Logging Attachments For Sale

COMPATIBLE W/40 TO 45 TON HEX GSH22B 2.50 CYD ORANGE PEEL GRAPPLE NO H LINK Online Owner's Manual

FACTORY WARRANTY THROUGH 8/5/23 FITS 305-306 CAT NEXT GEN MACHINES INCLUDES 585-0454 JUMPER LINES 5850431 WIRING HARNESS INCLUDES S40 24” HD DIG BUCKET, AND 48” S40 DC/ GRADING BUCKET Online Owner's Manual REQUIRES 570-7210 MULTIFUNCTION JOYSTICKS TRS6 – PART NUMBER 5858423 (PIN ON TOP) S40 BOTTOM WITH GRAPPLE TINES

FUSION INTERFACE INCLUDE: MILLYARD TOP CLAMP AND CONNECTOR LINES FROM COUPLER TO THE TOOL. LOG & LUMBER FORK 72" Online Owner's Manual REQUIRES:3RD VALVE,CONNECTOR LINES FROM MACHINE TO MACHINE TO COUPLER

FOR USE WITH FUSION QUICK COUPLER GRAPPLE AREA: 1.7 M2 2.03 YD2 Online Owner's Manual OVERALL HEIGHT CLOSED-OPEN: 1620MM (64") - 2664MM (105") OVERALL LENGTH: 1981MM (78") TINE LENGTH 1372MM (54") OVERALL WIDTH: 1800MM (70"), INCL. LINES AND "TURN TO CONNECT" QDS REQUIRES: 3RD VALVE ON MACHINE

CAT G126 Contractors Grapple FOR USE WITH: "CB" Linkage FOR USE WITH: PIN ON OR PIN GRABBER COUPLER Online Owner's Manual

54" TINES CATERPILLAR 86" MILLYARD FORKS FOR USE WITH: Fusion Quick Coupler and 938K/M only FUSION INTERFACE GRAPPLE AREA: 1.72 YD2 INCLUDES LINES AND "TURN TO CONNECT" QDs MAX OPENING BETWEEN CLAMP AND TINES= 84" REQUIRES: 3RD VALVE ON MACHINE SOLD AS IS

CATERPILLAR G149 CONTRACTOR GRAPPLE CATERPILLAR PART NUMBER 590-1869 INCLUDES PINS SOLD AS IS TB LINKAGE

48" TINES 60" CARRIAGE CATERPILLAR BACKHOE LOADER FORKS PIN ON LUGGING SOLD AS IS TINES- 2" THICK 5" WIDE

230v WITHOUT CONTROLLER AMPERAGE: 27 AMPS B LINKAGE DEMAGNETIZTION: 2-3 SECONDS GENERATOR POWER:9KW GRYB 36" HYDMAG POWERGRYP MAGNET MAGNET WITH INTEGRATED HYDRAULIC GENERATOR REQUIRED OIL FLOW: 24 GPM AT 2400 PSI REQUIRES HIGH PRESSURE- RETURN- AND CASE DRAIN HYDRAULICS SOLD AS IS VOLTAGE: 230V

18 TEETH ARM HYDRAULICS- CUSHIONED- 32GPM/ 3770 PSI DISC DIAMETER 57IN KERF- 2 5/16 IN Online Owner's Manual SAW HYDRAULICS- 30GPM/ 4500 PSI THROAT OPENING 51.20IN TILT, PARTIAL, AND FULL- 51GPM/ 3770 PSI WIDTH- BASE 67IN. HEIGHT- 115IN. MAX CUT DIAMETER 22.50IN.

1.00 CUBIC YARD CAPACITY 4 TINES 90mm pin 386MM spread CATERPILLAR GSH425 ORANGE PEEL GRAPPLE Includes Crosshead bracket for MH3250 and lines

1241 mm (48.8 in) Dual Bale Tines with IT Interface Rate Capacity (2,204 lb) Used for lifting and stacking of hay and straw bales.

60" TINES 98" WIDE CARRIAGE 52" TALL CATERPILLAR CONSTRUCTION FORKS MATERIAL HANDLING ARM NOT INCLUDED SOLD AS IS

CALL FOR PRICE

Dangle Head 3/4 pitch chain 37” bar. 26” cut in a single pass 35” cut with multiple passes remove the top, forks, big limbs also shovel log the tree stems Rebushed Cylinders repacked

USED CTR 36IP GROUND/SLASHER SAW. FULLY FUNCTIONAL AND READY TO GO HAS DOUBLE ENDED BAR AND NO LEAKS. CALL GAVIN AT 601-410-3416 OR Tim 251-366-3237 FOR MORE INFO

Groundsaw with a 12 foot base. Priced at $5,500. If interested in this groundsaw call Gavin 601-394-7796 Tim 251-366-3237 Kameron 251-242-5493 The groundsaw is located in State Line, Mississippi, 467 St Peter St

CTR 42 Bucksaw with 13 ft table- direct drive

Dymax 20" Ranch Axe Tree Shear Attachment S/N 170154 Like New Oversized Hydraulic Cylinders Quick Connect/Attach.

48” TINES 84” CARRIAGE 938M DYMAX LOG/LUMBER FORK FUSION INTERFACE