Equipment For Sale

Meadows Mills 6” Spartan Gang/Edger

The Meadows Circle Mill #2 is a reliable used circular sawmill designed for efficiency and durability. It features a right-hand orientation with three head blocks for effective log management. The mill comes with a 12-foot carriage and a 40-foot track, supported by an all-steel frame ensuring robust operation. The sawmill is equipped with a 52-inch F-style blade, which delivers precise cuts suitable for various types of lumber. For added convenience, the machine includes an air and hydraulic system that enhances its operational efficiency. A chain log turner is also integrated, facilitating easy handling of logs. The equipment, having been in production in 2024, shows minimal wear, making it an excellent option for those seeking a dependable sawmill solution.

Meadows LH 3 Knee Circle Saw Mill 3 Head Block, Carriage. Track. Cab & Controls 52" Blade With Electric Motors. Believe it is a #2

Meadows #1 Mill, diesel power w/ Miner 332 edger, gas engine - Miner 332 portable edger – (2) saw, S/N 9700, rated 3” material, mounted on carriage, 4” rip fence, Kohler gas engine 25 HP w/ infeed & outfeed, (1) movable saw, additional saw plates, (4) adjustable legs that fold in, 20’ portable (2) strand log deck, hydraulic motor w/ hoist drive, H-78 chain, under carriage to relocate, Meadows # 1 24” (3) HB carriage, hand set works, hydraulic & electric dogs runs on phase converter w/ triple bearing husk frame, 56” inserted tooth saw, S/N 4MF-1439-94, chain type log turner w/ onboard hydraulics, foot control log dec, hand controls to actuate dogs & log turners, foot, blower under husk frame w/ discharge pipe, cuts 16’,14’ x 16” outfeed belt conveyor, (2) outfeed gravity roll case, axles for mobility w/ 60 Series 6-cylinder w/ PTO sheaves and fuel tank…$45,000 Also available with mill only both or one or the other can sell with mill. MILL MUST SELL FIRST Case 585E Construction King 4 x 4 forklift, S/N 409-05-9019, triple mast w/ rebuilt cylinder, 4,920 original hours…$16,500 International (early 90’s), gas engine w/ Serco 8000, S/N L3001 w/ outriggers w/ PTO & hydraulic motor & reservoir, 2,681 hours, 4BT Cummins engine…$16,500 Ref #207, Contact Ethan Mealer for more information (931) 607-4738

Meadows 5 HP Small Blower with Electric Motor

MEADOWS MILLS 3 STRAND SAWMILL STOP-N-LOAD LOG DECK -- Deck strands constructed with 4" x 8" x 1/4" wall tubing -- Chains run in 4" channel lined with UHMW wear strips -- Hydraulic Cylinder: One 2" x 12" with 1 1/2" rod -- Chain is WR-78 -- Front and rear crossbars are constructed with 6" wide flange beam -- Sawmill style stop-n-load -- Hydraulic drive with Auburn (or equivalent gear box from alternate manufacturer) gear box -- Strand spacing is determined by buyer, standard is 6 feet -- Controls: not included in base price -- Legs may be included for an additional cost -- Log decks are disassembled and bundled for shipment

MEADOWS MILLS 3 STRAND DEBARKER STOP-N-LOAD LOG DECK -- Deck strands constructed with 4" x 8" x 1/4" wall tubing -- Chains run in 4" channel lined with UHMW wear strips -- Hydraulic Cylinder: One 2" x 12" with 1 1/2" rod -- Chain is WR-78 -- Front and rear crossbars are constructed with 6" wide flange beam -- Debarker style stop-n-load -- Hydraulic drive with Auburn (or equivalent gear box from alternate manufacturer) gear box -- Strand spacing is determined by buyer, standard is 6 feet -- Controls: not included in base price -- Legs may be included for an additional cost -- Log decks are disassembled and bundled for shipment

MEADOWS MILLS 4 STRAND SAWMILL STOP-N-LOAD LOG DECK -- Deck strands constructed with 4" x 8" x 1/4" wall tubing -- Chains run in 4" channel lined with UHMW wear strips -- Hydraulic Cylinder: One 2" x 12" with 1 1/2" rod -- Chain is WR-78 -- Front and rear crossbars are constructed with 6" wide flange beam -- Sawmill style stop-n-load -- Hydraulic drive with Auburn (or equivalent gear box from alternate manufacturer) gear box -- Strand spacing is determined by buyer, standard is 6 feet -- Controls: not included in base price -- Legs may be included for an additional cost -- Log decks are disassembled and bundled for shipment

6" X 54" MEADOWS "TITAN" Combination gang-edger with 100HP drive motor, 5 saws on gang side and 18" edger side movement. Door on right. Laser movement. 48" roll width infeed and push button controls. 20 HP hydraulic system. Outfeed belt, 14' long. Very good condition. Price:  $45,000.00

Meadows Circular Sawmill 1 million + board feet per year 56" blade with new bits and shanks New factory built saw arbor and bearings from Meadows New factory built live feed conveyor Computer setworks 225 hp Detroit Some hydraulic hoses and wiring could be replaced Was making crossties

MEADOWS MILLS 36 DELUXE STATIONARY BOARD EDGER -- Handset board edger, all mechanical functions, and fixed feed speed -- Welded steel frame constructed with 6 inch channel and including legs -- Working height may be determined by buyer, standard is 36" -- Overall length of frame is 14 feet, bay is 36"; wide -- Four live bottom feed rolls and two overhead gravity pressure rolls -- Unison shifting saw collars, each with a 16"; diameter split carbide saw -- 30 HP electric motor mounted on edger -- 480 volt magnetic motor starter -- Belt drive with belt guard -- Infeed table with dead rolls -- Tailing device up to 16' long added to outfeed -- Laser lights aligned with each saw

MEADOWS MILLS 36 DELUXE STATIONARY BOARD EDGER -- Handset board edger, all mechanical functions, and fixed feed speed -- Welded steel frame constructed with 6 inch channel and including legs -- Working height may be determined by buyer, standard is 36" -- Overall length of frame is 20 feet, bay is 36"; wide -- Four live bottom feed rolls and two overhead gravity pressure rolls -- One stationary saw collar and one shifting saw collar, each with a 16"; diameter split carbide saw -- 30 HP electric motor mounted on edger -- 480 volt magnetic motor starter -- Belt drive with belt guard -- Infeed and outfeed tables with dead rolls -- Laser lights aligned with each saw

MEADOWS MILLS 36 DELUXE STATIONARY BOARD EDGER -- Hydraulic board edger, all push button functions, and variable feed speed with flow control -- Complete hydraulic power source belt driven from mandrel of edger, includes oil tank and oil cooler -- Welded steel frame constructed with 6 inch channel and including legs -- Working height may be determined by buyer, standard is 36" -- Overall length of frame is 20 feet, bay is 36"; wide -- Four live bottom feed rolls and two overhead gravity pressure rolls -- One stationary saw collar and one shifting saw collar, each with a 16"; diameter split carbide saw -- 60 HP electric motor mounted on edger -- 480 volt magnetic motor starter -- Belt drive with belt guard -- Infeed table and outfeed tables with dead rolls -- Laser lights aligned with each saw

MEADOWS #1 Automatic Sawmill;Complete with the following components and features: -- 15' Long 4 HB Carriage. -- Operator’s Cab, . -- Drive & Turner. -- Computer Setworks. -- YAMANI 4" Band Headrig. -- MEADOWS Titan 4" combo Edger also new in 2001; -- 30' x 24" Live Rolls. -- Electrical Switchgear. -- 33" Dia max. log. -- Capacity: 6,000 to 8,000 BF per day.NOTES: &#9679 Can be seen in operation.

Meadows 4 headblock carriage, Model; #3 DELUXE, good working condition

Hyd reservoir with oil cooler, approx 20 gal, good working condition

The Model 120H log turner utilizes two (2) 2 inch by 12 inch hydraulic cylinders with 1 1/2 inch bores to lift its head. The log turner chain comes standard with 13 teeth that are 1 inch wide. The head is chain driven by a Char-lyn 104-1253 hydraulic motor (included). The drive includes a 13 teeth and 25 teeth sprocket and number 80 chain with chain guard included. Controls, not included, with hoses sell for $2,490.00. 20 GPM Hydraulic power sources, not included, sell for $7,320.00. All prices are FOB North Wilkesboro, NC 28659. For questions please send an email to [email protected] or call 1-800-626-2282, ask to speak with Brian Hege. To place an order please call 1-800-626-2282, ask to speak with Brian Hege.

Meadows Chain Turner

Saw Mill Saw Cabin Track (3) peace’s Drop belt Saw Log Turner and transition Log deck 200 HP motor for saw mill

MEADOWS MILLS 120H Chain Log TurnerSpecifications: -- Hydraulic Cylinders: Two 2" x 12" with 1-1/2" diameter rod -- Turning Chain: #120 chain with 1" dog width and 13 bits -- Drive: H80TB13 sprocket with bushing, 80Q25 sprocket with bushing, #80 drive chain, and chain guard -- Drive Shaft: 2-3/16" diameter 1018 cold roll -- Idler Shaft: 2-3/16" diameter 1018 cold roll. Construction: -- Frame: Base constructed from 10" x 25.4 Lbs beam, feet constructed from 4" x 6" tubing, head frame: Constructed from 8" x 3" x 4" tubing -- Drive Motor: Charlyn 104-1253 hydraulic motor (or equivalent motor from alternate manufacturer) -- Hydraulic Requirements: 12 GPM & 950 PSI -- Controls: not included in the base price