower with 50 HP motor and softstarter. Ideal machine for secondary grinding to produce a real fine output.

 Waverly Hall, GA
 706-324-2604

 Call
Stetson-Ross Feedtable  Planer
$10,500

STETSON ROSS Planer Feedtable - Model 503E pineapple feed table. Nice unit. Opens to 8" tall material.

 Waverly Hall, GA
 706-324-2604

 Call
Taylor LB Cap  Forklift
$20,500

Well maintained forklift; 8' forkls; Cummins diesel engine; side shift

 Waverly Hall, GA
 706-324-2604

 Call
Tigercat 625H  Brush Cutter and Land Clearing
$525,000

Less than 50 hrs. EHS, chains new condition.

 Waverly Hall, GA
 706-324-2604

 Call
Timberland Machinery 2014  Deduster
$23,000

Sidewinder Deduster

 Waverly Hall, GA
 706-324-2604

 Call
Timberland Machinery 2014  Notcher
$65,000

Timberland Notcher

 Waverly Hall, GA
 706-324-2604

 Call

Call for Price

Toshiba  Electrical
Call for Price

Toshiba 200 hp electric motor. 445T frame, 1775 rpm.

 Waverly Hall, GA
 706-324-2604

 Call
Unknown  Hydraulic Power Pack
Call for Price

15 HP Hydraulic Pump Unit Visit https://benjones.com/shop/101892/ for more information

 Waverly Hall, GA
 706-324-2604

 Call
Unknown  Hydraulic Power Pack
Call for Price

Complete Hydraulic Pump Unit with pump, motor, tank, and radiator. Visit https://benjones.com/shop/101890/ for more information

 Waverly Hall, GA
 706-324-2604

 Call
Unknown Peerless  Chip Bin
Call for Price

Peerless 126 Unit Chip Bin / Truck Loading Bin - capacity of 126 units.    Appears to be in very good condition. See all of our other items at benjones.com Call or Email for Price: (706) 324-2604 [email protected]

 Waverly Hall, GA
 706-324-2604

 Call
Unknown Tie  Conveyors-Live Roll
$37,500

Approximately 45' Long Live Roll Tie Sorting System. Features electric drive, 4 sets of kickers to same (RH) side, 2 air stops and one fixed stop. Very good condition with the exception of the gravity rolls. Gravity rolls should be replaced.

 Waverly Hall, GA
 706-324-2604

 Call
Unknown Morgan Small Log Cutup System  Circular Saw Husk
$45,000

Morgan Small Log Cutup System - 2 each 2 strand x 21' live log decks; saw unit with 60" inserted tooth hydraulic powered circle saw, 33' infeed log trough, log clamp, operator controls; 50 HP hydraulic pump unit.    This system appears to be capable of cutting 16" diameter and possibly even 18" diameter. See all of our other items at benjones.com Call or Email for Price: (706) 324-2604 [email protected]

 Waverly Hall, GA
 706-324-2604

 Call
Unknown Drag Chain Hopper Feed  Conveyor General
$9,000

Drag Chain Hopper Feed, Length 148", Width 80", Height 112" Motor and drive

 Waverly Hall, GA
 706-324-2604

 Call
Unknown PROGRESS 7  Chip Cyclone
$7,000

PROGRESS Chip Cyclone - 84" diameter with chip spreader and very tall support stand. See all of our other items at benjones.com Call or Email for Price: (706) 324-2604 [email protected]

 Waverly Hall, GA
 706-324-2604

 Call
Unknown PROGRESS 60  Chip Cyclone
$42,000

PROGRESS 60" Chipper - 6 knife, top discharge. See all of our other items at benjones.com Call or Email for Price: (706) 324-2604 [email protected]

 Waverly Hall, GA
 706-324-2604

 Call
Unknown  Chip Cyclone
$10,000

9' Tall Cyclone, Inlet 13" OD Pipe or 16" Flange. Outlet 17 1/2" ID

 Waverly Hall, GA
 706-324-2604

 Call
Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved