BioMass Equipment For Sale

1998 Morbark 1300 Tub Grinder -9000 hours meter doesnt work but has original ecm can read it -Loader -Few minor leaks -Mill in great shape -Augers are freshly hard faced -Belts in good shape -New injectors -Comes with an extra set of new hammers and tub rollers -A/c blows ice cold

2009 Morbark 30/36 Tree Chipper -1045 Original hours -C13 440 HP -A/C blows cold -Clean tight chipper

Rebuilt Deere 600HP engine, 6 pocket 3/4" chip drum. Wireless Remote

1997 Morbark Model 16 Whole Tree Chipper, Enclosed Cab with Heat, No AC, Single Axle with (4) Tires, New Tires and Brakes, Cummins 250 HP Diesel Engine with 2200 Hours, Nice Running Machine Perfect for Clearing Lots Weight 8,500 lb Height 8.8 Width 7.1 Length 17.11 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Morbark 6600 very straight 7500hrs 1000hp 3412e 7500 hours, New mill 800 hours ago, Radial stacking conveyor, Very straight machine. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 MORBARK 23WCL WHOLE TREE CHIPPER 6 CYL CAT MORLIFT 500 BOOM CAB WITH AIR AND HEAT

Morbark 30-36 Portable Chipper 350HP Cummins Approx 4000 Hrs self Feeding Grapple Up to 18" Dia Material

1997 Morbark Model 20 Whole Tree Chipper, 250 HP Diesel Engine, Injection Pump installed over 300 HP , 3900 Hours are Showing, Heat in the enclosed cab, New Starter, New Tires and Brakes, 10 sets of extra knives, Ready for the Woods. H 11’5” W 8’6” L 22’9” 26,540 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Morbark M18RX 18" Drum Chipper, John Deere 4 cylinder, 4,248 hours, Good condition, Winch, knives. Height:9'4" Width:7'8" Length18'3" Gross weight (approximate):9,550 - 11,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

MORBARK MODEL 20 TRACK CHIPPER 5,888 HOURS CATERPILLAR 425 ENGINE RECENT ENGINE REBUILD RECENT CLUTCH PLATE RECENT BEARINGS GOOD UNDERCARRIAGE GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

1998 Morbark 2400 Chipper, ONLY 1800 Original Hours, Perkins 185 HP Turbo Diesel Engine, Hydraulic Tongue Jack, Hydraulic Lift Assist Cylinder, Twin Disc SP 211 Clutch, Tires are at 50%, In Excellent Condition. Two Owner Machine, Ready for Work. Weight: 15,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Morbark 50/48 Whole Tree Drum Chipper. 11,000 hours on a rebuilt 3412 CAT engine with 760HP, Auto Feed, Fire Suppression, Radio Remote and Tether cord. Machine was repainted. Length 40'8.25" Height 12'6" Width 9'9" Gross Weight (approx.) 72,120 lb

2021 Morbark 1821 Brush Chipper, Gas, Hydraulic Winch, One Owner Trade In.

2007 Morbark 950 Tub Grinder -3000 hours -CAT 3056EATTAC engine (172hp) -Ready to work -Videos available upon request

2014 Morbark 50/48 B NCL Whole Tree Drum Chipper, Cat 1050hp with 11,000 hours, Infeed chain, Remote. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1991 Morbark 27 Whole Tree Disc Chipper, Cat 3412 750hp with 200 hours on the rebuild, It’s going to need the paddles soon, The knife, pockets and face plates all 80% hood liners and everything else in there is about 70%. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Morbark 30/36 Mountain Goat -4145 hours -Grapple -Wireless remote -Caterpillar C15 Engine with auto clutch Ready to work

Cat C.88 liter engine, 3525 hr. In good working Condition CALL 641-898-7334

1993 Morbark Model 1200 Tub Grinder, Equipped with a Cummins 650 HP Engine, Autofeed, Wireless Control, New Clutch 1 year ago, Hours are Unknown, New Turbo, New Injectors 300 Hours ago, Ready to Work. Weight 55,622 lb Length 38.15 ft Width 11.9 ft Height 12.8 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Morbark 6600 Track Horzontal Grinder, Cat C32 1200 hp with 10,022 hours, Radio Remote, Magnetic Head Pulley. Work done. 5/23 fan pump replaced $8000 6/22 poclain feedwheel motor replaced. $20,000 4/24 Fan bearing replaced. $2000 5/24 yoke cylinders rebuilt. $500 5/24 new belly belt and all new parts associated with except the pulley drum. Shaft, b-locs and bearings replaced. Also metal siding and skirt. $8-10,000 6/24 2 new turbos. $12,000 6/24 new fan motor and side load adapter. $6500 6/24 feedwheel bearing replaced. Possibly shaft. $1500 6/24 discharge bottom bearings replaced Work done to infeed floor. Belly belt motor rebuilt. 3 injectors have been replaced. 2 out of 3 wiring harnesses replaced. Rebuilt fan motor. Has newer grates. (2) 8” hex. (2) 7x16 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.