Equipment For Sale

MDI 38" x 5' Fiberglass Section with Sensor & Electronics Box CCW65

MDI Metal Detector Nolco fiberglass section 6' x 14"

MDI Metal Detector 19" x 65" Appears new or lightly used

New MDI Metal Detector System – XR5000-X Series, Model XR-24-X with CR-85 5000 control chasis in an MDI NEMA standard enclosure. Features XR-10 digital technology and shielded search coil with 24? scanning width for vibrating conveyor installation. Includes 50' search coil lead wire and instruction manual.

MDI metal detector, built for planer, includes all controls, LIKE NEW CONDITION!

MDI whole log metal detector, capacity is 30" wide x 28" tall, includes controls, very good condition

MDI Mdl CR85 Metal Detector w/Search Coil & Chassis S/N 0909

MDI 48" Ring Metal Detector Model CR85, 26"x10' Fiberglass Section

MDI Metal Detector Mdl CCW-75 w/Search Coil & Chassis S/N 8985

MDI Metal Detector and control box.

Complete whole log metal detector with conveyor, coil and controls. Handles logs up to 30" diameter.

ME.SA M21 BORING MACHINE21-Spindle boring head on 32 mm centers, drills vertically from bottom up and head rotates to horizontal position for edge boring, head rotation is manual tilting with assistance from a strut.Specifications: -- 2-3/4" Max. drilling depth, 2 HP - 2,800 RPM motor, pneumatic drill head advance with speed control; head height adjustment with mechanical digital readout; 34" x 20" table size, max. workpiece width 31-1/2". -- Equipped with: Left & right side fences with stops for mirror-image fence setting for right- & left-hand boring, (2) pneumatic holddown clamps, pneumatic foot pedal control, and magnetic starter with overload protection.

ME.SA M21 BORING MACHINE21-Spindle boring head on 32 mm centers, drills vertically from bottom up and head rotates to horizontal position for edge boring, head rotation is manual tilting with assistance from a strut. -- 2-3/4" Max. drilling depth, 2 HP - 2,800 RPM motor, pneumatic drill head advance with speed control; head height adjustment with mechanical digital readout; 34" x 20" table size, max. workpiece width 31-1/2". -- Equipped with: Left & right side fences with stops for mirror-image fence setting for right- & left-hand boring, (2) pneumatic holddown clamps, pneumatic foot pedal control, and magnetic starter with overload protection.

(2) each 21-Spindle boring heads on 32 mm centers, drills vertically from bottom up. -- 2 HP - 2,800 RPM motor, pneumatic drill head advance with speed control; head height adjustment with mechanical digital readout. -- 5-1/4" (135 mm) Min. and 32" (815 mm) Max. distance between boring units. 3" (85/78 mm) Max. drilling depth. -- Equipped with: Left side fence with stops, (2) pneumatic holddown clamps, pneumatic foot pedal control, and magnetic starter with overload protection. -- Includes all 5 mm bits and chucks for 42 spindles as well as pneumatic alignment for long panels. -- Net weight 1,100 Lbs.

For sale, one (1) reconditioned Meadows grits separator, bottom discharge. This unit is belt driven by a 3 HP 3 phase electric motor. Magnetic motor starter available for additional cost. You can pick up the grits separator in North Wilkesboro, NC or we can arrange for its shipment. If you’re interested please call 1-800-626-2282.

MEADOWS MILLS 100H CHAIN LOG TURNER -- Hydraulic Cylinders: One 2" x 12" with 1 1/2" rod -- Turning Chain: #100 chain with 3/4" dog width and 13 bits -- Drive: H60TB13 sprocket with bushing, H60SDS25 sprocket with bushing, #60 drive chain, and chain guard -- Drive Shaft: 1 11/16" diameter 1018 cold roll -- Idler Shaft: 1 11/16" diameter 1018 cold roll -- Frame: Base constructed from 3" x 4" tubing, uprights constructed from 8" channel and 4" channel, head frame constructed from 3" x 4" x 3/8" angle and various flat bar -- Drive Motor: Charlyn 103-1032 hydraulic motor (or equivalent motor from alternate manufacturer) -- Hydraulic Requirements: 10 gpm & 950 psi -- Controls: not included in base price

Meadows Mills 14' Rollcase

Meadows Mills Spartan 6" Edger Gang

MEADOWS MILLS 2-STRAND SAWMILL STOP-N-LOAD LOG DECK -- Deck strands constructed with 4" x 8" x 1/4" wall tubing -- Chains run in 4" channel lined with UHMW wear strips -- Hydraulic Cylinder: One 2" x 12" with 1 1/2" rod -- Chain is WR-78 -- Front and rear crossbars are constructed with 6" wide flange beam -- Sawmill style stop-n-load -- Hydraulic drive with Auburn (or equivalent gear box from alternate manufacturer) gear box -- Strand spacing is determined by buyer, standard is 6 feet -- Controls: not included in base price -- Legs may be included for an additional cost -- Log decks are disassembled and bundled for shipment

MEADOWS MILLS 2 STRAND DEBARKER STOP-N-LOAD LOG DECK -- Deck strands constructed with 4" x 8" x 1/4" wall tubing -- Chains run in 4" channel lined with UHMW wear strips -- Hydraulic Cylinder: One 2" x 12" with 1 1/2" rod -- Chain is WR-78 -- Front and rear crossbars are constructed with 6" wide flange beam -- Debarker style stop-n-load -- Hydraulic drive with Auburn (or equivalent gear box from alternate manufacturer) gear box -- Strand spacing is determined by buyer, standard is 6 feet -- Controls: not included in base price -- Legs may be included for an additional cost -- Log decks are disassembled and bundled for shipment