Equipment For Sale

2019 TIGERCAT LX830D FELLER BUNCHER WITH TIGERCAT FELLING HEAD

2019 Tigercat Lx870D -5702 Tigercat head -Cuts 26" -5017 hours -Leveler -Tight and dry Woods ready

2004 Tigercat 822 -17500 frame hours -3500 hours on engine(8.3l Cummings)and hydraulic pump -UC 90% -Track motors and planetarys have low hours also -Boom is lined bored and has new pins and bushings -New swing bearing and rotary manifold -Has 5400 felling head on it and has a new style saw shaft on it -Cuts up to 21 inch timber More pictures of inside of cab coming soon!!!!

2010 TIGERCAT 480 MULCHER WITH FECON FGT9025 HEAD #209305 REBUILT ENGINE 5500 HRS

2008 H855 Tigercat -All major components have been done -Engine -Pumps -Rotec Bearing Swing Motor -Gearbox New Outer Feed motors -Waratah 622B -20,000 hrs on Carrier -Under 3500 hrs on all major components. -Lots of spare Waratah parts and spare engine.

2004 Tigercat 1018 forwarder Swivel Cab -16k hours -HTC computer and control system and hydraulic fine tuning system has 6500hrs since replacement -Articulation rams resealed and one has had new piston and rod done -Tires are getting towards the end probably 30% one is new -Everything works as it should -Air conditioner needs a new condenser unit -Injector pump was replaced 1000hrs ago -Doesn’t use any oil at all ( 8.3l Cummins 24valve) -Hydraulic pump was rebuilt by previous owner around 6000 hrs ago -Changed oil and filters every 150hrs and just recently done a service and all filters -Articulation joint and swivel joint is in new condition very tight smooth no play THIS IS IN AUSTRALIA!!!!!!!

2005 Tigercat 822 Hotsaw Swamp pads UC 95% Cummins Working daily STOCK IMAGE PHOTOS COMING SOON

2007 Tigercat 720E Feller Buncher Engine has 6,500 Original Hours, Enclosed Cab with Heat and Air Conditioning , Center Section is Tight Good Tires Ready for the Woods... Operating Weight 26,350lb Overall Length 18.59ft in Overall Width 8.34ft in Height To Top Of Cab 11ft in Wheelbase 9.59ft in Ground Clearance 1.68in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Tigercat 635G -9878 hours -Winch -New walking beam -Tight and dry -Tires insides-35.5 outsides-30.5 -Floaters 66x32 Ready to work PRICE REDUCED !!!!

2012 TIGERCAT 620D SKIDDER 15,000 HOURS GOOD TIRES TIGHT PINS AND BUSHINGS CLEAN CAB GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

Final drive for Tigercat 822C- drive motor available also

Tigercat 615E Boggie Skidder, 6871 hours, cab w/ AC, Dual Function Grapple , limb risers, stacking blade, less winch - Price Reduced! $100,000

2018 Tigercat 720G -6789 hours -5600 head -Disk @50% -Tight and dry -Tires @50% -One owner

2017 Tigercat 234B -12170 hours -New crate motor 1000 hours -New hydraulic pump 1500 hours -Def deleted -Ground saw -Csi 264 delimber -New bucket jaws -New bucket cylinders One Owner

2013 Tigercat 620D -13600 hours -New hydrostats and pumps 14 months ago -44x73 tires -Tight and dry -Winch

2011 Tigercat 620D -18000 frame hours -5000 hours on 6.7 reman engine -Winch -35.5 tires 3 are new one is 30% -Tight and dry

2011 Tigercat 234 Log Loader -14000 frame hours -4500 hours on reman engine -1500 hrs on swing bearing and turn motor -264 ultra -Big john hydraulic leg trailer

5702 saw, 30.5 tires, serviced and ready to work! One owner, excellent maintenance.  

2005 Tigercat 240B Log Loader -11412 frame hours -Heat/cold ac -Delimber -Lights -Decent tires -Brakes -New knives -New topping saw bar/chain -Good Tigercat grapple -On the job working

Very nice 2019 Tigercat dual arch skidder. Ran through our shop and everything checks out mechanically. All new pins and bushings. New glass. Joystick control. HD axles with 95% Firestones. Deep rubber 30.5s. Equipment financing and delivery available.