Biomass Equipment For Sale

2014 Bandit 2290 Track Whole Tree Chipper, Equipped with a Deere 600 HP, No DEF, Pro Heat, Infeed Chain, Wireless Remote, 314 Undercarriage is 85-90%, Reversing Fan, PT Tech Clutch, 2400 Original Hours, Ready for the Woods. Length: 21’ Width: 10’ 2” Height: 11’ 6” Weight: 40,000 - 46,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2022 Bandit SG40 Stump Grinder, Kohler 38 hp EFI Gas with 238hours, New Belts, 18” diameter x 1/2 thick New Revolution cutterwheel with 47” swing, Adjustable rubber tracks. L 100.5” W 29” H 48” Lbs 1,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Bandit 1850 Whole Tree Chipper Deere 325HP Turbo Engine, Engine had a complete engine rebuild 500 Hours Ago, 360 Degree Grapple Rotation, Heat and Ac in Cab Ac is not hooked up, ONLY 6,100 Original Hours, Joystick Controls. Length 282” Width 102” Height 156” Weight 20,000 lbs.

2017 Bandit Beast 4680T -1800 hours -1050 hp Cat c27 -Spare New Screens -48 tooth mill -New overband magnet -Newer discharge belt

2004 Bandit 1390 15 inch drum chipper with 142 hp Cat tier 3 engine winch lift cylinder (crusher) on top feed wheel. Auto feed, hydraulic swivel and height adjustable discharge chute. New tires, new knives and anvil 4,500 hours LENGTH (CLOSED): 188” LENGTH (OPEN): 218” WIDTH: 81” HEIGHT: 110” WEIGHT: 7,500 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Bandit Model 3090 Track Whole Tree Chipper, Only 500 Original Hours, Volvo Turbo 800 HP Diesel Engine, 24" Whole Tree Chipper 26" x 36", 6 Knife Chipper drum, Opening, Air Compressor, Undercarriage is 99%, Radio Remote Control System, 7-1/2' Infeed Conveyor, Hydraulic Discharge Chute for Discharge Ready to Chip. Length: 33’ 6” Width: 11’2” Height: 12’ 3” Weight: 59,000-62,000 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2023 Bandit 2590 Track Whole Tree Chipper, Equipped with a Caterpillar C-18 755 HP Diesel Engine, ONLY 150 Hours, Air Compressor, Radio Remote Control System, 22" Whole Tree Chipper, Infeed Chute is 7.5'' Long, Caterpillar 4 Year Warranty and Bandit 1 Year Warranty in Effect. Ready for the Woods. Width. 10' 2" Height. 12' 8" Length. 38' 5" Weight. 44,000 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2011 BANDIT 2290 TREE CHIPPER 4,500-5,000 HOURS C-13 440 HP ENGINE GOOD FEED CHAIN HYD CHUTE GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2015 Bandit 200UC Chipper -751 hours -74 hp kohler diesel -12 inch Ready to work

2020 Bandit 3680T BEAST Tracked Horizontal Grinder - 1416 Engine Hours - 900 Grinding Hours - Cat C27 w/ 875 HP - PT Fluid Clutch - Remote Control - Automatic Greaser - Automatic Chain Oiler - On-board air compressor - Adjustable Discharge - 36"" Capacity - 30 Tooth Cutter mill This machine was just ran through by the Quality Equipment & Parts Service Department. Bandit dealer of 10 Years. - Infeed Chain: New Headshaft and Tailshaft, new bearings, some new infeed slats - New teeth & rakers on cuttermill - New Screen & Gate - New Poly slide boards on Primary Discharge - New Anvil Bar - On-board air compressor serviced - New grease lines

BARKER Boiler and Fuel System built & tested in 2011 as a pilot unit. Successful testing has been completed. This surplus equipment includes the following main features: -- Combustion Temp Capability- 2,000 deg.F.; Steam Flow 24,000 lbs/hr saturated; Steam Pressure 1,500 PSI @ 600 deg. F. -- Fuel Feed rate - 3,000 Lbs/hr at 1/4" biomass (5% moisture) -- Heat Input - 7,500 btu/Lbs HHV @ 22 mmbtu/hr. -- All equipment has less than 2,500 actual operating hours since installation.EQUIPMENT MAJOR COMPONENTS: Combustor, Cyclonic combustion technology, Refractory lined Heat Recovery. Steam Generator. Rotary Drum Dryer for Fuel drying - capable of 30% moisture reduction (at the above combustion parameters) and 1.5 tons per hour (installed as used equipment).BALANCE OF PLANT FUEL FEED SYSTEM: Live-bottom bin, Bunker, Feed conveyors, Wood hog, Vibrating screen, Drag and screw conveyors. Boiler water system - feed pump,water and steam piping Emissions Control: All required baghouses (SJVUAPCD) California permitted. -- Now REDUCED PRICE from $1.5 million !!

New 2023 BARKO 930B Industrial Tractor Standard Options - Cummins QSL 8.9L T4 Final w/320 HP at 2,200 RPM - Fuel Tank 127 gallon (481 L) - DEF Tank 10 gallon (38 L) - Foot pedal operated hydraulic wet disk brake - Hydraulic axles with differential lock - Remote mounted cooler with auto reversing fan - Certified operators cab with A/C and heater - AM/FM radio with CD player - Nine (9) external LED cab lights 360 Degrees - Air knife windshield cleaning system - Left hand joystick steering, - MD4 7"" touchscreen display - Variable displacement pump and motor - Air compressor with filter and quick connect - High pressure filter on auxiliary circuit - In Cab hydraulic pressure diagnostics - Barko Telematic System (1 Year Free) INCLUDING THE FOLLOWING OPTIONS Industrial Tractor Foot Travel 30,000 # Hydraulic Winch Rear View Camera with Monitor 67Lx34-26 Primex 20 ply New 2023 SHEAREX HM-100SV2 100"" Mulching Head - 100"" Mulching Head Cutting Width - 36 Teeth on rotor - Optimal Target Diameter: 24"" - Approximate weight: 5,095 LBS - 2 x 110 CC Motors - Operating Speed: 2,300 RPM - Bolt on liner - Hydraulic pushbar - Front Deflector - Electronic controls - Barko Bracket - Maintenance Kit - Dewalt Grinder Kit 1 Year / 2,500 Hour Warranty

Available for Rent or Purchase, Clean 2019 Barko 930b Wheeled Mulcher with Ahwi head. Clean Machine Inside and Out.

Call for details.

Lightly used 2022 Barko 930B now in stock! This massive machine is equipped with the 67L tires and a Prinoth M650H-2350 mulching head. Powered by a 320HP Cummins QSL9 this mulching monster will take down almost anything in its path. Give us a call for more information! Now available!

2008 Barko 640 Forestry Mulcher with 2,500 hours. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2009 Barko 640 Excavator Mulcher with 3,430 hours. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Barko Model 937B Mulcher, Equipped with a Seppi Star Forest 260 Mulching Head, Cummins Engine with 3,100 Hours, Enclosed Cab with Heat and Air Conditioning, Ready for the Woods. Length Without Attachment 20' 8" Overall Width 8' 11" Overall Height 10' 8.5" Approximate Operating Weight 31,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

YM-800 1 YARD 4 OR 5 TINE Orange Peel GrappleSpecifications: -- Operating Weight 2,400lbs -- Opening Width 71 1/8" -- 4 or 5 Tine in stock - Ready to ship -- Rotating -- Hanger for Extra Cost

BOILER UNICONFORT MODEL CMT-50 | Wood Chip/Saw Dust | Never Used