Biomass Equipment For Sale

2005 Bandit 150 Chipper 7300 hours Deutz intercooled engine No blow by New teeth New drum bearings New springs Good tires Work ready REDUCED

2006 Bandit 3680 Beast Recycler, C15 cat 545 HP Non-emissions engine with 9284 hours Radio Remote, Magnetic Head Pulley, 5th Wheel, Bandit rebuilt the mill area in 2019. Weight. 62500 lbs. Width. 130 in. Height. 162 in. Length. 528 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2010 Bandit 4680T Track Horizontal Grinder, Equipped with a Caterpillar C-27 1050 HP Engine,3700 Hours Currently, Undercarriage is 85%, Machine has 2" and 3" Screens, 2nd Owner, Wireless Control, New HG600 Clutch, New Head and Tail Shaft, New Conveyor Belt, Compressor on machine, Ready for Work. Weight 95,200 lbs Width 140 in Height 152 in Length 492 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

CAT (755HP) 37" DIAMETER X 36" WIDE DRUM WITH (6) KNIVES 30" DIAMETER X 36" WIDE TOP FEED WHEEL 10 5/8" DIAMETER X 36" WIDE BOTTOM FEED WHEEL STANDARD 7 ½" INFEED CONVEYOR FORESTRY STYLE DISCHARGE WITH HYDRAULIC SIDE/UP OR DOWN END DEFLECTOR AIR COMPRESSOR DOUBLE GROUSER TACK PADS 62,000 LBS

2023 Bandit SG40 WALK BEHIND Stump Grinder with only 41 hours. Features an aggressive cutter wheel drive system, enhanced operator visibility, and enhances stability. Operator controls are mounted on a 3-poisiton console. Two joysticks control the travel of the unit, while a single, easy to use joystick controls all cutter wheel functions. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2003 Bandit Model 5680 Beast Horizontal Grinder, Engine is a Cat 3412E V12 Engine, 1000 HP, Has 13,000 Hours, Wireless Remote, Air Compressor, Pintle Hitch, Ready to Grind. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2020 Bandit 19XP Chipper, Equipped with a Caterpillar 174 HP 6 Cylinder Turbo Diesel Engine, ONLY 1,500 Hours, Hydraulic Dual Rear Stabilizers, Hydraulic Tonge Jack, Hydraulic Winch, Telescoping Tongue Cylinder, Hand Crank Height Chute, Hydraulic Swivel Discharge Chute, Autofeed, Alloy Rims, Stainless Steel Tool Boxes, Extra Optional Hardware Tool Handler Package, Heavy Duty Bandit 21XP Undercarriage Modell Electric Brakes, Tandem Axles Ready to Work. Length: 20’ 9” Width: 7’ 9” Height: 9’ 2” Weight: 10,500 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2000 Bandit 3680 Horizontal Grinder, Cat H18 Engine, Wireless Remote Autofeed System, Fold Up Track. Needs Radio Remote. Ready to grind. Length: 44’ Width: 10’10” Height: 13’ 6” Weight: 62,500 lbs. Fuel Tank: 400 gal. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Bandit 250XP Chipper, Engine Meter is tough to read, Runs Solid, Hydraulic Winch, Telescoping Hitch, Autofeed, Caterpillar 140 HP Engine, Live Hydraulics, Hydraulic Lift Cylinder, Hand Crank Height Chute, Aluminum Tool and Battery Boxes, Electric Brakes. Length: 18’ 6” Width: 7’ 1” Height: 8’ 6” Weight: 7,200 - 7,800 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2008 Bandit 1890HD Chipper, Engine is a Cummins 213 Turbo Diesel, Tier 3, with 7400 Hours Showing, Hydraulic Winch, Hydraulic Swivel Discharge, Hand Crank Height Chute, 12000 Single Axle with (4) Tires, Twin Disc Clutch, Autofeed System,12 Volt Brakes, Live Hydraulics. Chipper Length 196.85 in Chipper Width 92.52 in Chipper Weight 9,700 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Bandit 3680 Horizontal Grinder with only 2,667 hours. Equipped with a 566HP Caterpillar engine. New tires, New set of teeth. Excellent condition. Length: 37’ 3” Width: 11’ 7” Height: 12’ 2” Weight: 85,000 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Bandit 3680 Beast Horzontal Grinder, Cat C27 with 2800 Hours, 30 Tooth Mill, Magnetic Head Pulley, Radio Remote. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Bandit 4680T Beast Recycler Horzontal Grinder, Cat C27 with 7000 hours, Magnetic head pulley, Radio remote. Massive amount of cutting & replacing/fabrication. We replaced hoses, pumps, motors, rebuilt valve bodies. Also rebuilt the entire hood. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Bandit 4680 Beast Recycler, Cat 3412 1,000hp with 6,000 hrs, 30 Tooth Mill, Radio Remote, Magnetic Head Pulley Length: 36’ Width: 10’ 11” Height: 13’4” Weight: 93,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2008 Bandit 255 Brush Chipper, Equipped with a Caterpillar 142 HP Turbo Diesel with 2500 Hours, Hydraulic Winch, Hydraulic Lift Cylinder, Autofeed System, Hand Crank Height and Swivel Chute, Ready for Work Length: 14' 4" Width: 7' 6" Height: 8' 9" Weight: 12,250 lbs (approximate) Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Bandit 200, 86 hp Cat Engine, winch, lift cylinder auto feed. Width. 72 in. Height. 100 in. Length (Open) 202 in. Weight. 5,500 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2009 Bandit 1900 Track Whole Tree Chipper, Cummins 535 HP Engine, Has 3900 Hours, Joystick Controls/Foot Pedal, Several Extra Sets of Knives, Counter Knives and Anvil , Undercarriage 75%, Enclosed Cab with Heat and AC, AC needs a Charge, New Clutch Engagement Switch Ready for the Woods. Weight 66,500 lbs. Length 285” Width 130” Height 142” Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Bandit 1590XP Chipper, Equipped with a Perkins/Cat 142 HP Turbo Diesel Engine, 4300 Hours, Hydraulic Winch, Hydraulic Lift Cyl, Autofeed System, New Tires, Ready for Work 15" Capacity. Length: 16' Width: 7' 5" Height: 8' 8" Weight: 9,000 pounds (approximate) Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2003 Bandit 200XP with 3,208 hours on 86 hp Cat engine. Has auto feed. Width. 72 in. Height. 100 in. Length (Open) 202 in. Weight. 5,500 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.