Equipment For Sale

1241 mm (48.8 in) Dual Bale Tines with IT Interface Rate Capacity (2,204 lb) Used for lifting and stacking of hay and straw bales.

#134 • Caterpillar Forklift -- Specifications -- Year: unknown. Make: Caterpillar. Model: GC45K-SWR. Serial #: AT87A00367. Engine: unknown 4.3 liter. Fuel: LP. Load Capacity: 10,000 lbs. Mast Height: 98”. Meter Reads: 12,160. Reach Height: 17’. -- Features -- Fork Positioner: no. ROPS: Open. Side Shift: yes. Stage Mast: 3. Tire Size: front22x9x16. rear-13x7x12 1/8. Tires: Solid. -- Seller Statement -- Sells with extra set of 6’ forks, no propane tank

CAT G126 Contractors Grapple FOR USE WITH: "CB" Linkage FOR USE WITH: PIN ON OR PIN GRABBER COUPLER Online Owner's Manual

CATERPILLAR CB LINKAGE BRACKET INSTALLED PART NUMBER 253-7830 CATERPILLAR GSH324 WH GRAPPLE CATERPILLAR PART NUMBER 587-8986 INCLUDES CONNECTING LINES INCLUDES MOUNTING PINS INCLUDES WASTE HANDLING SHELLS SOLD AS IS

CATERPILLAR 315D LINKAGE (315D-317) CONNECTING LINES INCLUDED GOTENE UFO AB S70 COUPLER MOUNTING PINS INCLUDED MOUNTING PINS INCLUDED ROTOTILT S70 COUPLER S70 LINKAGE SOLD AS IS

52 inch opening, 2762 lbs, 360 rotation

52 inch opening, 2762 lbs, 360 rotation

FUSION INTERFACE INCLUDE: MILLYARD TOP CLAMP AND CONNECTOR LINES FROM COUPLER TO THE TOOL. LOG & LUMBER FORK 72" Online Owner's Manual REQUIRES:3RD VALVE,CONNECTOR LINES FROM MACHINE TO MACHINE TO COUPLER

New Sets of 28” Single Grouser Pads for Timbco 445

GRYB CB LINKAGE TO DB LINKAGE PIN GRAB COUPLER INCLUDES MOUNTING PINS INCUDES ITEMS NEEDED FOR INSTALLATION SOLD AS IS

1.00 CUBIC YARD CAPACITY 4 TINES 90mm pin 386MM spread CATERPILLAR GSH425 ORANGE PEEL GRAPPLE Includes Crosshead bracket for MH3250 and lines

2.0 CYD CAPACITY CATERPILLAR GSH425 ORANGE PEEL GRAPPLE CATERPILLAR PART NUMBER 469-1368 CONNECTING LINES INCLUDED MH3250 CROSSHEAD INSTALLED MOUNTING PIN INSTALLED SOLD AS IS

1.5 CYD CAPACITY 4 TINES CATERPILLAR GSH440 GRAPPLE CATERPILLAR PART NUMBER 456-2267 DOES NOT INCLUDE MOUNTING PINS INCLUDES CONNECTING LINES MH3040 CROSSHEAD PART NUMBER 469-3646 INSTALLED SOLD AS IS TINE REPAIRS HAVE BEEN MADE

Cat V120 Forklift 12k lb capacity 18,700 lb operating weight Gasoline engine Enclosed cab All 6 tires are good Needs brakes Has small hydraulic leak underneath Runs and lifts

2007 caterpillar CP-563E pad foot compactor open canopy top. 4,101 hrs. $55,000.... Call eddie at 931-seven 04-7852

2000 caterpillar CP563D roller compactor open canopy top $45,000.... Call eddie at 931-seven 04-7852

AIR CONDITIONER CAB, ROPS/FOPS CB10 VIBRATORY COMPACTOR DRUM, SOLID ENGINE, EPA FLEX EROPS LIGHTS, ROADING AND WORKING MATS, COCOA Online Owner's Manual STEERING WHEEL, FIXED SYSTEM, VERSA-VIBE

Beacon Emissions Level - EPA - EPA TIER 4f Emissions Level - Japan - STEP 4 FINAL Lighting Online Owner's Manual Regulatory Marking Regulatory Status - CAT_Korea Regulatory Status - CAT_NR_EPA/CARB_MLIT_R120_R96_China Exp_EU Exp ROPS - Open Ultra Low Sulfur Diesel Fuel

1.00 CYD CAPACITY CATERPILLAR 60" DITCH CLEANING BUCKET CATERPILLAR PART NUMBER 514-7639 COMPATIBLE WITH: WAINROY XLS SYSTEM COUPLERS FOR USE WITH: Pin Lock Coupler 619-9328, 619-9323 or 512-7119 INCLUDES BOLT ON CUTTING EDGE PIN LOCK LINKAGE SOLD AS IS

CATERPILLAR PART NUMBER 514-9167 CATERPILLAR PIN LOCK TILTING COUPLER COMPATIBLE WITH: WAINROY XLS SYSTEM BUCKETS Connecting Lines and Mounting Pins Not Included FOR USE WITH: 315-Linkage Machine & 514-763x and Higher P/N Pin Lock Buckets FOR USE WITH: 315-Linkage Machine & 514-763x and Higher REQUIRES: Auxilary Hydraulics SOLD AS IS