Ben Jones Machinery
Ben Jones Machinery
 706-324-2604

We are the oldest and most trusted dealer of used sawmill and wood processing machinery in the eastern United States. We buy and sell used sawmill and lumber processing machinery with an emphasis on equipment suited for small to medium production operations.

Filtering

Reset All 

thru
 Used     New
Viewing Page 5 of 5
100 Results Found
Sort By 
Ben-Jones-Machinery
 706-324-2604
Unknown End Dogging Scragg  Scragg Mill
$100,000

End Dogging Scragg 18FT Capacity. 52" blades, 150HP Motors, 18ft 4 strand Log Deck, 2 saw Edger

 Waverly Hall, GA
 706-324-2604

 Call
Unknown End Dogging Scragg 18FT Capacity. 52 bl  Slab Saw
$350,000

Cant Optimizer system consisting of: - Built in 1990 - 12" x 24" x 20 foot - USNR Cant Infeed positioning table - USNR Two (2) sided Model 85 canter module with eight (8) knife Key Knife heads,servo positioner and arbor motors (460/3/60) - USNR Profile module with single top and bottom drum style Key Knife profile heads per side with servo positioners and arbor motors (460/3/60) - 6 ft McDonough Twin Bandmill with slide base, servo setworks cylinder and 200 HP, 1200 RPM arbor motors (460/3/60) - Outfeed side board separator c/w center chainway, hold down rolls, cant kicker, spiral roll side board rollcase, pivoting end bumpers and drives - Operators cab and operator's console - PLC control system - Transverse Scanner c/w two (2) banks of seven (7) JoeScan heads - System hydraulic power unit

 Waverly Hall, GA
 706-324-2604

 Call
Unknown Chip-N-Saw  Slab Saw
$100,000

Used Chip-N-Saw for logs up to 18" butt diameter. Includes infeed, flying cant turner, canter.

 Waverly Hall, GA
 706-324-2604

 Call
Unknown KM-16 Trimmer Line  Trim Saw
$180,000

KM-16 HD line with infeed chain deck, Singulator and Auto dealer

 Waverly Hall, GA
 706-324-2604

 Call
Unknown PHL Bin Sorter, 50 sorts, 24 capacity  Lumber Sorter
$425,000

50 Bin Lumber Sorter, J-bar style, 24' capacity. Right hand. Includes lugged 90 degree turn (clockwise rotation). Down and ready to load.

 Waverly Hall, GA
 706-324-2604

 Call
Unknown Drag Chain Hopper Feed  Conveyor General
$9,000

Drag Chain Hopper Feed, Length 148", Width 80", Height 112" Motor and drive

 Waverly Hall, GA
 706-324-2604

 Call
Unknown AMERICAN  Dry Kiln
$120,000

AMERICAN WOOD DRYER KILN - 2 chamber package type dry kiln. New 1994. Very good condition. Requires low pressure steam (15 psi). 5 VFD controlled fans. Includes controls and boiler room and Boiler . Capacity approximately 50,000 board feet of 4/4 per chamber for a total of 100 MBF. Each Chamber and Boiler room is 36' Long x 20' High x 32' Deep, Rigging Not included.

 Waverly Hall, GA
 706-324-2604

 Call
Unknown  Trim Saw
$22,000

Sawmill Trimmer - 9 saw, drop saw trimmer, left hand, line shaft design, PLC control, waste conveyor, decline chain deck.

 Waverly Hall, GA
 706-324-2604

 Call
Unknown  Chip Cyclone
$10,000

9' Tall Cyclone, Inlet 13" OD Pipe or 16" Flange. Outlet 17 1/2" ID

 Waverly Hall, GA
 706-324-2604

 Call
Unknown Tie  Conveyors-Live Roll
$37,500

Approximately 45' Long Live Roll Tie Sorting System. Features electric drive, 4 sets of kickers to same (RH) side, 2 air stops and one fixed stop. Very good condition with the exception of the gravity rolls. Gravity rolls should be replaced.

 Waverly Hall, GA
 706-324-2604

 Call
Unknown Slab Drop  Conveyors Belt
$17,000

Slab Drop Belt, 24" x 12' long. Electric drive, air actuated.

 Waverly Hall, GA
 706-324-2604

 Call
Unknown 147 long x 6 strand  Conveyor Deck (Log Lumber)
$65,000

Very nice, heavy duty green chain. Approximately 14' wide x 147' long with electric drive. 81XH chain on I-beam chain races.

 Waverly Hall, GA
 706-324-2604

 Call
Viking Eng & Dev Sentinel  Pallet Nailer and Assembly System
$17,900

Viking Sentinel Pallet Nailer w/Stacker. Good working condition. Ready to go.

 Waverly Hall, GA
 706-324-2604

 Call
Williams Pulverizer Horizontal  Hogs and Wood Grinders
$15,000

Williams Horizontal 200 HP Grinder, 16 Ft vibrating Conveyor

 Waverly Hall, GA
 706-324-2604

 Call
Wood-Mizer  Resaw-Circular
$25,000

Wood Mizer 4 head resaw with run-a-round , needs some chain and cylinders put back on it, cuts 6" wide

 Waverly Hall, GA
 706-324-2604

 Call
Wood-Mizer 2017 6 Head  Resaw-Band
$100,000

6 Head Resaw with Auto Run-A-Round

 Waverly Hall, GA
 706-324-2604

 Call
Woods Model 412  Planer
$25,000

WOODS Planer-Matcher - Model 412 motorized, heavy duty planer-matcher with 6 heads. Ideal machine for surfacing dimension lumber or specialty products such as siding and flooring. 6" x 14" capacity, 8 knife heads; 50 hp top, 25 hp bottom, 20 hp sides; 20 hp bottom profile, 15 hp top profile. Item 32203.

 Waverly Hall, GA
 706-324-2604

 Call
Wright DS-3 Automatic Dual Side  Hogs and Wood Grinders
$19,500

Automatic dual side grinder for carbide tipped circle saws. 480 V 3 phase.

 Waverly Hall, GA
 706-324-2604

 Call
Yamani Band  Resaw-Band
$8,500

YAMANI Band Resaw - 1997 model SF800 vertical band resaw with adjustable fence and powered feed rolls. Built in blower to remove sawdust. Numerous bands included.

 Waverly Hall, GA
 706-324-2604

 Call
Yates A95  Planer
$93,000

YATES AMERICAN A95 Planer Matcher - 20 knife machine. Features fabricated frame with 100 HP top head, 75 HP bottom head, setworks for top head and left side head, hydraulic powered feed rolls, removable heads on all spindles, dynamic press roll tensioning, PLC control, chromed and water cooled beds, electronic cutter head brakes, high capacity hydraulic pump unit, operators console, side head setup stand, spare top and bottom heads, motor control center.

 Waverly Hall, GA
 706-324-2604

 Call
Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved